
1 / 2 · Click to enlarge
At a glance
This temperature and humidity sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; rated voltage (vdc) 2.4 to 5.5; model no. / name GY-SHT30-D. Check that your power source supplies 2.4 to 5.5 before connecting it.
Key Highlights
- Item Type: Sensor
- Rated Voltage (VDC): 2.4 to 5.5
- Model No. / Name: GY-SHT30-D
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Rated Voltage (VDC) | 2.4 to 5.5 |
| Model No. / Name | GY-SHT30-D |
| Response Time(s) | > 2s |
| Length (mm) | 12 |
| Width (mm) | 10 |
| Weight (g) | 5 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 4 × 3 × 2 cm |
Overview
The Unwelded GY-SHT30-D Digital Temperature and Humidity Sensor is listed in our temperature and humidity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Rated Voltage (VDC): 2.4 to 5.5 (match this to your power supply; too high a voltage can damage the part)
- Model No. / Name: GY-SHT30-D
- Response Time(s): > 2s
- Length (mm): 12 (measure your mounting space before ordering)
- Width (mm): 10 (measure your mounting space before ordering)
- Weight (g): 5 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is an Unwelded GY-SHT30-D Digital Temperature and Humidity Sensor. GY-SHT30-D module for the digital measurement of temperature and relative humidity that equips the known sensor SHT30. It also offers new features, such as improved signal processing and two distinct user-selectable I2C addresses. The CMOSens technology ensures excellent reliability and long-term stability. Each SHT3x is individually calibrated and the calibration coefficients are programmed into an OTP memory on the chip. The compact size and low power consumption make SHT30 the ultimate choice for even the most demanding.
Note: The actual product may vary in slight variation with the image shown depending upon quantity availability.
Note: GYVL53L0X printed on product working remains the same.
Features:
- Digital output for temperature and humidity
- High accuracy
- Low power consumption
- Small form factor
- I2C communication interface
- Wide operating voltage range
- Calibration coefficients stored on-chip
- Reliable and easy to use
- Sensor model: SHT30
- Humidity sensor resolution: 12-8 bit
- Temperature sensor resolution: 14-12 bit
- Read temperature accuracy: ± 0.3 ° C
- Read humidity accuracy: ± 3%
- I2C communication rate: 1MHz
- Read humidity range: 0-100%, 1% accuracy
- Read temperature range: -40 ~ + 125 ° C
Package Includes:
1 x Unwelded GY-SHT30-D Digital Temperature and Humidity Sensor
Quick specs
- Item Type
- Sensor
- Rated Voltage (VDC)
- 2.4 to 5.5
- Model No. / Name
- GY-SHT30-D
- Response Time(s)
- > 2s
- Length (mm)
- 12
- Width (mm)
- 10













