Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Upside Down Labs, this ecg emg and heart rate sensors is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3/5 V; impedance (ω) 10^12; no. of channels 1. Check that your power source supplies 3.3/5 V before connecting it.

Key Highlights

  • Operating Voltage (V): 3.3/5 V
  • Impedance (Ω): 10^12
  • No. of Channels: 1

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3.3/5 V
Impedance (Ω)10^12
No. of Channels1
Dimensions (L x W x H) mm25.4 x 10.0
Shipping Weight0.075 kg
Shipping Dimensions23 × 18 × 2 cm

Overview

The BioAmp EXG Pill (Assembled ECG/EMG/EOG/EEG Module), made by Upside Down Labs, is listed in our ecg emg and heart rate sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3.3/5 V (match this to your power supply; too high a voltage can damage the part)
  • Impedance (Ω): 10^12
  • No. of Channels: 1
  • Dimensions (L x W x H) mm: 25.4 x 10.0 (measure your mounting space before ordering)
  • Shipping Weight: 0.075 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 23 × 18 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

BioAmp EXG Pill is a one-of-a-kind pill-size chip that can record publication-grade biopotential signals from your body, be it from the heart (ECG), brain (EEG), eyes (EOG), and muscles (EMG). It is a powerful analog-front-end (AFE) biopotential signal-acquisition board that can be paired with any microcontroller unit (MCU) or single-board computer (SBC) with an analog-to-digital converter (ADC) such as Arduino UNO & Nano, Espressif ESP32, Adafruit QtPy, STM32 Blue Pill, BeagleBone Black, and Raspberry Pi Pico, to name just a few. It also works with any dedicated ADC, like the Texas Instruments ADS1115 and ADS131M0x, among others.  What makes it different? 
  • Record publication-quality biopotential signals like ECG, EMG, EOG, or EEG 
  • The small size (25.4 x 10.0mm) allows easy integration into mobile and space-constrained projects 
  • Powerful noise rejection makes it usable even when the device is close to the AC mains supply 
  • Pair it with any 3.3V or 5V compatible MCU with an ADC. 
  • Configure the gain, bandpass filter, and electrode count according to your requirements 
  • Compatible with Chords Software Suite (Chords Web, Chords Python, Chords LSL Connector) 

Features:

  1. Operating Voltage: 3.3/5 V
  2. Input Impedance: 10^12 Ω
  3. Compatible Hardware: Any ADC input
  4. Biopotentials: ECG EMG, EOG, or EEG (configurable bandpass) | By default configured for EEG and EOG
  5. No of channels: 1
  6. Electrodes: 2 or 3 (configurable) | By default configured for 3 electrodes
  7. Dimensions: 25.4 x 10.0 mm
  8. Open Source: Hardware + Software
Useful Links:   

Package includes:

1 x BioAmp EXG Pill

3 x Jumper cables

4 x Zip ties

1 x BioAmp cable V3

3 x 4 Gel Electrodes

Quick specs

Operating Voltage (V)
3.3/5 V
Impedance (Ω)
10^12
No. of Channels
1
Dimensions (L x W x H) mm
25.4 x 10.0
Shipping Weight
0.075 kg
Shipping Dimensions
23 × 18 × 2 cm
See all specifications