
1 / 2 · Click to enlarge
At a glance
Made by Vacus, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type IoT Development board module; model no. / name ESP32 LAN8720 PoE; main control (mcu) Espressif ESP32-WROOM-32E. Check that your power source supplies TI LM1117IMPX-3.3/NOPB (5V to 3.3V) before connecting it.
Key Highlights
- Item Type: IoT Development board module
- Model No. / Name: ESP32 LAN8720 PoE
- Main control (MCU): Espressif ESP32-WROOM-32E
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | IoT Development board module |
|---|---|
| Model No. / Name | ESP32 LAN8720 PoE |
| Main control (MCU) | Espressif ESP32-WROOM-32E |
| Voltage Regulator | TI LM1117IMPX-3.3/NOPB (5V to 3.3V) |
| Connectivity | 10/100 Ethernet + Wi-Fi 802.11 b/g/n + Bluetooth 4.2 (ESP32) |
| Buttons | BOOT, RST (Reset) |
| Output Connector | 5-pin, 2.0mm pitch JST side-entry male |
| Length (mm) | 100 |
| Width (mm) | 70 |
| Weight (g) | 38 |
| Shipping Weight | 0.043 kg |
| Shipping Dimensions | 11 × 8 × 3 cm |
Overview
The VACUS ESP32-LAN8720 PoE-R1 Module, made by Vacus, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: IoT Development board module
- Model No. / Name: ESP32 LAN8720 PoE
- Main control (MCU): Espressif ESP32-WROOM-32E (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Voltage Regulator: TI LM1117IMPX-3.3/NOPB (5V to 3.3V) (match this to your power supply; too high a voltage can damage the part)
- Connectivity: 10/100 Ethernet + Wi-Fi 802.11 b/g/n + Bluetooth 4.2 (ESP32) (check your phone or controller supports the same Bluetooth version for full range)
- Buttons: BOOT, RST (Reset)
- Output Connector: 5-pin, 2.0mm pitch JST side-entry male (confirm your cable or board uses the same connector)
- Length (mm): 100 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Vacus ESP32-LAN8720 PoE module is a compact, productionready board combining an Espressif ESP32-WROOM-32E wireless microcontroller with 10/100Base-T Ethernet (SMSC LAN8720A) and IEEE 802.3af-compatible Power-over-Ethernet input. The on-board AG9905M PoE converter delivers a regulated 5V/9W supply directly from the Ethernet cable, eliminating the need for a separate power supply. An LM1117 LDO provides a clean 3.3V rail for the ESP32 and peripherals. A CP2102-GMR USB-to-serial bridge with auto-boot circuitry enables plug-and-play firmware flashing via USB Micro-B. Expansion headers expose additional ESP32 GPIOs, and a JST connector provides power and serial I/O for host system integration.
Features:
- ESP32-WROOM-32E Wi-Fi + Bluetooth MCU
- 10/100 Ethernet via LAN8720A controller
- IEEE 802.3af PoE support (single cable power + data)
- AG9905M PoE converter (5V, up to 9W output)
- Onboard LM1117 3.3V voltage regulator
- CP2102 USB-to-serial with auto-boot
- JST connector for power and UART interface
- Expansion headers for GPIO access
Package Includes:
1 x VACUS ESP32-LAN8720 PoE-R1 ModuleQuick specs
- Item Type
- IoT Development board module
- Model No. / Name
- ESP32 LAN8720 PoE
- Main control (MCU)
- Espressif ESP32-WROOM-32E
- Voltage Regulator
- TI LM1117IMPX-3.3/NOPB (5V to 3.3V)
- Connectivity
- 10/100 Ethernet + Wi-Fi 802.11 b/g/n + Bluetooth 4.2 (ESP32)
- Buttons
- BOOT, RST (Reset)


















