Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 3.3 V evaluation board built around the FXOS8700CQ, combining a 3-axis accelerometer and 3-axis magnetometer for motion and orientation prototyping. It lets you test acceleration, magnetic field and event-detection behaviour quickly before designing the sensor into your own hardware.

Key Highlights

  • Combines 3-axis accelerometer and 3-axis magnetometer on one board
  • 3.3 V voltage rating for straightforward logic-level integration
  • Compact 80 x 40 mm footprint weighing about 8 g
  • Evaluation board format suited to breadboard and bench prototyping
  • Header pins included for quick wiring into a development setup
  • Useful for testing motion, tilt and magnetic-field sensing

Ideal For

  • Embedded engineers evaluating six-axis motion sensors
  • Robotics developers prototyping orientation sensing
  • Students learning accelerometer and magnetometer basics
  • Wearable device designers testing compact sensor layouts
  • Makers building motion-aware breadboard projects

Buying Tip

Check that your development board and power supply run at 3.3 V logic before wiring this evaluation board, since mismatched levels can damage the sensor.

Elecvora expert review

Our verdict

This is a focused evaluation board for anyone who needs to test combined acceleration and magnetic sensing without designing a carrier PCB first. It is simple, compact and supplied with header pins, though it is a development tool rather than a finished module.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Combines accelerometer and magnetometer on one board
  • Compact 80 x 40 mm size with low 8 g weight
  • Header pins included for quick wiring
  • Clear 3.3 V rating simplifies supply planning

Cons

  • No host board or power supply included
  • Requires soldering or assembly of header pins
  • Limited documentation details in the product listing

Best for

Bench evaluation and early prototyping of six-axis motion sensing

Not ideal for

Plug-and-play consumer use without a host system

Specifications

Item TypeEvaluation Board
Voltage Rating (V)3.3
Model No. / NameFXOS8700CQEVB
Length (mm)80
Width (mm)40
Weight (g)08
Shipping Weight0.01 kg
Shipping Dimensions9 × 5 × 2 cm

What's in the box

  • 1 x FXOS8700CQ 6-Axis Sensor evaluation board
  • 1 x Header pins

Frequently Asked Questions

What does this evaluation board measure?
It carries a 3-axis accelerometer and a 3-axis magnetometer, so it can be used to evaluate linear acceleration and magnetic-field sensing together.
What supply voltage does the board need?
The stated voltage rating is 3.3 V. Use a regulated 3.3 V supply and confirm your host board's logic levels match before connecting.
Are header pins included?
Yes, the package includes one evaluation board and one set of header pins. You will need to fit or solder them to your wiring setup.
Can I connect it directly to a computer?
The product data does not list a USB interface or onboard programmer, so a host microcontroller or development board is normally required for reading sensor data.
What is included in the box?
The box contains the FXOS8700CQ 6-axis sensor evaluation board and header pins. A power source and host system are not included.
How should I store and handle the board?
Keep it in an anti-static bag or similar protection when not in use, and avoid touching exposed contacts or applying voltage above the 3.3 V rating.

Overview

The Vacus FXOS8700CQ 6-Axis Sensor Evaluation Board is a compact development platform built around a combined accelerometer and magnetometer sensor. It is designed for engineers, students and makers who want to evaluate six-axis motion sensing before integrating a sensor into a finished product. The board measures 80 mm by 40 mm and weighs roughly 8 g, so it sits comfortably on a breadboard or bench setup.

With a 3.3 V voltage rating, the board fits neatly into common low-voltage prototyping environments. Header pins are supplied, letting you wire the board into an existing development kit and begin collecting acceleration and magnetic-field readings.

Key Features

  • Six-axis sensing: a 3-axis accelerometer and 3-axis magnetometer share one evaluation board.
  • Evaluation-ready format: the FXOS8700CQEVB layout is intended for rapid prototyping and bench testing.
  • Compact dimensions: 80 mm length and 40 mm width keep the board easy to place.
  • Lightweight: approximately 8 g board weight, with 0.01 kg shipping weight.
  • Header pins included: connect the board to your own wiring without sourcing extra headers.

Specifications Explained

Voltage rating (3.3 V): plan your supply and logic levels around a 3.3 V system. Confirm your host board's I/O levels match before connecting.

Board size (80 x 40 mm): a mid-sized evaluation board that leaves room for headers and probing while remaining portable.

Weight (8 g): negligible for most setups, and the 0.01 kg shipping weight reflects a small, light parcel.

Model FXOS8700CQEVB: use this identifier when checking documentation or comparing the board against other evaluation hardware.

Compatibility and Requirements

The board is supplied as an evaluation platform and requires a host system and power source, which are not included. Because the stated voltage rating is 3.3 V, match your supply and interface levels accordingly. The product data does not specify a particular microcontroller, shield format or connector standard, so verify your own wiring plan against the board's headers before powering it up.

Typical Uses

  • Bench evaluation of combined acceleration and magnetic-field sensing
  • Robotics and motion-control prototyping
  • Wearable and portable device concept testing
  • Student projects and sensor-learning exercises
  • Early-stage validation before a custom PCB design

What's in the Box

  • 1 x FXOS8700CQ 6-Axis Sensor evaluation board
  • 1 x Header pins

Quick specs

Item Type
Evaluation Board
Voltage Rating (V)
3.3
Model No. / Name
FXOS8700CQEVB
Length (mm)
80
Width (mm)
40
Weight (g)
08
See all specifications