Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 6S–14S power distribution board with six XT60 motor outputs, four XT60 payload outputs, two XT30 aux outputs and a 5V 2A BEC. It simplifies high-voltage power routing for multirotor and UAS builds.

Key Highlights

  • 6S–14S LiPo input range (22.2V–58.8V)
  • 6 x XT60 outputs for motor ESCs
  • 4 x XT60 payload outputs plus 2 x XT30 aux
  • DC-DC 5V 2A BEC for flight controller
  • Overcurrent and short-circuit protection on regulators
  • Operating temperature up to 180°C

Ideal For

  • Multirotor builders using 6S–14S LiPo packs
  • UAS integrators replacing an existing PDB
  • Hexacopter pilots needing six motor outputs
  • Payload-heavy platforms with multiple accessories
  • FPV and RC hobbyists working with high-voltage systems

Buying Tip

Check that your frame’s mounting holes match the 102mm x 49mm pattern and that your ESCs and payloads already use XT60 or XT30 connectors before buying.

Elecvora expert review

Our verdict

The Flightcore MK2 is a practical power distribution solution for high-voltage UAS builds that need many outputs and a built-in 5V BEC. Its protection features and wide voltage range make it a solid choice for complex multirotor setups.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 6S–14S input range
  • Six motor XT60 plus four payload XT60 outputs
  • Integrated 5V 2A BEC saves space
  • Overcurrent and short-circuit protection

Cons

  • Requires soldering or adapter cables for battery input
  • Fixed connector types may not match all equipment
  • No 12V BEC output specified

Best for

High-voltage multirotor and UAS builds needing multiple power outputs

Not ideal for

Small low-voltage builds or those requiring a 12V BEC

Specifications

Item TypeOther Accessories
Voltage Range (V)22.2V (6S LiPo) – 58.8V (14S LiPo)
No. of Outputs6 x XT60 for motor ESCs, 4 x XT60 for payload, 2 x XT30 for auxiliary/payload
BEC (Y/N)DC-DC 5V 2A Continuous (For Flight Controller)
Operating Temperature Max180°C
Weight (g)156 ±2
Mounting Style102mm x 49mm
Product Size110mm x 116mm x 25mm (L x B x H)
Shipping Weight0.53 kg
Shipping Dimensions16 × 16 × 13 cm

What's in the box

  • 1 x Vector PDB Flightcore MK2 (6S–14S)

Frequently Asked Questions

What battery voltage does the Flightcore MK2 support?
It supports 6S to 14S LiPo batteries, which corresponds to 22.2V to 58.8V.
How many motor ESCs can I connect?
There are six XT60 outputs dedicated to motor ESCs.
Does it include a BEC for the flight controller?
Yes, it has a DC-DC 5V 2A continuous BEC for the flight controller.
What is included in the package?
The package includes one Vector PDB Flightcore MK2 (6S–14S).
What is the operating temperature limit?
The maximum operating temperature is 180°C.
What are the mounting dimensions?
The mounting pattern is 102mm x 49mm, and the board measures 110mm x 116mm x 25mm.

Overview

The Vector Technics Flightcore MK2 is a power distribution board designed for unmanned aerial systems that run high-voltage lithium polymer packs. It accepts input from 6S to 14S batteries, covering 22.2V to 58.8V, and distributes that power through a set of XT60 and XT30 connectors. The board is intended as a direct replacement for an existing power distribution unit, so you can upgrade power routing without redesigning the whole frame.

With a 102mm x 49mm mounting pattern and a 110mm x 116mm x 25mm body, the Flightcore MK2 fits into many multirotor and UAS layouts. At 156g, it adds mass but provides a rigid, high-current distribution point. The board is rated for operating temperatures up to 180°C, which gives headroom in demanding environments.

Key Features

  • High-voltage input: Works with 6S to 14S LiPo packs.
  • Motor ESC outputs: Six XT60 connectors for motor ESCs.
  • Payload outputs: Four XT60 connectors for payload devices.
  • Auxiliary outputs: Two XT30 connectors for auxiliary or payload use.
  • Flight controller BEC: Integrated DC-DC 5V 2A continuous BEC.
  • Protection: Overcurrent and short-circuit protection on the regulators.
  • Thermal tolerance: Operating temperature maximum of 180°C.

Specifications Explained

Voltage range

The 22.2V to 58.8V range means the board can handle everything from a 6S pack to a 14S pack. This makes it suitable for high-voltage multirotor builds and larger UAS platforms where 12S or 14S batteries are common.

Outputs

Six XT60 outputs are provided for motor ESCs, which covers hexacopters and many multirotor configurations. Four additional XT60 outputs let you power payloads such as cameras, gimbals or other equipment directly from the board. Two XT30 outputs are available for auxiliary or lower-current payload items.

BEC

The onboard DC-DC converter delivers 5V at 2A continuous to power the flight controller. This removes the need for a separate BEC in many builds, simplifying wiring and saving space.

Protection

Overcurrent and short-circuit protection on the regulators helps protect the board and connected electronics from common wiring faults.

Mounting and size

The 102mm x 49mm mounting pattern and 110mm x 116mm x 25mm dimensions give you a clear idea of the footprint. Check your frame before ordering to ensure the board fits.

Compatibility and Requirements

The Flightcore MK2 is designed to replace existing power distribution units in unmanned aerial systems. It requires a 6S to 14S LiPo battery as input. You will need XT60 and XT30 connectors on your ESCs, payloads and auxiliary devices to match the board’s outputs. The 5V 2A BEC can supply a flight controller that accepts 5V input. No other compatibility details are specified.

Typical Uses

This board suits multirotor builds that need multiple motor outputs and payload power, such as hexacopters and industrial UAS. It is also useful for payload-heavy platforms that require several 12V or 5V accessories, and for anyone replacing a worn or limited PDB in an existing airframe.

What's in the Box

1 x Vector PDB Flightcore MK2 (6S–14S).

Quick specs

Item Type
Other Accessories
Voltage Range (V)
22.2V (6S LiPo) – 58.8V (14S LiPo)
No. of Outputs
6 x XT60 for motor ESCs, 4 x XT60 for payload, 2 x XT30 for auxiliary/payload
BEC (Y/N)
DC-DC 5V 2A Continuous (For Flight Controller)
Operating Temperature Max
180°C
Weight (g)
156 ±2
See all specifications