Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A VS1053 development board that adds MP3 playback and OGG real-time recording to Arduino projects. It has an onboard microphone, a TF card slot for storing audio, and separate 3.5 mm jacks for mic input and audio output.

Key Highlights

  • VS1053 chip handles MP3 playback and OGG real-time encoding
  • Onboard microphone plus separate 3.5 mm mic and audio jacks
  • TF card slot stores recordings and music for later playback
  • 12.288 MHz crystal and onboard capacitor filtering
  • AMS-1117 regulators supply 3.3 V and 2.5 V at up to 800 mA
  • Single 5 VDC power input with onboard indicator light

Ideal For

  • Arduino makers adding audio playback to a project
  • Students learning digital audio encoding and SPI control
  • Makers building voice memo or message playback devices
  • Interactive installation builders needing recorded sound cues
  • Electronics hobbyists experimenting with OGG recording

Buying Tip

Check that your project can supply a stable 5 VDC input and has free SPI pins before wiring this board in, since both are required for control and audio data.

Elecvora expert review

Our verdict

A practical audio module for Arduino users who want recording and playback without designing a circuit from scratch. The onboard microphone, TF slot and separate jacks make it quick to prototype with.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Recording and playback on a single board
  • Onboard microphone plus separate 3.5 mm jacks
  • TF card slot for removable storage
  • Regulated 3.3 V and 2.5 V rails from one 5 VDC supply

Cons

  • Requires a microcontroller and SPI wiring to operate
  • No TF card included
  • Recording format support is limited to what the VS1053 provides

Best for

Arduino makers prototyping audio recording and playback

Not ideal for

Users wanting a plug-and-play consumer music player

Specifications

Model No. / NameOther Boards
Output Frequency12.288 Mhz
Length (mm)63
Width (mm)56
Weight (g)20
Shipping Weight0.022 kg
Shipping Dimensions11 × 6 × 3 cm

What's in the box

  • 1 x VS1053 MP3 Recording Module Development Board with Onboard Recording Function

Frequently Asked Questions

What can this VS1053 board do?
It plays a range of music formats and supports OGG real-time encoding for recording. Recordings and music can be stored on a TF card.
How is it powered?
The board runs from a single 5 VDC supply. Onboard AMS-1117 regulators provide the 3.3 V and 2.5 V rails the circuit needs.
Does it work without a microcontroller?
The SPI interface and control signal lines are designed to be driven by a host microcontroller, so you need one to send commands and audio data.
Is a TF card included?
No. The package contains the VS1053 module only, so you need to supply your own TF card for storage.
How do I connect a microphone and speaker?
Use the onboard microphone or the separate 3.5 mm microphone jack for input, and the separate 3.5 mm output jack for headphones or a speaker.
What are the board dimensions?
The board measures approximately 63 mm by 56 mm and weighs about 20 g.

Overview

The Elecvora VS1053 MP3 Recording Module is a development board for Arduino users who want audio input and output in the same compact board. At its centre is the VS1053 audio chip, which plays common music formats and can encode recordings to OGG in real time. An onboard microphone lets you capture sound immediately, while a TF card slot gives you somewhere to store recordings and music files. Two separate 3.5 mm jacks keep microphone input and audio output on their own connections, so you can plug in an external mic or send sound to headphones or a stereo system.

Key Features

  • Playback and recording on one board: the VS1053 plays a range of music formats and supports OGG real-time encoding for captured audio.
  • Storage you can move: the TF card slot holds recorded files and music, and the card can be taken out to move recordings to another device.
  • Flexible audio connections: an onboard microphone, a line-in input and separate 3.5 mm jacks for microphone and speaker or headphone output.
  • Stable clock and filtering: a 12.288 MHz crystal oscillator and capacitor filtering support clean audio operation.
  • Regulated power: onboard AMS-1117 LDO chips provide 3.3 V and 2.5 V rails with up to 800 mA current from a single 5 VDC supply.
  • Easy status check: an onboard power indicator light shows when the board is powered.

Specifications Explained

The 12.288 MHz crystal is the reference clock for the audio chip, giving the VS1053 a stable timing base for encoding and playback. The AMS-1117 regulators convert a single 5 VDC input into the lower voltages the chip needs, and their 800 mA capacity covers the board's own requirements. The SPI interface and control signal lines are brought out to header points, which is what lets a microcontroller send commands and stream data to the module. Board dimensions of 63 mm by 56 mm and a weight of about 20 g keep it small enough for handheld and enclosure-based projects.

Compatibility and Requirements

The board is designed for SPI-based microcontroller projects, with the SPI interface and control lines exposed for wiring. It needs a single 5 VDC power supply. A TF card is required if you want to store recordings or music files on the board. Audio devices connect through the separate 3.5 mm microphone and output jacks.

Typical Uses

Use it to build a voice memo recorder, add spoken prompts to an interactive installation, create a sound-triggered display, or experiment with OGG encoding on a microcontroller. It also works well as a teaching board for learning how digital audio is captured, stored and played back.

What's in the Box

One VS1053 MP3 Recording Module Development Board with Onboard Recording Function.

Quick specs

Model No. / Name
Other Boards
Output Frequency
12.288 Mhz
Length (mm)
63
Width (mm)
56
Weight (g)
20
Shipping Weight
0.022 kg
See all specifications