Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DC12V thermostat module with an NTC probe, LED readout and 20A relay output for switching heating or cooling equipment. It measures from -50 to 90°C with 0.1°C resolution and sounds an over-temperature alarm.

Key Highlights

  • DC12V thermostat module with clear LED temperature display
  • Wide -50 to 90°C measuring and adjustable control range
  • 0.1°C resolution and approximately ±1°C accuracy
  • NTC sensor on a 1m cable for flexible probe placement
  • 20A relay output rated 125VAC or 14VDC
  • Automatic over-temperature alarm for safer operation

Ideal For

  • Makers building temperature-controlled enclosures and DIY projects
  • Technicians servicing freezers, chillers and water tanks
  • Hobbyists adding heating or cooling control to small systems
  • Electronics learners practising relay and sensor wiring
  • Users who need a compact panel-mounted temperature readout

Buying Tip

Confirm your load stays within the 20A 125VAC or 20A 14VDC relay rating and that you can supply a stable 12V DC input before ordering.

Elecvora expert review

Our verdict

A tidy, low-cost thermostat module that covers a wide temperature span and switches reasonable loads through its 20A relay. It is best treated as a component for a controlled 12V DC build rather than a finished appliance.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide -50 to 90°C range with 0.1°C display resolution
  • Relay output rated 20A at 125VAC or 14VDC
  • Compact 46 x 22mm board weighing 24g
  • 1m NTC probe cable allows remote sensing
  • Automatic over-temperature alarm

Cons

  • Requires a separate 12V DC supply
  • No enclosure or mounting hardware listed
  • Specified only for 20 to 85% relative humidity

Best for

DIY temperature control and monitoring projects with a 12V DC supply

Not ideal for

Wet or condensing environments or loads above the relay rating

Specifications

Voltage Rating12
Model No. / NameW1209WK
Temperature Control (°C)-50 to 90°C (Adjustable)
Opt. Relative Humidity(RH)20 to 85%
Resolution0.1°C
Accuracy± 1°C
Sensor TypeNTC sensor
Sensor Length (mm)1m
Output Capacity20A 125VAC Relay 20A 14VDC
Length (mm)46
Width (mm)22
Weight (g)24
Measuring Temperature (°C)-50 to 90°C
Shipping Weight0.03 kg
Shipping Dimensions8 × 8 × 4 cm

What's in the box

  • 1 x W1209WK DC12V LED Digital Thermostat Temperature Controller Regulator

Frequently Asked Questions

What supply voltage does the W1209WK need?
The module is designed for a 12V DC input at its terminals. Use a stable 12V DC source and check polarity before powering it.
What temperature range can it control?
The measuring and adjustable control range is -50 to 90°C, with 0.1°C resolution and approximately ±1°C accuracy.
How much load can the relay switch?
The relay output is rated at 20A 125VAC or 20A 14VDC. Keep the connected heating or cooling device within that rating.
What sensor is included?
An NTC sensor on a 1m cable is used to detect temperature. Route and secure the probe at the point you want to measure.
Does it have an alarm?
Yes, the module includes an automatic over-temperature alarm. It is not a substitute for independent safety protection.
What is included in the package?
The package includes one W1209WK DC12V LED digital thermostat temperature controller regulator. Other wiring and a 12V supply are not listed.

Overview

The W1209WK is a miniature temperature controller designed around a 12V DC supply. An NTC sensor on a 1m lead measures the temperature of the object or space you want to monitor, and the onboard relay switches your heating or cooling equipment according to the setpoint you choose. The LED display gives a direct reading, so you can check conditions at a glance without extra instruments.

With a 46 x 22mm board and a weight of just 24g, the module suits tight enclosures, panel cutouts and small DIY builds where space is limited.

Key Features

  • Adjustable control range: setpoints from -50 to 90°C.
  • Fine readout: 0.1°C resolution with approximately ±1°C accuracy.
  • Relay output: 20A at 125VAC or 20A at 14VDC for connected loads.
  • Over-temperature alarm: automatic alert when limits are exceeded.
  • Remote sensing: 1m NTC probe cable keeps the sensor where it is needed.

Specifications Explained

Temperature range and accuracy

The -50 to 90°C measuring range covers typical cooling, warming and enclosure-control tasks. A 0.1°C display step lets you see small changes, while the ±1°C accuracy figure tells you how closely the reading should track the real temperature.

Relay output

The output is a relay rated for 20A at 125VAC or 20A at 14VDC. That rating describes the switching contacts, not the module supply, so check your load against it before wiring.

Sensor and environment

The NTC sensor is supplied on a 1m cable. The module is specified for 20 to 85% relative humidity, so keep it away from condensation and wet conditions.

Compatibility and Requirements

The controller requires a 12V DC input at its terminals. The device you want to control is wired through the relay output and must stay within the stated 20A 125VAC or 20A 14VDC contact rating. The 1m NTC probe is the supplied sensing element; no other sensor type is specified.

Typical Uses

Common applications include domestic freezers, water tanks, refrigerators, industrial chillers, steamers and other temperature-controlled equipment, plus general DIY heating and cooling projects.

What's in the Box

One W1209WK DC12V LED digital thermostat temperature controller regulator is included. The package contents list does not name additional accessories, so plan wiring and a 12V supply separately.

Quick specs

Voltage Rating
12
Model No. / Name
W1209WK
Temperature Control (°C)
-50 to 90°C (Adjustable)
Opt. Relative Humidity(RH)
20 to 85%
Resolution
0.1°C
Accuracy
± 1°C
See all specifications