
1 / 3 · Click to enlarge
AI Summary
A compact DC24V microcomputer thermostat that switches a relay on or off when your target temperature is reached. It reads temperatures from -55°C to 120°C with 0.1°C resolution using a waterproof NTC10K sensor.
Key Highlights
- DC24V microcomputer thermostat with relay output for heating or cooling
- Wide -55°C to 120°C measuring range with 0.1°C resolution
- NTC10K waterproof sensor for reliable immersion and surface readings
- Clear red or blue LED display for easy at-a-glance monitoring
- Compact 71 x 39 mm body fits small panels and enclosures
- Settings are saved automatically after a short circuit
Ideal For
- Makers building temperature-controlled enclosures and projects
- Technicians servicing freezers, chillers and water tanks
- Hobbyists automating heating or cooling in small systems
- Operators of steamers and other temperature-regulated equipment
- Repair shops replacing a failed compact thermostat switch
Buying Tip
Confirm your supply is DC24V and check that your load stays within the relay rating for that voltage before wiring the controller in.
Elecvora expert review
Our verdict
A small, readable thermostat controller that covers a broad temperature range and handles both heating and cooling duties. It suits compact builds where a waterproof probe and clear LED readout matter more than advanced programming.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide -55°C to 120°C measuring range
- 0.1°C resolution and control accuracy
- Waterproof NTC10K sensor included
- Clear red or blue LED display
- Settings retained after a short circuit
Cons
- Requires a separate DC24V power supply
- Relay load must stay within the stated ratings
- No enclosure or mounting hardware listed
Best for
Compact heating and cooling control in tanks, freezers and small equipment
Not ideal for
High-voltage or high-current loads beyond the relay ratings
Specifications
| Voltage Rating | 24 |
|---|---|
| Model No. / Name | W3230 |
| Contact Capacity | 10A 220V / 20A 12V / 20A 24V Output Relay |
| Temperature Control (°C) | -55 ~ 120 |
| Display Color | red/blue |
| Resolution Ratio | 0.1°C(-9.9-99.9) |
| Control Accuracy | 0.1℃ |
| Measuring Accuraccy | ±0.1°C |
| Waterproof Level | NTC10K Waterproof sensor |
| Operating Temperature (°C) | -10 ~ 60 |
| Operating humidity | 20%~85% |
| Length (mm) | 71 |
| Width (mm) | 39 |
| Weight (g) | 44 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 8 × 4 × 3 cm |
What's in the box
- 1 x W3230 DC24V Digital Temperature Controller Microcomputer Thermostat Switch
Frequently Asked Questions
What power supply does the W3230 need?
Can it control both heating and cooling?
What temperature range can it measure?
Is the temperature sensor waterproof?
How much load can the relay handle?
Are my settings kept if power is interrupted?
Overview
The W3230 is a miniature digital temperature controller built around a microcomputer and a relay output stage. You set a target temperature, and when the reading from the connected NTC10K sensor reaches that point, the relay switches the attached device on or off. It supports both heating and cooling logic, so the same unit can manage a warming element or a refrigeration circuit depending on how you configure it.
The controller operates from a DC24V supply and measures temperatures across an unusually wide span, from -55°C up to 120°C. Readings are shown on a bright LED display, available in red or blue, with 0.1°C resolution through the -9.9°C to 99.9°C range.
Key Features
- Microcomputer control: relay switching triggered by your configured temperature setpoint.
- Heating or cooling modes: adapt the controller to warming or chilling applications.
- Waterproof NTC10K sensor: suited to tanks and other wet measurement points.
- High precision: 0.1°C control accuracy and ±0.1°C measuring accuracy.
- Parameter memory: saved settings survive a short circuit event.
- Compact footprint: 71 mm length and 39 mm width, 44 g unit weight.
Specifications Explained
Temperature range and accuracy
A -55°C to 120°C measuring span covers domestic freezers, chilled water and moderate heating duties. Control accuracy of 0.1°C and measuring accuracy of ±0.1°C mean fine adjustments are possible, and the 0.1°C resolution applies from -9.9°C to 99.9°C.
Relay output
The output relay is rated at 10A 220V, 20A 12V and 20A 24V, so the load you connect must stay within the matching rating for your supply voltage.
Sensor and environment
The supplied NTC10K sensor is waterproof, which makes it usable in water tanks and similar wet locations. The controller itself is intended for operation between -10°C and 60°C at 20% to 85% humidity.
Compatibility and Requirements
The controller requires a DC24V power supply to operate. It does not include a power supply, enclosure or mounting hardware in the listed contents. The load connected to the relay must respect the stated contact capacity for the voltage in use.
Typical Uses
Common applications include domestic freezers, water tanks, refrigerators, industrial chillers, steamers and other temperature-controlled equipment. Makers and technicians also use it in custom builds where a small, readable thermostat switch is needed.
What's in the Box
- 1 x W3230 DC24V Digital Temperature Controller Microcomputer Thermostat Switch
Quick specs
- Voltage Rating
- 24
- Model No. / Name
- W3230
- Contact Capacity
- 10A 220V / 20A 12V / 20A 24V Output Relay
- Temperature Control (°C)
- -55 ~ 120
- Display Color
- red/blue
- Resolution Ratio
- 0.1°C(-9.9-99.9)













