Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete pre-assembled 1.75mm direct extruder and all-metal hotend kit for 3D printers. It handles ABS and PETG at 200-280°C and includes the heater, thermistor, fan and duct.

Key Highlights

  • Pre-assembled direct extruder and hotend kit for 1.75mm filament
  • All-metal hotend design rated for 200-280°C printing
  • Compatible with ABS and PETG materials
  • 0.4mm nozzle, 40W 12V heater and 100K NTC thermistor included
  • 30 x 10mm cooling fan and blue injection-moulded fan duct supplied
  • Compact 40 x 62.14mm body weighing approximately 150g

Ideal For

  • Makers upgrading a 1.75mm printer to an all-metal hotend
  • Users printing ABS and PETG functional parts
  • Hobbyists building or maintaining a direct-drive extruder setup
  • Repairing a worn extruder assembly on a compatible printer
  • Workshops needing a spare hotend and extruder kit

Buying Tip

Confirm your printer uses 1.75mm filament and that your firmware supports a 100K NTC thermistor before ordering this kit.

Elecvora expert review

Our verdict

A practical all-in-one extruder and hotend kit that covers the essentials for 1.75mm ABS and PETG printing. The pre-assembled format and included heater, thermistor and fan make it a convenient replacement or upgrade.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-assembled for quicker installation
  • All-metal hotend rated for 200-280°C
  • Includes heater, thermistor, fan and duct
  • Compact and lightweight at about 150g

Cons

  • Requires a 12V supply and compatible firmware configuration
  • Limited to 1.75mm filament and ABS/PETG compatibility
  • Mounting compatibility must be checked before purchase

Best for

Makers printing ABS and PETG on 1.75mm direct-drive printers

Not ideal for

Printers using 2.85mm filament or non-12V heater systems

Specifications

Item TypeKit
CompatibilityABS, PTEG
Supported Nozzle Diameter (mm)0.4 mm
Filament Diameter1.75
Assembled (Y/N)Yes
Operating Temperature (°C)200-280
Operating Voltage (VDC)12
Power Consumption (W)40
Fan Size (mm)30 x 10
Cable Length1
Dimensions (L x W x H) mm40 x 62.14
Weight (g)150
Shipping Weight0.165 kg
Shipping Dimensions5 × 4 × 1 cm

What's in the box

  • 1 x 1.75mm Direct Extruder
  • 1 x Blue Fan Duct (injection-moulded PC)
  • 1 x Cooling Fan (12V)
  • 1 x 12V 40W Heater
  • 1 x 100K NTC Thermistor

Frequently Asked Questions

What filament size does this extruder kit use?
It is designed for 1.75mm filament only. Using other diameters will not feed correctly.
Which materials can I print with this kit?
The kit is compatible with ABS and PETG, within its 200-280°C operating range.
What voltage does the heater and fan require?
Both the 40W heater and the cooling fan operate at 12V DC. Make sure your printer's heater output and fan supply are 12V.
What is included in the box?
You receive the 1.75mm direct extruder, a blue injection-moulded PC fan duct, a 12V cooling fan, a 12V 40W heater and a 100K NTC thermistor.
Do I need to change my firmware settings?
Your firmware should be set for a 100K NTC thermistor. If your current setting differs, update it to match for accurate temperature readings.
What nozzle diameter is fitted?
The kit includes a 0.4mm nozzle, which is a versatile size for general-purpose printing.

Overview

The WANHAO 1.75mm Direct Extruder Full Kit is a complete, pre-assembled extruder and hotend unit for 3D printers that use 1.75mm filament. It pairs a direct-drive Wade-style extruder with an all-metal hotend, so the filament path is short and the assembly is ready to mount. The hotend is rated for operating temperatures of 200-280°C, which covers common engineering materials such as ABS and PETG. Because the hot zone uses an all-metal design, there is no PEEK or PTFE in the high-temperature region, giving you stable performance across the supported range. The kit ships with the essential heated and cooling components, including a 0.4mm nozzle, a 40W 12V heater, a 100K NTC thermistor, a 30 x 10mm fan and a blue fan duct.

Key Features

  • Complete kit: extruder, hotend, heater, thermistor, fan and duct are included for a straightforward installation.
  • Direct extruder design: the Wade-style direct drive keeps the filament path short for responsive extrusion and retraction.
  • All-metal hotend: rated for 200-280°C, suitable for ABS and PETG without PEEK or PTFE in the hot region.
  • 0.4mm nozzle: a versatile diameter for general-purpose printing with good detail and reasonable print times.
  • Compact and light: the assembly measures 40 x 62.14mm and weighs about 150g, adding little mass to the carriage.

Specifications Explained

The 1.75mm filament diameter is the most common standard, so this kit fits printers set up for that filament size. The 0.4mm nozzle is a balanced choice for everyday prints, offering fine enough detail for most models while keeping print times practical. The 12V operating voltage and 40W power consumption mean the heater draws about 3.3A at 12V, which is within the capacity of typical printer heater outputs. The 100K NTC thermistor provides temperature feedback to the controller, and the 30 x 10mm fan supplies part-cooling airflow. The 1-metre cable length gives reasonable reach from the extruder to the control board. With a 150g weight, the assembly is light enough for most direct-drive setups.

Compatibility and Requirements

This kit is designed for 1.75mm filament and is compatible with ABS and PETG. It operates at 200-280°C and requires a 12V DC supply for the heater and fan. The included thermistor is a 100K NTC type, so your printer firmware must be configured for that sensor type or adjusted accordingly. Because it is a direct extruder kit, it is intended for printers that use a direct-drive configuration or can be adapted to one. Check that your printer's mounting arrangement and heater output can accommodate the 40W load before installation.

Typical Uses

This kit is useful for replacing a worn or underperforming extruder on a 1.75mm printer, upgrading to an all-metal hotend for ABS and PETG work, or building a direct-drive setup for more precise extrusion. It suits hobbyists and makers who print functional parts, enclosures, brackets and mechanical components that benefit from the temperature range of ABS and PETG.

What's in the Box

  • 1 x 1.75mm Direct Extruder
  • 1 x Blue Fan Duct (injection-moulded PC)
  • 1 x Cooling Fan (12V)
  • 1 x 12V 40W Heater
  • 1 x 100K NTC Thermistor

Quick specs

Item Type
Kit
Compatibility
ABS, PTEG
Supported Nozzle Diameter (mm)
0.4 mm
Filament Diameter
1.75
Assembled (Y/N)
Yes
Operating Temperature (°C)
200-280
See all specifications