
1 / 5 · Click to enlarge
AI Summary
A compact inline flowmeter that outputs pulses proportional to water flow from 0.3 to 6 L/min. It runs on 3.5 to 24 VDC and connects easily to a microcontroller for flow monitoring and control.
Key Highlights
- Measures flow from 0.3 to 6 L/min with pulse output
- Wide 3.5 to 24 VDC operating voltage range
- Low 0.015 A current draw for battery-friendly builds
- Compact 58 x 35 mm body weighing about 30 g
- Standard 3.5 mm nozzle for simple inline fitting
- Hall effect sensing with insulation resistance above 100 MOhm
Ideal For
- Makers building Arduino-based flow monitoring projects
- Technicians servicing coffee makers and beverage machines
- Garden automation hobbyists controlling sprinklers
- Students learning about Hall effect sensors and pulse counting
- Small equipment builders needing inline flow feedback
Buying Tip
Confirm your tubing or fittings match the 3.5 mm nozzle size and that your controller can count pulses before ordering.
Elecvora expert review
Our verdict
A simple, low-cost inline flow sensor that does one job well: turning water movement into countable pulses. It is a sensible choice for prototype and small-system flow monitoring where the 0.3 to 6 L/min range fits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 3.5 to 24 VDC operating range
- Low 0.015 A current draw
- Compact and lightweight at 58 x 35 mm and 30 g
- Simple pulse output for microcontroller use
Cons
- Needs an external controller to read and display flow
- Limited to a 0.3 to 6 L/min range
- No display or onboard processing
Best for
Makers and technicians monitoring low flow rates in small water systems
Not ideal for
High-flow or industrial installations outside the 0.3 to 6 L/min range
Specifications
| Max Water Flow(L/min) | 0.3 to 6 |
|---|---|
| Operating Voltage (VDC) | 3.5 to 24 |
| Operating Current (A) | 0.015 |
| Insulation Resistance (MOhm) | >100 |
| Length (mm) | 58 |
| Width (mm) | 35 |
| Weight (g) | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 6 × 4 × 2 cm |
What's in the box
- 1 x YFS401 Water Flow Sensor, white
Frequently Asked Questions
How does the YFS401 report flow rate?
What voltage does it need?
Can I use it without a microcontroller?
What flow range does it measure?
What size connection does it use?
What is included with the sensor?
Overview
The Generic YFS401 is an inline water flow sensor built around a white plastic valve body, a magnetic rotor and a Hall effect sensor. As liquid moves through the sensor, the rotor turns and the sensor converts that motion into a pulse signal. By counting those pulses with a microcontroller, you can estimate how much water is passing through and act on that reading.
Its measuring range of 0.3 to 6 L/min covers many small pumps, beverage machines and garden watering lines, and the 3.5 mm nozzle size keeps plumbing straightforward for compact builds.
Key Features
- Pulse output that varies with flow rate for microcontroller counting
- Broad 3.5 to 24 VDC supply range for flexible powering
- Low 0.015 A operating current
- Insulation resistance above 100 MOhm
- Compact 58 x 35 mm footprint and roughly 30 g weight
Specifications Explained
Flow range
The 0.3 to 6 L/min range defines where the sensor gives meaningful readings. Below the low end the rotor may not turn reliably; above the top end readings may not be accurate.
Voltage and current
Operating from 3.5 to 24 VDC means the sensor can share a supply with many common development boards and small control systems. The 0.015 A draw is modest, so it adds little load to a project's power budget.
Size and insulation
At 58 mm long, 35 mm wide and 30 g, the sensor fits into tight enclosures and short pipe runs. Insulation resistance above 100 MOhm indicates good electrical separation between the sensing side and the fluid path.
Compatibility and Requirements
The sensor provides a pulse signal, so it needs an external controller or counter to interpret the output; it does not display flow on its own. Plan for a 3.5 to 24 VDC supply within the stated range and a microcontroller input capable of counting pulses. Fittings must match the 3.5 mm nozzle size.
Typical Uses
- Monitoring water flow in coffee makers and beverage equipment
- Sprinkler and irrigation control projects
- Arduino and other microcontroller flow experiments
- Small pump and dosing line feedback
- Educational and prototype fluid systems
What's in the Box
One YFS401 water flow sensor, white, as described.
Quick specs
- Max Water Flow(L/min)
- 0.3 to 6
- Operating Voltage (VDC)
- 3.5 to 24
- Operating Current (A)
- 0.015
- Insulation Resistance (MOhm)
- >100
- Length (mm)
- 58
- Width (mm)
- 35













