Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
WAVESHARE 7inch LCD IPS 1024x600 Display for Raspberry Pi,DPI Interface — image 1
Hover to zoom

1 / 5 · Click to enlarge

WAVESHARE 7inch LCD IPS 1024x600 Display for Raspberry Pi,DPI Interface

Color
AI Summary
Battery Protection Module for everyday users

The WAVESHARE 7inch LCD IPS 1024x600 Display for Raspberry Pi,DPI Interface is a mid-range battery protection module designed for everyday users. It features One Package Weight: 0.35kgs / 0.77lb and One Package Size: 20cm * 12cm * 10cm / 7.87inch * 4.72inch * 3.94inch.

₹4,539
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹4,539
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.35kgs / 0.77lb
One Package Size: 20cm * 12cm * 10cm / 7.87inch * 4.72inch * 3.94inch
Best Sellers Rank (Consumer Electronics): #5742
Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #164
Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > LCD & LED Display Module): #47

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: S-DIY1209Category: Battery Protection Module

About This Product

The WAVESHARE 7inch LCD IPS 1024x600 Display for Raspberry Pi,DPI Interface is a mid-range battery protection module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.35kgs / 0.77lb
  • One Package Size: 20cm * 12cm * 10cm / 7.87inch * 4.72inch * 3.94inch
  • Best Sellers Rank (Consumer Electronics): #5742
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #164
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > LCD & LED Display Module): #47 — crisp, vibrant visuals in any lighting

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. 1024x600 high resolution 2. Compatible with Raspberry Pi 2B/3B/Zero/Zero W 3. The TFT LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz 4. Supports Raspbian, Ubuntu, OSMC, etc. 5. Backlight can be turned off to lower power consumption 6. Compact size, suit for various projects 7. Note: This item can be used for displaying ONLY

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.