
1 / 4 · Click to enlarge
AI Summary
This shield powers your WeMos D1 mini from a single 3.7V lithium battery, boosting it to 5V at up to 1A. Recharge via Mini USB and monitor status with red/green LEDs.
Key Highlights
- Converts 3.3-4.2V lithium battery to 5V output
- Delivers up to 1A for D1 mini and shields
- Mini USB charging port for easy recharging
- Red and green LEDs show charging status
- Jumper selects 0.5A or 1A charging current
- Compact 30 x 28 mm board weighs only 5 g
Ideal For
- Makers building portable D1 mini projects
- IoT enthusiasts creating battery-powered sensor nodes
- Students learning about lithium battery power
- Hobbyists needing untethered operation
Buying Tip
Remember to order a 1S lithium battery with an XH2-2.54mm connector and a Mini USB cable separately, as neither is included.
Elecvora expert review
Our verdict
A practical, no-fuss solution for powering D1 mini projects from a single lithium cell. It integrates charging and boosting into one tiny board, though you'll need to supply your own battery and cable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated boost converter and charger
- Compact and lightweight
- Clear charging status LEDs
- Selectable charging current
Cons
- Battery and Mini USB cable not included
- Limited to 1A output, may not power high-draw shields
Best for
Portable D1 mini projects
Not ideal for
Projects requiring more than 1A or multi-cell batteries
Specifications
| Output Voltage | 5 |
|---|---|
| Output Current (A) | 1 |
| Battery cell type | 1S |
| Charging Current | 1 |
| Charging Voltage | 10V MAX 5V Recommended |
| Battery Voltage (V) | 3.3-4.2V (lithium) |
| Power Supply Voltage (V) | 5V (Max 1A) Boost |
| Length (mm) | 30 |
| Width (mm) | 28 |
| Weight (g) | 5 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 30 × 25 × 5 cm |
What's in the box
- 1 x WeMos D1 Lithium Battery Charger Board with Mini USB
Frequently Asked Questions
What battery type does this board require?
Can I charge the battery while the board is powering my D1 mini?
What is the purpose of the J1 jumper?
Does the board include a battery or USB cable?
How do I know when the battery is fully charged?
Overview
The WeMos D1 Lithium Battery Charger Board is a dedicated power shield for the WeMos D1 mini and D1 mini Pro development boards. It allows you to run your projects from a single 1S lithium battery (3.3-4.2V) instead of a tethered USB cable, making your designs truly portable. The onboard DC-DC converter boosts the battery voltage to a regulated 5V, supplying up to 1A to the D1 mini and any stacked shields.
Charging is straightforward: connect a Mini USB cable to the board's charging port, and the built-in charger will replenish the battery. A red LED lights while charging is in progress, and a green LED indicates when charging is complete. A jumper (J1) lets you set the maximum charging current to either 0.5A or 1A, giving you flexibility based on your battery capacity and power source.
Key Features
- Powers WeMos D1 mini from a single 3.7V lithium cell
- Boost converter outputs 5V at up to 1A
- Mini USB charging port with automatic recharge
- Red LED for charging, green LED for full charge
- Jumper-selectable charging current: 0.5A or 1A
- Compact footprint: 30mm x 28mm, 5g
Specifications Explained
Output Voltage (5V): The board provides a stable 5V output, matching the USB power specification that the D1 mini expects. This ensures reliable operation even as the battery voltage drops.
Output Current (1A): With a maximum output of 1A, the board can power the D1 mini along with typical low-power shields. Keep in mind that high-current peripherals may exceed this limit.
Battery Cell Type (1S): Designed for single-cell lithium batteries with a nominal voltage of 3.7V and a range of 3.3-4.2V. Do not connect multi-cell packs.
Charging Current (1A): The default charging current is 1A, but you can reduce it to 0.5A via the J1 jumper. Choose a rate appropriate for your battery's capacity.
Charging Voltage: The charging port accepts a 5V supply (max 1A) from a standard USB source. The board handles the charging profile for lithium batteries.
Dimensions and Weight: At 30mm x 28mm and just 5g, the board adds minimal bulk to your project.
Compatibility and Requirements
This shield is specifically designed for the WeMos D1 mini and D1 mini Pro. It requires a 1S lithium battery (3.3-4.2V) connected via the XH2-2.54mm port. For charging, a standard 5V USB power source and a Mini USB cable (not included) are needed. The board does not include a battery or USB cable.
Typical Uses
- Portable IoT sensor nodes
- Battery-powered weather stations
- Remote control projects
- Wearable electronics
- Any D1 mini project requiring untethered operation
What's in the Box
1 x WeMos D1 Lithium Battery Charger Board with Mini USB.
Quick specs
- Output Voltage
- 5
- Output Current (A)
- 1
- Battery cell type
- 1S
- Charging Current
- 1
- Charging Voltage
- 10V MAX 5V Recommended
- Battery Voltage (V)
- 3.3-4.2V (lithium)













