
1 / 3 · Click to enlarge
AI Summary
A compact 22mm panel-mount LED ammeter indicator with a square white cover, 0-100A range, 220VAC rating and a supplied transformer. It gives a clear 7-segment current readout on dashboards, control panels and test rigs.
Key Highlights
- 0-100A current range with 7-segment LED display
- Standard 22mm mounting hole for quick panel fitting
- 220VAC voltage rating with transformer included
- Square white cover with 28mm head diameter
- Lightweight plastic body at approximately 35g
- Low power consumption for continuous panel use
Ideal For
- Panel builders fitting standard 22mm indicator cutouts
- Technicians monitoring current on 220VAC equipment
- Makers building test rigs and bench power setups
- Equipment manufacturers needing a compact current display
- Repair benches checking current draw during service
Buying Tip
Confirm your panel cutout is 22mm and your supply is 220VAC before ordering, and keep the supplied transformer with the meter for installation.
Elecvora expert review
Our verdict
A tidy, lightweight panel ammeter that fits standard 22mm cutouts and covers a wide 0-100A span for 220VAC installations. The included transformer simplifies the sensing side, making it a practical choice for control panels and test rigs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 0-100A measurement range
- Standard 22mm mounting hole simplifies panel fitting
- Transformer included for the sensing side
- Clear 7-segment LED readout
- Lightweight plastic body at about 35g
Cons
- Rated for 220VAC only, so lower-voltage panels need a different unit
- No mounting hardware or extra accessories confirmed in the box
- Wiring must suit loads up to 100A
Best for
Panel builders and technicians monitoring current on 220VAC equipment
Not ideal for
Low-voltage DC projects or panels without a 22mm cutout
Specifications
| Voltage Rating | 220VAC |
|---|---|
| Rated Current (A) | 100 |
| Model No. / Name | AD16- 22FSA |
| Material | Plastic |
| Color | White |
| Head Diameter (mm) | 28 |
| Mounting Hole Diameter (mm) | 22 |
| Weight (g) | 35 |
| Shipping Weight | 0.036 kg |
| Shipping Dimensions | 12 × 8 × 1 cm |
What's in the box
- 1 x White 0-100A 22mm AD16-22FSA Square Cover LED Ammeter Indicator Light with Transformer
Frequently Asked Questions
What current range does this ammeter display?
What supply voltage does it need?
What size hole do I need in my panel?
Is the transformer included?
How much does the meter weigh?
How should I care for the display?
Overview
The AD16-22FSA is a panel-mount ammeter indicator designed to show current readings on control panels, dashboards and equipment enclosures. It pairs a 7-segment LED display with a square white cover, so the readout stays legible while the unit blends into a clean panel layout. The 0-100A range covers a broad span of current monitoring tasks, and the included transformer supports the sensing side of the installation.
With a 22mm mounting hole and a 28mm head diameter, the meter drops into the same cutouts used by many panel indicators. The plastic housing keeps the unit light at around 35g, which matters on chassis and portable builds where every gram counts.
Key Features
- 7-segment LED display for a clear numeric current readout.
- 0-100A range suited to a wide variety of monitoring setups.
- 220VAC voltage rating for mains-powered panel installations.
- Square white cover with a compact 28mm head.
- 22mm mounting hole for straightforward panel installation.
- Low power consumption so it can stay on during long monitoring sessions.
- Lightweight plastic construction at approximately 35g.
Specifications Explained
Rated current (100A) is the upper end of the measurement range. Match your expected load to this figure so the meter operates within its stated span.
Voltage rating (220VAC) tells you the supply class the indicator is built for. Confirm your panel supply matches before wiring.
Mounting hole (22mm) is the cutout size you need in the panel. The 28mm head diameter is the visible face once fitted, so leave enough clearance around the hole for the square cover.
Transformer is supplied with the meter and forms part of the current-sensing arrangement. Keep it with the unit during installation and do not substitute parts unless you have confirmed they suit the same rating.
Compatibility and Requirements
The meter is intended for 220VAC panels and a 22mm cutout. It measures current up to 100A, so plan wiring and conductors around the load you intend to monitor. The included transformer must be used as part of the installation. No other accessories, leads or mounting hardware are confirmed in the product data, so check your panel fittings before starting.
Typical Uses
- Control panels and switchboards that need a local current readout.
- Test rigs and bench setups where current draw is monitored during runs.
- Equipment enclosures and chassis builds with standard 22mm indicator cutouts.
- Repair and service benches checking current on mains-powered gear.
- Small machines and project builds where a compact display is preferred.
What's in the Box
1 x White 0-100A 22mm AD16-22FSA Square Cover LED Ammeter Indicator Light with Transformer.
Quick specs
- Voltage Rating
- 220VAC
- Rated Current (A)
- 100
- Model No. / Name
- AD16- 22FSA
- Material
- Plastic
- Color
- White
- Head Diameter (mm)
- 28













