Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Winsen, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type CO2 Sensor; model no. / name MH Z19C; detection gas CO2. Check that your power source supplies 5.0±0.1V DC before connecting it.

Key Highlights

  • Item Type: CO2 Sensor
  • Model No. / Name: MH Z19C
  • Detection Gas: CO2

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCO2 Sensor
Model No. / NameMH Z19C
Detection GasCO2
Operating Voltage5.0±0.1V DC
Avg. Current Consumption<40mA (@5V power supply)
Peak Current (mA)125mA (@5V power supply)
Interface Type3.3 V (Compatible with 5V)
Detecting Range400~10000ppm (optional)
Signal OutputUART (TTL level 3.3V), PWM
Preheat time1 min
Response Time(s)T90 < 120 s
Length (mm)33
Width (mm)19.7
Weight (g)5
Shipping Weight0.02 kg
Shipping Dimensions3 × 2 × 1 cm

Overview

The Winsen MH-Z19C NDIR CO2 Sensor HVAC/IAQ, made by Winsen, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: CO2 Sensor
  • Model No. / Name: MH Z19C
  • Detection Gas: CO2
  • Operating Voltage: 5.0±0.1V DC (match this to your power supply; too high a voltage can damage the part)
  • Avg. Current Consumption: <40mA (@5V power supply) (your supply must deliver at least this much current)
  • Peak Current (mA): 125mA (@5V power supply) (your supply must deliver at least this much current)
  • Interface Type: 3.3 V (Compatible with 5V) (confirm your cable or board uses the same connector)
  • Detecting Range: 400~10000ppm (optional) (quoted range is usually line-of-sight; walls and interference shorten it)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Winsen MH-Z19Z19C NDIR CO2 Sensor infrared gas module is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART output and PWM output. It is developed by the tight integration of mature infrared absorbing gas detection technology, precision optical circuit design, and superior circuit design.

Applications:

HVAC refrigeration, Air cleaner device, Indoor air quality monitoring, Smart home, Ventilation system

Note: 1) Actual product may vary in terms of design. 2) For applications in industrial or high-CO₂ conditions, SKU 1278801 is recommended.

Features:

  1. Chamber is Gold-plated
  2. High sensitivity, low power consumption
  3. Good stability
  4. Temperature compensation, excellent linear output
  5. Multiple output modes: UART, PWM
  6. Long lifespan
  7. Anti-water vapor interference, anti-poisoning

Package Includes:

1 x Winsen MH-Z19C NDIR CO2 Sensor for HVAC and IAQ

 

Quick specs

Item Type
CO2 Sensor
Model No. / Name
MH Z19C
Detection Gas
CO2
Operating Voltage
5.0±0.1V DC
Avg. Current Consumption
&lt;40mA (@5V power supply)
Peak Current (mA)
125mA (@5V power supply)
See all specifications