
At a glance
Made by Winsen, this air quality sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type CO2 Sensor; model no. / name MH Z19E; detection gas CO2. Check that your power source supplies 5.0±0.1V DC before connecting it.
Key Highlights
- Item Type: CO2 Sensor
- Model No. / Name: MH Z19E
- Detection Gas: CO2
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | CO2 Sensor |
|---|---|
| Model No. / Name | MH Z19E |
| Detection Gas | CO2 |
| Operating Voltage | 5.0±0.1V DC |
| Avg. Current Consumption | < 40mA (@5V power supply) |
| Peak Current (mA) | 125mA (@5V power supply) |
| Interface Type | 3.3 V (Compatible with 5V) |
| Detecting Range | 400~10000ppm(optional, see table2.) |
| Signal Output | Serial Port (UART) (TTL level 3.3V), PWM |
| Preheat time | 1 min |
| Response Time(s) | T90 < 120 s |
| Operating Temperature (°C) | -10 ~ 50 ℃ |
| Operating humidity | 0 ~ 95% RH (No condensation) |
| Storage Temperature (°C) | -20~60 ℃ |
| Weight (g) | 5 g |
| Life Cycle | > 10 years |
| Shipping Weight | 0.007 kg |
| Shipping Dimensions | 9 × 5 × 2 cm |
Overview
The Winsen MH-Z19E NDIR CO2 sensor for indoor air quality monitoring, made by Winsen, is listed in our air quality sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: CO2 Sensor
- Model No. / Name: MH Z19E
- Detection Gas: CO2
- Operating Voltage: 5.0±0.1V DC (match this to your power supply; too high a voltage can damage the part)
- Avg. Current Consumption: < 40mA (@5V power supply) (your supply must deliver at least this much current)
- Peak Current (mA): 125mA (@5V power supply) (your supply must deliver at least this much current)
- Interface Type: 3.3 V (Compatible with 5V) (confirm your cable or board uses the same connector)
- Detecting Range: 400~10000ppm(optional, see table2.) (quoted range is usually line-of-sight; walls and interference shorten it)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
- HVAC refrigeration
- Air cleaner device
- Indoor air quality monitoring
- Smart home
- Ventilation system
- School
Features:
- High sensitivity, low power consumption
- Good stability
- Temperature compensation, excellent linear output
- Multiple output modes: UART, PWM
- Long lifespan
- Anti-water vapor interference, anti-poisoning
Package Includes:
1 x Winsen MH-Z19E NDIR CO2 sensor for indoor air quality monitoringQuick specs
- Item Type
- CO2 Sensor
- Model No. / Name
- MH Z19E
- Detection Gas
- CO2
- Operating Voltage
- 5.0±0.1V DC
- Avg. Current Consumption
- < 40mA (@5V power supply)
- Peak Current (mA)
- 125mA (@5V power supply)


















