
1 / 2 · Click to enlarge
At a glance
Made by Winsen, this air quality sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Air Quality Sensor; model no. / name ZP07 MP503; interface Physical XH2.54-4P terminal sockets. Check that your power source supplies 5.0±0.2V DC (No voltage reverse connect protection) before connecting it.
Key Highlights
- Item Type: Air Quality Sensor
- Model No. / Name: ZP07 MP503
- Interface: Physical XH2.54-4P terminal sockets
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Air Quality Sensor |
|---|---|
| Model No. / Name | ZP07 MP503 |
| Interface | Physical XH2.54-4P terminal sockets |
| Detection Gas | Formaldehyde, Benzene, Carbon Monoxide, Hydrogen, Alcohol, Ammonia |
| Operating Voltage | 5.0±0.2V DC (No voltage reverse connect protection) |
| Output | TTL level (200ohm protected resistance inside) |
| Operating Temperature (°C) | 0~50℃ |
| Operating humidity | ≤95%RH |
| Working Current (mA) | ≤60mA |
| Length (mm) | 24 |
| Width (mm) | 20 |
| Weight (g) | 20 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 2 × 2 × 2 cm |
Overview
The Winsen ZP07-MP503 Air Quality Detection Module, made by Winsen, is listed in our air quality sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Air Quality Sensor
- Model No. / Name: ZP07 MP503
- Interface: Physical XH2.54-4P terminal sockets (confirm your cable or board uses the same connector)
- Detection Gas: Formaldehyde, Benzene, Carbon Monoxide, Hydrogen, Alcohol, Ammonia
- Operating Voltage: 5.0±0.2V DC (No voltage reverse connect protection) (match this to your power supply; too high a voltage can damage the part)
- Output: TTL level (200ohm protected resistance inside)
- Operating Temperature (°C): 0~50℃
- Operating humidity: ≤95%RH
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Winsen Air Quality Detection Module is an original and brand new ZP07 air-quality module that adopts a flat surface semiconductor gas sensor. The module has good sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol, and smoke of cigarette, essence &, etc. The module has been aging, debugged, adjusted, and calibrated. So it has a good consistency and high sensitivity.
Applications:
Air cleaner, fresh-air system, intelligent integrated ceiling, air quality detector, ventilator, air-condition.Features:
- High sensitivity to volatile organic gases
- Low power consumption
- 10 seconds to 3 minutes with auto-preheating function
- High cost-effective
Package Includes:
1 x Winsen Air Quality Detection Module
Quick specs
- Item Type
- Air Quality Sensor
- Model No. / Name
- ZP07 MP503
- Interface
- Physical XH2.54-4P terminal sockets
- Detection Gas
- Formaldehyde, Benzene, Carbon Monoxide, Hydrogen, Alcohol, Ammonia
- Operating Voltage
- 5.0±0.2V DC (No voltage reverse connect protection)
- Output
- TTL level (200ohm protected resistance inside)


















