
1 / 2 · Click to enlarge
At a glance
Made by WiT, this vibration sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name WTVB01 485 Vibration sensor; current consumption <25; communication interface 9600bps.
Key Highlights
- Adjustable settings
- Model No. / Name: WTVB01 485 Vibration sensor
- Current consumption: <25
- Communication Interface: 9600bps
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | WTVB01 485 Vibration sensor |
|---|---|
| Current consumption | <25 |
| Baud Rate (bps) | 4800 ~ 230400 |
| Communication Interface | 9600bps |
| Working Current (mA) | 12 |
| Accuracy | <FS±5% |
| Operating Temperature (°C) | -40 -+85 |
| Length (mm) | 55 |
| Width (mm) | 36.8 |
| Weight (g) | 133 |
| Shipping Weight | 0.328 kg |
| Shipping Dimensions | 11 × 11 × 6 cm |
Overview
The WIT WTVB01-485 RS485 Vibration Sensor Adjustable Baud 4800–230400bps, made by WiT, is listed in our vibration sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: WTVB01 485 Vibration sensor
- Current consumption: <25 (your supply must deliver at least this much current)
- Baud Rate (bps): 4800 ~ 230400
- Communication Interface: 9600bps (confirm your cable or board uses the same connector)
- Working Current (mA): 12 (your supply must deliver at least this much current)
- Accuracy: <FS±5%
- Operating Temperature (°C): -40 -+85
- Length (mm): 55 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- The module has its own voltage stabilization circuit, the working voltage is 5V~36V, and the connection is convenient.
- . The use of advanced digital filtering technology can effectively reduce measurement noise and improve measurement accuracy.
- At the same time, we provide users with various host computers, instructions for use, and development manuals, so as to minimize the R&D time for various needs.
- Support 485 interface. It is convenient for users to choose the best connection method. The serial port rate is adjustable from 4800bps to 230400bps, the cutoff frequency is adjustable from 0 to 100Hz, and the detection cycle is adjustable from 1 to 100Hz.
- Application areas: It can be widely used in bearing vibration measurement and real-time monitoring of rotating machinery such as submersible pumps, fans, steam turbines, coal mills, oxygen generators, generators, centrifuges, compressors, water pumps, motors, etc.
- The three-axis displacement, three-axis speed, three-axis angle, and three-axis frequency outputs satisfy users' all-round measurement of vibration and impact, and determine whether the measured object (motor pump) is damaged. If there is a machine failure caused by bearing wear, bearing cracking, poor dynamic balance, and misalignment, the vibration sensor can detect the failure in advance and issue an early warning to prevent the machine from continuing to work under bad conditions and causing damage, thereby causing economic losses.
- Multiple installation methods: magnetic connection, threaded connection. Firm and stable, easy to install and disassemble.
Useful Link:
https://www.wit-motion.com/proztsz/28.htmlApplication:
Widely used for bearing vibration measurement and real-time monitoring of rotating machinery such as:- Water Pumps
- Electric Motors
- Fans
- Steam Turbine Units
- Coal Mills
- Oxygen Generators
- Generators
- Centrifuges
- Compressors
- YAR Machinery
Package Includes:
1 x WiT WTVB01-485 Vibration Sensor
1 x Magnetic Attachment
Quick specs
- Model No. / Name
- WTVB01 485 Vibration sensor
- Current consumption
- <25
- Baud Rate (bps)
- 4800 ~ 230400
- Communication Interface
- 9600bps
- Working Current (mA)
- 12
- Accuracy
- <FS±5%



















