
1 / 3 · Click to enlarge
AI Summary
An 8-channel analog input HAT for Raspberry Pi 4 and CM4 with selectable 12/16-bit ADC resolution and voltage or current inputs. Pluggable terminal blocks and over-voltage protection make sensor wiring straightforward.
Key Highlights
- Eight analog input channels for Raspberry Pi 4 and CM4
- Selectable 12-bit or 16-bit ADC resolution
- Accepts 0-5V, 0-10V, 0-20mA and 4-20mA signals
- Single-ended and differential input configurations
- Programmable sample rate from 8 to 860 SPS
- Over-voltage protection and pluggable terminal blocks
Ideal For
- Industrial automation engineers building sensor monitoring nodes
- Raspberry Pi developers adding analog data acquisition
- Environmental monitoring teams using voltage or current transmitters
- Makers working with 4-20mA process instrumentation
- Embedded systems integrators needing a compact analog front end
Buying Tip
Confirm your sensors output 0-5V, 0-10V, 0-20mA or 4-20mA and plan a separate 12V/24V DC supply before wiring the HAT.
Elecvora expert review
Our verdict
The WIN-PIHAT-8AI covers a useful middle ground for Raspberry Pi users who need real analog capture without designing their own front end. Its mix of voltage and current inputs, selectable resolution, and protected terminal blocks makes it a sensible choice for monitoring and control work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Eight channels with both voltage and current input support
- Selectable 12-bit or 16-bit ADC resolution
- Single-ended and differential wiring options
- Pluggable terminal blocks and over-voltage protection
Cons
- Requires a separate 12V/24V DC supply
- Limited to Raspberry Pi 4 and CM4 hosts
- Operating range capped at 0°C to 60°C
Best for
Engineers and makers adding analog sensor acquisition to a Raspberry Pi 4 or CM4
Not ideal for
Projects needing more than eight analog channels or hosts other than Pi 4 and CM4
Specifications
| Shipping Weight | 1.2 kg |
|---|---|
| Shipping Dimensions | 15 × 10 × 4 cm |
What's in the box
- 1 x WIN-PIHAT-8AI 8-Channel Analog Input PiHAT for Raspberry Pi 4 & CM4
Frequently Asked Questions
Which Raspberry Pi boards does this HAT work with?
What signal types can the inputs accept?
How is the board powered?
Can I choose between 12-bit and 16-bit resolution?
Does it support differential inputs?
What is included with the product?
Overview
The Wittelb WIN-PIHAT-8AI is an analog input expansion board for Raspberry Pi 4 and CM4 platforms. It adds eight measurement channels to the host computer, letting the Pi read real-world sensors and transmitters rather than only digital signals. Voltage and current inputs are both supported, so the same board can work with 0-5V or 0-10V sensors as well as 0-20mA and 4-20mA current loops.
The board is built for embedded sensing and industrial measurement work. Inputs can be wired as single-ended or differential, and the ADC resolution can be set to 12-bit or 16-bit depending on the balance of speed and precision your project needs.
Key Features
- Eight analog channels: enough inputs for multi-sensor monitoring on a single HAT.
- Flexible input types: voltage ranges of 0-5V DC and 0-10V DC, plus 0-20mA and 4-20mA current ranges.
- Selectable resolution: choose 12-bit or 16-bit ADC output.
- Single-ended or differential wiring: adapts to different signal quality requirements.
- Programmable sampling: rates from 8 SPS to 860 SPS.
- Field-friendly connections: 2.54mm terminal blocks and a 40-pin GPIO header.
- Input protection: over-voltage protection on the analog front end.
Specifications Explained
ADC resolution determines how finely an input voltage is digitised. 16-bit mode gives finer steps for small signal changes, while 12-bit mode is lighter on data throughput.
Input impedance matters for sensor matching. Voltage inputs present at least 1MΩ, and current inputs use a 250Ω sense resistor, which is typical for loop-powered transmitters.
Accuracy is stated as ±0.1% to ±0.3% of full-scale range, so measurement error stays small relative to the selected range.
Power is supplied through a 12V/24V DC input, separate from the Pi's own supply. The board is rated for 0°C to 60°C operation and storage from -20°C to 70°C at 5% to 95% RH non-condensing.
Compatibility and Requirements
The HAT is designed for Raspberry Pi 4 and CM4 boards and connects through the 40-pin GPIO header. A 12V/24V DC supply is required for the board's power input. The board measures 56mm × 85mm, and the shipping package is listed at 1.2 kg with dimensions of 15 × 10 × 4 cm.
Typical Uses
- Industrial data acquisition and process monitoring
- Environmental sensing with analog transmitters
- Embedded measurement and control projects
- Current-loop instrumentation with 4-20mA devices
What's in the Box
1 x WIN-PIHAT-8AI 8-Channel Analog Input PiHAT for Raspberry Pi 4 and CM4.

















