
1 / 3 · Click to enlarge
AI Summary
An 8-channel MOSFET digital output HAT for Raspberry Pi 4 and CM4 that switches 12–24V DC loads up to 2A per channel. High-side solid-state outputs with under 100 µs response protect your GPIO while eliminating mechanical wear.
Key Highlights
- 8 independent MOSFET-based digital outputs, expandable from 1 to 8 channels
- P-channel high-side switching for reliable 12–24V DC load control
- Up to 2A continuous per channel with integrated flyback diode
- Ultra-fast switching time under 100 microseconds
- Electrical isolation and load buffering protect Raspberry Pi GPIO
- Compact 56 × 85 mm board with pluggable terminal blocks
Ideal For
- Raspberry Pi 4 and CM4 users building automation controllers
- Industrial control panel integrators needing 12–24V DC switching
- Smart home and IoT developers controlling valves, relays, or lamps
- Embedded systems engineers prototyping multi-channel outputs
- Makers upgrading from mechanical relays to solid-state switching
Buying Tip
Confirm that your load voltage is within 12–24V DC and that each channel's continuous current stays at or below 2A; for inductive loads, verify the flyback diode is suitable for your application.
Elecvora expert review
Our verdict
The Wittelb WIN-PIHAT-8DO-MOSFET offers a clean, solid-state way to add eight protected high-side outputs to a Raspberry Pi 4 or CM4. Its fast switching and expandable design make it a practical choice for automation and industrial control projects that need reliable 12–24V DC load switching.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Eight channels with expandability from one to eight outputs
- High-side MOSFET switching with under 100 µs response
- Integrated flyback diode and isolation protect the Pi
- Pluggable terminal blocks simplify wiring
- Compact 56 × 85 mm board fits tight spaces
Cons
- Requires a separate 12–24V DC supply for the loads
- Maximum 2A continuous per channel may limit high-power devices
- No onboard voltage regulation for the load supply
Best for
Raspberry Pi 4 and CM4 users needing fast, reliable 12–24V DC switching for automation or industrial control.
Not ideal for
Projects that need to switch AC mains loads or require more than 2A per channel.
Specifications
| Shipping Weight | 1.3 kg |
|---|---|
| Shipping Dimensions | 15 × 10 × 4 cm |
What's in the box
- 1 x WIN-PIHAT-8DO-MOSFET 8-Channel MOSFET Digital Output Raspberry Pi HAT
Frequently Asked Questions
Which Raspberry Pi models are supported?
What load voltage can I switch?
How much current can each channel handle?
Is the Raspberry Pi protected from the load voltage?
What is included in the package?
Can I use fewer than eight outputs?
Overview
The Wittelb WIN-PIHAT-8DO-MOSFET is a digital output expansion board designed for Raspberry Pi 4 and Compute Module 4. It provides eight high-side MOSFET outputs that let your Pi switch industrial-grade DC loads without exposing the GPIO to harmful voltages or currents. Each channel uses a P-channel MOSFET solid-state switch, so there are no moving contacts to wear out and no contact noise during operation.
Whether you are building a small automation rig or a larger control panel, the scalable architecture supports one to eight independent outputs. The board ships with a 40-pin GPIO header and 2-pin pluggable terminal blocks for each channel, simplifying field wiring and maintenance.
Key Features
- 8-channel output expansion: Control up to eight separate DC loads from a single HAT.
- High-side solid-state switching: P-channel MOSFET outputs deliver clean, fast load control.
- Fast response: Switching time is under 100 microseconds for time-sensitive tasks.
- GPIO protection: Electrical isolation and load buffering keep the Raspberry Pi safe.
- Integrated flyback diode: Helps manage inductive load transients.
- Compact industrial design: 56 × 85 mm board fits tight enclosures.
Specifications Explained
Output type and current: Each channel is a P-channel MOSFET high-side switch rated for 2A continuous. This means you can drive relays, solenoids, valves, or lamps that draw up to 2A at your chosen voltage. For loads with inrush current, check the peak demand against the 2A continuous rating.
Switching voltage: The board is designed for 12V–24V DC loads. Make sure your load voltage falls within this range and that your power supply can deliver the total current for all active channels.
Switching time: Under 100 microseconds, the outputs respond almost instantly, which suits applications requiring rapid cycling or precise timing.
On resistance: Below 100 Ω, the MOSFET channel keeps voltage drop low and reduces heat generation at the rated current.
Mechanical life: Because the outputs are solid-state, mechanical life is virtually unlimited—no contacts to pit or stick.
Compatibility and Requirements
The HAT is compatible with Raspberry Pi 4 and Compute Module 4. It connects via the 40-pin GPIO header. You will need a separate 12V–24V DC power supply for the loads you intend to switch; the HAT itself is powered from the Raspberry Pi. Ensure your wiring and connectors are rated for the current you plan to draw.
Typical Uses
This board is well suited to embedded control systems, smart automation projects, and industrial switching applications. Use it to control solenoid valves, relays, DC motors (with appropriate suppression), indicator lamps, or other 12–24V DC devices from your Raspberry Pi. The fast switching and solid-state design make it a good fit for repetitive cycling tasks and noise-sensitive environments.
What's in the Box
Package includes: 1 x WIN-PIHAT-8DO-MOSFET 8-Channel MOSFET Digital Output Raspberry Pi HAT.

















