Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 12-24V DC temperature and humidity sensor board that outputs analog signals, including a 4-20mA current loop, across a -40°C to 85°C range. Its analog output makes it easy to wire into PLCs, meters and data loggers without protocol setup.

Key Highlights

  • Measures temperature and humidity from a single sensor board
  • 4-20mA analog current output for long-cable signal transmission
  • Wide -40°C to 85°C measurement range for demanding environments
  • 12-24V DC powered for direct use with industrial supplies
  • Compact 85 x 85 mm board format for panel and enclosure mounting
  • Analog output removes the need for digital protocol configuration

Ideal For

  • Control and automation integrators wiring sensors into PLC analog inputs
  • Facilities technicians monitoring cabinets and equipment rooms
  • Greenhouse and grow-room operators tracking climate conditions
  • Makers and students building wired environmental monitoring projects
  • Maintenance teams needing a compact panel-mount sensor

Buying Tip

Confirm your receiving device accepts a 4-20mA or analog voltage input and that a 12-24V DC supply is available at the mounting location before ordering.

Elecvora expert review

Our verdict

A practical choice when you need temperature and humidity data in analog form rather than over a digital bus. The 4-20mA output and wide voltage input make it easy to drop into existing control panels.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 4-20mA current output suits longer cable runs
  • Wide -40°C to 85°C measurement range
  • Accepts a broad 12-24V DC supply
  • Compact 85 x 85 mm board for panel mounting
  • No protocol or driver setup at the receiving end

Cons

  • Requires a separate 12-24V DC power source
  • Analog scaling must be configured on the receiving device
  • Wire outlet may be single or multiple, so check on arrival

Best for

Panel and enclosure monitoring where an analog signal feeds a PLC or meter

Not ideal for

Plug-and-play USB or wireless logging without additional hardware

Specifications

Item TypeTemperature and humidity sensor
Model No. / NameTemperature Sensor, Humidity Sensor
Rated Voltage (VDC)12-24
Operating Current (A)1
Temperature measurement-40°C ~ 85°C
Length (mm)85
Width (mm)85
Measuring Temperature (°C)-40°C ~ 85
Shipping Weight0.257 kg
Shipping Dimensions19 × 14 × 8 cm

What's in the box

  • 1 x WIN-SN-TnH-AHT20-AO-C Digital Temperature and Humidity Sensor

Frequently Asked Questions

What output does this sensor provide?
It provides analog output, including a 4-20mA current signal, with 10-bit and 12-bit resolution options. Voltage-level output is also available according to the product data.
What power supply does it need?
The board is rated for 12-24V DC with an operating current of 1A. Use a supply within that voltage range and confirm adequate current capacity.
What temperature range can it measure?
It measures from -40°C to 85°C, which covers cold storage, outdoor enclosures and warm equipment cabinets.
Can I connect it directly to a PLC?
Yes, provided your PLC analog input module accepts a 4-20mA current signal or the matching voltage output. You will need to scale the reading in the PLC.
What is included in the package?
The package contains one WIN-SN-TnH-AHT20-AO-C digital temperature and humidity sensor. Power supply and signal cables are not listed as included.
How should I care for the sensor?
Mount it where the sensing area has airflow and is protected from direct water ingress, and keep the supply within the rated 12-24V DC range. Check wiring connections periodically for corrosion or looseness.

Overview

The WittelB WIN-SN-TnH-AHT20-AO-C is a digital temperature and humidity sensor board designed around analog output. Instead of a serial bus, it delivers measurement data as analog signals, including a 4-20mA current loop, so receiving equipment such as PLCs, panel meters and data loggers can read conditions with minimal configuration.

The board accepts a 12-24V DC supply and measures temperature across -40°C to 85°C. Its 85 x 85 mm format fits control cabinets, equipment housings and monitoring panels where a compact, wired sensor is preferred.

Key Features

  • Dual measurement: temperature and humidity from one board
  • Analog output: 4-20mA current signal plus voltage-level output
  • Resolution options: 10-bit and 12-bit analog output modes
  • Wide temperature range: -40°C to 85°C measurement span
  • Flexible power: 12-24V DC rated input
  • Low operating current: rated at 1A for straightforward supply planning

Specifications Explained

Temperature range

A -40°C to 85°C span covers cold storage, outdoor enclosures and warm equipment cabinets, so the same sensor can serve across a site rather than being limited to indoor comfort monitoring.

Analog output and resolution

The 4-20mA current loop is the practical choice for longer cable runs, because current signals resist voltage drop better than voltage outputs. Selectable 10-bit and 12-bit resolution lets you balance signal granularity against the reading resolution of your receiving device.

Power supply

The 12-24V DC rating matches common industrial and control-panel supplies. Confirm your supply voltage and available current before wiring, and check that the receiving input matches the output type you plan to use.

Board dimensions

At 85 x 85 mm, the board suits flat mounting inside enclosures where space is limited but accessible.

Compatibility and Requirements

The sensor needs a 12-24V DC power source and a receiving device that accepts an analog current or voltage input, such as a PLC analog module, panel meter or data logger. Because the interface is analog, no driver or protocol setup is needed at the receiving end. Plan your wiring for the output type you select and confirm the input range of your reading equipment beforehand.

Typical Uses

  • Greenhouse and grow-room climate monitoring
  • Outdoor air quality and weather station enclosures
  • Industrial cabinet and equipment room monitoring
  • Smart building and environmental monitoring panels
  • Educational and prototyping projects needing a wired sensor

What's in the Box

1 x WIN-SN-TnH-AHT20-AO-C digital temperature and humidity sensor.

Quick specs

Item Type
Temperature and humidity sensor
Model No. / Name
Temperature Sensor, Humidity Sensor
Rated Voltage (VDC)
12-24
Operating Current (A)
1
Temperature measurement
-40°C ~ 85°C
Length (mm)
85
See all specifications