
1 / 3 · Click to enlarge
AI Summary
A Modbus RS485 temperature and humidity sensor using AHT20 sensing, with a real-time 7-segment display for on-site readings. It runs on 12-24V DC and covers -40 to 85°C and 0-80% RH.
Key Highlights
- AHT20 sensing element for stable temperature and humidity readings
- Modbus RTU over RS485 for PLC, controller and IoT integration
- Onboard 7-segment display shows live values on site
- Wide -40 to 85°C temperature range for demanding environments
- 0 to 80% RH humidity measurement span
- 12-24V DC input at approximately 1A operating current
Ideal For
- HVAC technicians monitoring room and duct conditions
- Industrial automation engineers adding Modbus sensor nodes
- IoT developers building RS485-based environmental monitoring
- Facilities teams checking climate in plant rooms and enclosures
- Makers and integrators needing a display-equipped sensor
Buying Tip
Confirm your controller or gateway supports Modbus RTU over RS485 and can supply 12-24V DC at around 1A before ordering.
Elecvora expert review
Our verdict
A practical sensor for anyone already working in Modbus RS485 environments, since the display removes the guesswork during setup. The AHT20 element and wide temperature span make it a sensible general-purpose monitoring node.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Modbus RTU over RS485 integrates with common industrial controllers
- Onboard 7-segment display for quick on-site verification
- Wide -40 to 85°C operating temperature range
- Configurable baud rate, slave ID and communication speed
- Wide 12-24V DC input suits shared panel supplies
Cons
- Humidity range stops at 80% RH, so condensing environments are unsuitable
- Requires an external 12-24V DC supply and RS485 master, neither included
- No enclosure or IP rating is stated in the available data
Best for
Modbus-based HVAC and industrial environmental monitoring
Not ideal for
High-humidity or condensing environments above 80% RH
Specifications
| Rated Voltage (VDC) | 12-24 |
|---|---|
| Operating Temperature (°C) | -40 to 85 |
| Humidity Range | 0% to 80% RH |
| Operating Current (A) | 1 |
| Shipping Weight | 0.268 kg |
| Shipping Dimensions | 19 × 13.5 × 8.5 cm |
What's in the box
- 1 x Digital Temperature and Humidity Sensor with Modbus RS485 and Display
Frequently Asked Questions
What protocol does this sensor use?
What voltage does it need?
Can I read values without connecting it to a controller?
What temperature and humidity range does it cover?
How do I change the address or baud rate?
What is included with the sensor?
Overview
The WittelB WIN-SN-TNH-AHT20-M is a digital temperature and humidity sensor that combines AHT20 sensing technology with Modbus RTU communication over RS485 and a real-time 7-segment display. Rather than a bare probe that needs a separate meter, it is a self-contained monitoring unit: it measures, communicates and displays at the same time.
It is aimed at people who need environmental data inside an existing control system. Because it speaks Modbus RTU over RS485, readings can be pulled into PLCs, building controllers, data loggers and IoT gateways, while the display gives a quick visual check during commissioning or routine inspection.
Key Features
- AHT20 sensing: a stable digital sensing element for temperature and humidity acquisition.
- Modbus RTU (RS485): a standard industrial serial protocol for straightforward integration.
- 7-segment display: shows current readings directly on the device.
- Wide operating range: -40 to 85°C and 0 to 80% RH.
- Flexible power: accepts 12-24V DC at roughly 1A.
- Configurable settings: baud rate, slave ID and communication speed can be adjusted, with a reset function to restore defaults.
Specifications Explained
Temperature range: -40 to 85°C
This span covers cold storage, outdoor enclosures and warm plant rooms alike, so the same unit can be reused across varied sites without swapping sensors.
Humidity range: 0 to 80% RH
The sensor is intended for general environmental monitoring up to 80% relative humidity. Applications that sit consistently near saturation are outside its stated span.
Power: 12-24V DC, 1A
A wide DC input means it can share a supply with other 12V or 24V equipment on the panel. Plan for a supply capable of the stated 1A operating current.
Modbus RTU over RS485
RS485 is a differential serial bus suited to longer cable runs in industrial settings. Modbus RTU is widely supported, so the sensor can be addressed as a slave device on a multi-drop network.
Compatibility and Requirements
The sensor requires a 12-24V DC power source and an RS485 master or gateway that supports Modbus RTU. Configuration of baud rate, slave ID and communication speed is done through the device settings, and a reset function returns it to defaults if a configuration error occurs. No other accessories are stated as included.
Typical Uses
- HVAC and building climate monitoring
- Industrial automation and PLC-based data acquisition
- Environmental assessment and air quality projects
- IoT and remote monitoring installations
- Indoor and outdoor enclosures within the stated range
What's in the Box
1 x Digital Temperature and Humidity Sensor with Modbus RS485 and Display.
Quick specs
- Rated Voltage (VDC)
- 12-24
- Operating Temperature (°C)
- -40 to 85
- Humidity Range
- 0% to 80% RH
- Operating Current (A)
- 1
- Shipping Weight
- 0.268 kg
- Shipping Dimensions
- 19 × 13.5 × 8.5 cm













