Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WOER, this 1 mm to 4 mm is a good fit for workshops and professional users. Main specs: diameter (mm) 1; color Red; roll length - metric 200m.

Key Highlights

  • Diameter (mm): 1
  • Color: Red
  • Roll Length - Metric: 200m

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Diameter (mm)1
ColorRed
Roll Length - Metric200m
Shrink Ratio0.084027778
Operating Temperature (°C)55 - 125
Ultimate Tensile StrengthASTM D 2671-≥1 0. 4
Dielectric StrengthASTM D 1 49 - 15kV/mm
Heat ShockNo Cracking
Additional Specs.Concentricity:≥65%, Cold Bend: No Cracking, Corrosion of Bare Copper: No Corrosion
Shipping Weight0.3 kg
Shipping Dimensions20 × 15 × 15 cm

Overview

The Heat Shrink Sleeve 1mm Red Industrial Grade WOER (HST), made by WOER, is listed in our 1 mm to 4 mm range and suits workshops and professional users. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Diameter (mm): 1
  • Color: Red
  • Roll Length - Metric: 200m (measure your mounting space before ordering)
  • Shrink Ratio: 0.084027778
  • Operating Temperature (°C): 55 - 125
  • Ultimate Tensile Strength: ASTM D 2671-≥1 0. 4
  • Dielectric Strength: ASTM D 1 49 - 15kV/mm
  • Heat Shock: No Cracking

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

As this Shrink Sleeve comes in standard roll packaging of 200 meters, we suggest to buy in multiples of “200m” to get a complete roll package. Less than “200m” will be shipped in cut pieces of ordered Length. ( 1 Qty = 1 Meter ) Note : 1 Qty = 1 Meter. The standard roll length is 200 meters. Shrink sleeve length will be continuous as per your ordered Qty.

The 1mm Red Industrial Grade WOER Heat Shrink Sleeve (HST) is an ultra-narrow insulation and wire-protection solution engineered for micro-electronics, precision robotics, aerospace wiring, and delicate sensor connections. Featuring a 2:1 shrink ratio, this thin-wall micro-tubing transitions seamlessly from an internal diameter of 1.0mm down to a microscopic 0.5mm upon heat application.

Its vivid red color is the global industry standard for indicating positive DC polarity, primary power lines, or active phases in low-voltage micro-arrays. Highly flame-retardant (VW-1 rated) and resilient against fluids, this sleeve offers permanent, commercial-grade protection for fine-gauge wires (like 26–30 AWG), headphone cables, and sensitive solder joints.


Features :

  1. Genuine WOER Micro-Industrial Quality
  2. High-Performance Flame Retardancy (VW-1)
  3. Broad Temperature Envelope (-55°C to 125°C)
  4. Precision 600V Insulation
  5. High Dielectric Safety

Package Includes:

1 x Heat Shrink Sleeve 1mm Red Industrial Grade WOER (HST)

Quick specs

Diameter (mm)
1
Color
Red
Roll Length - Metric
200m
Shrink Ratio
0.084027778
Operating Temperature (°C)
55 - 125
Ultimate Tensile Strength
ASTM D 2671-≥1 0. 4
See all specifications