Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact FT232RL USB-to-serial adapter board with a 20-pin 2.0mm BEE socket for XBee-compatible modules. It lets you configure and test modules from a PC over the included 30cm mini USB cable.

Key Highlights

  • FT232RL USB-to-serial chip for reliable PC communication
  • 20-pin 2.0mm BEE socket for XBee-compatible modules
  • Supports UART, Bit Bang I/O and SPI protocols
  • 3.3V and 5V IO compatible for flexible board pairing
  • USB 2.0 protocol with mini-B connection
  • Compact 42x26x6mm board with 30cm cable included

Ideal For

  • Makers configuring XBee and Zigbee modules
  • Arduino users programming boards without USB
  • Bench testers working with wireless serial links
  • Students learning module setup and diagnostics
  • Hobbyists building point-to-point radio projects

Buying Tip

Check that your module uses a 20-pin, 2.0mm pitch BEE socket before ordering, since this adapter is built around that specific spacing.

Elecvora expert review

Our verdict

A straightforward, affordable adapter that does one job well: getting a PC talking to XBee-compatible modules and Arduino boards without USB. The included cable and compact board make it a sensible bench accessory.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • FT232RL chip is a well-known, dependable USB-serial bridge
  • Supports both 3.3V and 5V logic
  • Compact board with mounting holes
  • Cable included, so no extra purchase needed

Cons

  • Uses a mini USB connector rather than the more common micro USB
  • Only suits modules with 2.0mm pitch BEE sockets

Best for

Bench configuration and testing of XBee-compatible modules

Not ideal for

Permanent installation in a finished enclosure

Specifications

Model No. / NameXBee USB Adapter
USB Interface (Y/N)Mini-B (2.54mm pitch pin header)
Communication ProtocolUART, Bit Bang I/O, SPI
Cable Length30
Board Dimensions42x26x6
Shipping Weight0.06 kg
Shipping Dimensions8 × 4 × 4 cm

What's in the box

  • 1 x XBee USB Adapter FT232RL board
  • 1 x Mini USB cable, 30cm

Frequently Asked Questions

What is this adapter used for?
It connects a PC to XBee-compatible modules and to Arduino boards that lack a USB port, allowing configuration, programming and serial communication.
Which modules fit the socket?
Modules with a 20-pin, 2.0mm pitch BEE connector. Check your module's pin spacing before use, as 0.1-inch headers will not fit directly.
Does it work with both 3.3V and 5V boards?
Yes, the board is listed as 3.3V and 5V IO compatible, so it can be used with either logic level.
Is a cable included?
Yes, a 30cm mini USB cable is supplied with the adapter board.
Can I use it to program an Arduino Pro Mini?
Yes, it can serve as a downloader for Arduino boards such as the Pro Mini, provided you wire the serial lines correctly.
What software can I use for XBee setup?
X-CTU is supported for XBee module configuration, and general serial terminal software can also be used for testing.

Overview

The XBee USB Adapter FT232RL is a small interface board that connects a computer to XBee-compatible wireless modules and to Arduino boards that lack a native USB port. At its centre is the FT232RL USB-to-serial IC, which handles the conversion between USB and serial data. A 20-pin, 2.0mm pitch BEE socket accepts compatible modules, while the mini-B USB connector links the board to your PC using the supplied 30cm cable.

The board measures 42 x 26 x 6mm, so it takes up very little bench space and is easy to carry in a tool kit. It is intended for setup, configuration and testing work rather than permanent installation.

Key Features

  • FT232RL bridge chip: provides USB-to-serial communication for programming and data transfer.
  • BEE socket: 20-pin, 2.0mm pitch female header for XBee-compatible modules.
  • Multiple protocols: supports UART, Bit Bang I/O and SPI.
  • Voltage flexibility: 3.3V and 5V IO compatible.
  • USB 2.0: standard mini-B connection with a 30cm cable included.
  • Bench-friendly design: compact footprint with mounting holes and easy-to-solder connections.

Specifications Explained

The FT232RL is the core of the board. It converts USB signals into serial data your module or board can understand, which is what makes programming and configuration possible from a normal PC.

The 2.0mm pitch BEE socket matches the pin spacing used by XBee modules. Because that spacing differs from the 0.1-inch spacing on most breadboards, this adapter board acts as a convenient bridge between the two.

UART, Bit Bang I/O and SPI support covers the common ways these modules exchange data, so the same board can be used for serial communication as well as lower-level I/O tasks. 3.3V and 5V IO compatibility means the board can sit between logic levels used by different small boards without an extra level shifter.

Compatibility and Requirements

The adapter is designed for XBee-compatible modules with 2.0mm pin spacing and for Arduino boards that need a USB serial connection, such as the Pro Mini downloader use case. It also works for configuring Bluetooth Bee modules. A PC with a free USB port and a mini USB cable are required; the cable is included. Configuration software such as X-CTU is supported for XBee module setup.

Typical Uses

  • Configuring and testing XBee modules before deploying them in a point-to-point link.
  • Programming Arduino boards that have no onboard USB interface.
  • Setting up Bluetooth Bee modules for data transmission.
  • Connecting a PC directly to a wireless module over USB.
  • Bench testing and diagnostics for small radio projects.

What's in the Box

  • 1 x XBee USB Adapter FT232RL board
  • 1 x Mini USB cable, 30cm

Quick specs

Model No. / Name
XBee USB Adapter
USB Interface (Y/N)
Mini-B (2.54mm pitch pin header)
Communication Protocol
UART, Bit Bang I/O, SPI
Cable Length
30
Board Dimensions
42x26x6
Shipping Weight
0.06 kg
See all specifications