Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Digi XBee3 2.4GHz ZigBee 3.0 module with RP-SMA female connector delivers pre-certified wireless connectivity with MicroPython programmability and TrustFence security. Its compact micro form factor and external antenna option make it ideal for space-constrained IoT designs.

Key Highlights

  • 2.4 GHz ZigBee 3.0 module with RP-SMA female antenna connector
  • Silicon Labs EFR32MG SoC with 1 MB memory and 128 KB RAM
  • MicroPython programmability eliminates external microcontroller
  • Digi TrustFence security with 128/256-bit AES encryption
  • Rated outdoor range up to 4000 ft (1200 m)
  • Supports UART, SPI, and I2C interfaces

Ideal For

  • IoT product designers needing pre-certified ZigBee modules
  • OEMs adding wireless connectivity to building automation systems
  • Smart energy solution providers requiring secure mesh networking
  • Developers building compact sensor nodes with MicroPython
  • System integrators working on intelligent lighting projects

Buying Tip

Remember that an external antenna with RP-SMA male connector is required for operation and is not included.

Elecvora expert review

Our verdict

The Digi XBee3 2.4GHz ZigBee 3.0 module offers a robust, pre-certified solution for adding wireless connectivity with minimal development effort. Its MicroPython support and TrustFence security make it a strong choice for IoT edge devices.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-certified for faster time to market
  • MicroPython programmability reduces external components
  • Strong security with TrustFence and AES encryption
  • Flexible interfacing via UART, SPI, and I2C
  • Compact micro form factor

Cons

  • External antenna required (not included)
  • Requires separate development board for initial setup
  • Higher cost compared to basic ZigBee modules

Best for

IoT developers and OEMs needing a secure, programmable ZigBee module

Not ideal for

Hobbyists on a tight budget or those needing an integrated antenna

Specifications

Model No. / NameXbee 3
Frequency (GHz)2.4
Receive Current (mA)15
TRANSCEIVER CHIPSETSilicon Labs EFR32MG SoC
DIGI Xbee Part No.XB3-24Z8ST-J
Data Transfer RateRF 250 Kbps, Serial up to 1 Mbps
RATED INDOOR/URBAN RANGEUp to 200 ft (60 m)
RATED OUTDOORUp to 4000 ft (1200 m)
Receiver Sensitivity-103 dBm Normal Mode
Transmit Power (dBm)+8 dBm
Supply Voltage2.1 to 3.6V
Transmit Current (mA)40 mA @ 8 dBm 135 mA @ 19 dBm
POWER-DOWN CURRENT1.7 microAmp @ 25 degrees C
Memory Capacity1 MB / 128 KB RAM
Additional Specs.CPU/CLOCK SPEED: HCS08 / up to 50.33 MHz
ProtocolZigBee® 3.0
Encryption128/256 bit AES
RELIABLE PACKET DELIVERYRetries/Acknowledgements
Channels16 channel
IDSPAN ID and Addresses, cluster IDs and endpoints (optional)
Shipping Weight0.06 kg
Shipping Dimensions8 × 5 × 3 cm

What's in the box

  • 1 x Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna connector module

Frequently Asked Questions

What antenna does this module require?
It requires an external antenna with an RP-SMA male connector, which is not included.
Can I program the module directly?
Yes, the module supports MicroPython, allowing you to run custom code without an external microcontroller.
What is the power supply range?
The module operates from 2.1V to 3.6V DC.
Is the module pre-certified?
Yes, Digi XBee3 modules are pre-certified, which helps accelerate regulatory approval for your product.
What is included in the package?
The package includes one Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna connector module only.
What is the operating temperature range?
The module operates from -40°C to +85°C.

Overview

The Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna connector is a compact, pre-certified ZigBee 3.0 module that accelerates time to market for designers, OEMs, and solution providers. Built on the Silicon Labs EFR32MG SoC, it packs 1 MB of memory and 128 KB RAM into a micro form factor, enabling smart end nodes and low-end gateways without an external microcontroller. The RP-SMA female connector allows for external antenna integration, while Digi TrustFence provides layered security for IoT edge devices.

Key Features

  • ZigBee 3.0 protocol with 16 channels and 128/256-bit AES encryption for secure, reliable communication.
  • MicroPython programmability simplifies adding custom functionality and logic directly on the module.
  • Multiple interfaces: UART, SPI, and I2C for flexible integration with sensors and peripherals.
  • Configuration flexibility: API or AT commands, locally or over-the-air (OTA).
  • Reliable packet delivery with retries and acknowledgements.
  • Compact size of 13 mm x 19 mm for space-constrained applications.

Specifications Explained

The 2.4 GHz frequency band is standard for ZigBee, offering global compatibility. With a transmit power of +8 dBm and receiver sensitivity of -103 dBm, the module achieves a rated indoor/urban range up to 200 ft (60 m) and outdoor range up to 4000 ft (1200 m) line-of-sight. The supply voltage range of 2.1 to 3.6V accommodates common low-power designs, while current consumption is 15 mA receive and 40 mA transmit at 8 dBm, with a power-down current of just 1.7 microAmp at 25°C for battery-sensitive applications. The HCS08 CPU runs at up to 50.33 MHz, and the module supports RF data rates up to 250 Kbps and serial rates up to 1 Mbps.

Compatibility and Requirements

The module is pre-certified and configurable via Digi XCTU software. It requires a 2.1 to 3.6V power supply and a host system or development board for initial setup. The RP-SMA female connector requires a compatible external antenna (not included). Operating temperature range is -40°C to +85°C.

Typical Uses

Ideal for building automation, smart energy, digital health, intelligent lighting, and other IoT applications where reliable wireless mesh networking is needed. The module's small size and external antenna option make it suitable for retrofitting into existing products or creating new compact designs.

What's in the Box

1 x Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna connector module.

Quick specs

Model No. / Name
Xbee 3
Frequency (GHz)
2.4
Receive Current (mA)
15
TRANSCEIVER CHIPSET
Silicon Labs EFR32MG SoC
DIGI Xbee Part No.
XB3-24Z8ST-J
Data Transfer Rate
RF 250 Kbps, Serial up to 1 Mbps
See all specifications