
1 / 7 · Click to enlarge
AI Summary
A compact ATtiny85 development board that programs through the familiar Arduino IDE. It offers 6 I/O pins, 4 analog inputs and 3 PWM outputs in a board weighing just 4 g.
Key Highlights
- ATtiny85 microcontroller on a board measuring 26 x 18 mm
- Program with the familiar Arduino IDE on Windows, macOS or Linux
- Powered by USB or an external DC source with automatic selection
- On-board 150 mA 5 V regulator for stable logic supply
- 6 I/O pins configurable as digital, analog or PWM functions
- Includes power LED and test/status LEDs for quick checks
Ideal For
- Makers building compact sensor and control projects
- Students learning AVR and Arduino IDE programming
- Electronics hobbyists who need a tiny low-cost board
- Prototypers fitting electronics into small enclosures
- Anyone adding simple PWM or analog input control
Buying Tip
Check that your project fits within the ATtiny85's 8 KB flash (about 6 KB after the bootloader) and that you have the ATtiny core installed in the Arduino IDE before ordering.
Elecvora expert review
Our verdict
A practical, very small ATtiny85 board for anyone who wants Arduino-style development in a tiny package. It is best treated as a compact prototyping tool rather than a full-featured development board.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small 26 x 18 mm footprint and 4 g weight
- Works with the familiar Arduino IDE
- USB or external power with automatic selection
- On-board 5 V regulator and status LEDs
- Six I/O pins with analog and PWM options
Cons
- Only 8 KB flash, about 6 KB usable after the bootloader
- Two I/O pins are shared with USB communication
- No cables or power supply included
Best for
Compact ATtiny85 projects and Arduino IDE learning
Not ideal for
Projects needing large sketches or many I/O pins
Specifications
| Item Type | Development Board |
|---|---|
| Model No. / Name | ATTINY Series |
| Microcontroller | ATtiny85 |
| Length (mm) | 26 |
| Width (mm) | 18 |
| Weight (g) | 4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 4 × 3 × 1 cm |
What's in the box
- 1 x ATTINY85 USB Development Board
Frequently Asked Questions
What microcontroller does this board use?
Can I program it with the Arduino IDE?
How is the board powered?
How many input and output pins are available?
What is included in the package?
Does it support I2C and SPI?
Overview
The DIGI ATTINY85 USB Development Board puts an ATtiny85 microcontroller into a very small footprint: 26 mm long, 18 mm wide and roughly 4 g in weight. It is aimed at anyone who wants to move from a full-size development board to a compact, low-cost AVR platform without learning a completely new toolchain. Development uses the Arduino IDE, so the same editing, compiling and uploading workflow applies.
The board includes a built-in USB interface and an on-board 150 mA 5 V regulator. Power can come from a USB port or from an external DC supply, with automatic source selection, which makes the board convenient for both bench work and standalone installations.
Key Features
- ATtiny85 microcontroller with 8 KB flash memory, of which about 6 KB remains after the bootloader.
- Arduino IDE support for version 1.0 and later on OSX, Windows and Linux.
- Flexible I/O: 6 pins usable as digital I/O, 4 as analog inputs and 3 as PWM outputs, depending on programming.
- USB and external power with automatic selection, plus an on-board 150 mA 5 V regulator.
- Built-in USB and serial debugging support.
- I2C and SPI via the USI peripheral.
- Status feedback from the power LED and test/status LEDs.
Specifications Explained
The ATtiny85 is an 8-bit AVR microcontroller. Its 8 KB of flash holds your sketch, with approximately 6 KB free after the bootloader, so programs should stay compact. The six I/O pins are the main interface to the outside world. Two of them are shared with USB communication, so if your program actively communicates over USB, plan around the reduced pin count; otherwise all six remain available even when programming over USB.
Four pins can read analog voltages, which is useful for simple sensors. Three pins can produce hardware PWM, and software PWM can extend that number if timing allows. The USI peripheral provides I2C and SPI communication. The 150 mA 5 V regulator accepts an external supply and delivers a regulated rail, while the small 26 x 18 mm board size and 4 g weight suit space-constrained builds.
Compatibility and Requirements
The board is programmed through the Arduino IDE, version 1.0 or newer, on OSX, Windows or Linux. A USB connection is used for programming and can also power the board. An external DC source can be connected instead, and the board selects the power source automatically. Because the board is an ATtiny85 device rather than a standard Arduino board, you will need the appropriate ATtiny core support in the IDE before uploading sketches.
Typical Uses
Typical projects include small sensor nodes, LED effects, simple timers and switches, compact controller modules, and learning exercises in AVR programming. The combination of analog inputs, PWM outputs and serial communication covers many basic automation and electronics experiments.
What's in the Box
The package contains one ATTINY85 USB Development Board. No cables or external power supply are included.

Quick specs
- Item Type
- Development Board
- Model No. / Name
- ATTINY Series
- Microcontroller
- ATtiny85
- Length (mm)
- 26
- Width (mm)
- 18
- Weight (g)
- 4
Frequently Bought Together

Arduino Uno R3 with Cable
$9.99
Uno R3 Board without Cable compatible with Arduino
$9.99
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
$6.99
GL-12 840 Points Solderless Breadboard
$6.99
30pcs Flexible Breadboard Jumper Wires
$6.99
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
$7.99













