Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 12V temperature and humidity controller module with an integrated sensor, digital display and relay output rated up to 10A. It lets you set independent start and stop thresholds for temperature and humidity directly on the board.

Key Highlights

  • Dual temperature and humidity control from one compact board
  • 0.1°C and 0.1%RH resolution for precise threshold setting
  • Relay output handles loads up to 10A
  • Integrated sensor with 65 x 55 mm board footprint
  • Onboard display and buttons for threshold adjustment
  • 12V DC operation suits common project power supplies

Ideal For

  • Makers building automatic enclosure ventilation
  • Hobbyists setting up terrarium or propagation climate control
  • Technicians adding threshold switching to drying cabinets
  • Students and educators running climate experiments
  • DIY greenhouse builders needing humidity-triggered fans

Buying Tip

Confirm your load draws no more than 10A and that you have a stable 12V DC supply before wiring the relay output.

Elecvora expert review

Our verdict

The XH-M452 packs dual threshold control and a 10A relay into a small, affordable board. It is a practical choice for simple automatic climate switching where fine app control is not needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Independent start and stop settings for temperature and humidity
  • Relay rated up to 10A covers many common loads
  • Integrated sensor and display simplify installation
  • Compact 65 x 55 mm board fits tight spaces

Cons

  • Requires a separate 12V DC power supply
  • No app or remote monitoring; settings are onboard only
  • Load must stay within the 10A relay rating

Best for

DIY climate control in enclosures, cabinets and small grow spaces

Not ideal for

Users needing remote access or loads above 10A

Specifications

Voltage Rating12
Model No. / NameXH M452
Operating Temperature (°C)0% to 100%RH
Accuracy0.1°C, 0.1RH
Output TypeRelay output
Output Capacityup to 10A
Length (mm)65
Width (mm)55
Weight (g)69g (with sensor)
Shipping Weight0.01 kg
Shipping Dimensions7 × 6 × 3 cm

What's in the box

  • 1 x XH-M452 Temperature and Humidity Controller Module with sensor

Frequently Asked Questions

What power supply does the XH-M452 need?
The board requires a 12V DC supply. It does not include a power adapter, so you will need to provide one rated for your setup.
Can I control both heating and cooling with this module?
The module has a single relay output, so it switches one connected device based on your temperature and humidity thresholds. It is typically used for one function at a time.
What is the maximum load the relay can switch?
The relay output is rated up to 10A. Check the current draw of your fan, heater or humidifier to ensure it stays within this limit.
Is the sensor included?
Yes, the package includes the XH-M452 module with its integrated sensor.
How do I reset the module to factory settings?
Long-press the temperature and humidity + keys simultaneously for 3 seconds. The display will show 888 888 to indicate the reset.
What are the temperature and humidity measurement ranges?
The temperature measurement range is -40 to 120°C and the humidity range is 0 to 100%RH, with 0.1°C and 0.1%RH resolution.

Overview

The XH-M452 is a 12V temperature and humidity controller module designed for automatic climate switching in DIY and small-scale projects. It combines an integrated sensor, a digital display and a relay output on a single board measuring 65 x 55 mm and weighing 69 g with the sensor attached. The board reads temperature and humidity and compares each value against user-defined start and stop thresholds. When a threshold is crossed, the relay output switches a connected device on or off. Because the relay is rated up to 10A, it can handle many fans, heaters, humidifiers and similar loads within that limit. All settings are entered through the onboard buttons, so no computer or app is required.

Key Features

  • Dual control: separate start and stop thresholds for both temperature and humidity.
  • Fine resolution: readings and settings step in 0.1°C and 0.1%RH increments.
  • Relay output: rated up to 10A for switching external equipment.
  • Integrated sensor: temperature and humidity sensing in one probe.
  • Digital display: shows live values and setting menus.
  • Factory reset: long-press the temperature and humidity + keys together for 3 seconds to restore defaults.

Specifications Explained

Voltage rating 12V: the board requires a 12V DC supply. Make sure your power source matches this before connecting loads.

Accuracy 0.1°C / 0.1RH: the display and settings resolve to one decimal place, which is useful when you need tight control bands.

Relay output up to 10A: the relay contacts can switch devices drawing up to 10A. Check the current draw of your fan, heater or humidifier before connecting it.

Operating range 0–100%RH: the humidity sensing covers the full relative humidity range.

Dimensions 65 x 55 mm, 69 g: compact enough for panel mounting or enclosure installation.

Compatibility and Requirements

The XH-M452 needs a 12V DC power supply and a connected load within the 10A relay limit. It does not include a power supply or load device. The integrated sensor is part of the package. No additional programming cable or software is required for basic threshold setup.

Typical Uses

  • Ventilation fan control in electronics enclosures
  • Humidity switching in terrariums and propagation boxes
  • Heater or cooler control in small drying cabinets
  • Automated climate experiments and educational projects
  • DIY greenhouse ventilation and misting triggers

What's in the Box

1 x XH-M452 Temperature and Humidity Controller Module with sensor.

Quick specs

Voltage Rating
12
Model No. / Name
XH M452
Operating Temperature (°C)
0% to 100%RH
Accuracy
0.1°C, 0.1RH
Output Type
Relay output
Output Capacity
up to 10A
See all specifications