
1 / 3 · Click to enlarge
AI Summary
A compact 12V charging control board that automatically switches a charger on at 12.4V and off at 14.8V, with two potentiometers for adjusting the thresholds. It helps prevent overcharging and wasted power on 12V storage battery setups.
Key Highlights
- Relay engages at 12.4V and releases at 14.8V by default
- Two potentiometers adjust start and disconnect charging voltages
- Powered from a 13.8-14.8V supply for 12V storage batteries
- Voltage tolerance of +/-0.1V for repeatable switching
- Automatic cut-off helps save energy and reduce overcharging
- Compact board format for easy panel or enclosure mounting
Ideal For
- Hobbyists building a small automatic 12V charger
- Solar and off-grid tinkerers maintaining 12V storage batteries
- Makers adding automatic charge cut-off to a project enclosure
- Technicians building a bench battery maintenance station
- Panel builders wanting adjustable charge thresholds
Buying Tip
Check that your charger and power supply sit within the 13.8-14.8V input range and set RP1 and RP2 with a meter before connecting a battery.
Elecvora expert review
Our verdict
A simple, adjustable charge controller board that does one job well: switching a 12V charger on and off at voltage points you can tune. It is best treated as a component in a larger build rather than a finished charger.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Adjustable start and stop thresholds via two potentiometers
- Clear default relay points of 12.4V and 14.8V
- Tight +/-0.1V tolerance for consistent switching
- Compact board that fits small enclosures
- Automatic cut-off reduces wasted charging time
Cons
- Power supply and charger are not included
- Output current is variable, so current handling depends on your wiring
- Requires basic wiring skill and a meter to set thresholds
Best for
Hobbyists and makers building an automatic 12V battery charging setup
Not ideal for
Users wanting a complete plug-and-play charger
Specifications
| Output Voltage | 12 |
|---|---|
| Output Current (A) | Variable |
| Battery cell type | Multiple |
| Power Supply Voltage (V) | 13.8-14.8V |
| Additional Specs. | Relay Operating Voltage: 12.4V Relay Disconnect Voltage: 14.8V Voltage Tolerance: '+/-0.1V Charging Type: 12V storage battery |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 15 × 11 × 1 cm |
What's in the box
- 1 x XH-M601 12V Battery Charging Control Board
Frequently Asked Questions
What does the XH-M601 actually do?
What power supply does it need?
Can I change the charging thresholds?
What battery type is it for?
Is the charger or battery included?
How accurate are the switching points?
Overview
The XH-M601 is a 12V battery charging control board designed to automate the charge cycle of a 12V storage battery. Instead of leaving a charger connected indefinitely, the board monitors battery voltage and uses an onboard relay to connect and disconnect charging at thresholds you can adjust. Out of the box it is set to begin charging at 12.4V and stop at 14.8V, making it a straightforward building block for a small automatic charger or maintenance setup.
Key Features
- Automatic relay control: the relay engages at 12.4V and releases at 14.8V, so charging starts and stops without manual intervention.
- Two adjustment potentiometers: RP1 sets the start-charging voltage and RP2 sets the disconnect-charging voltage.
- 12V storage battery focus: the board is specified for 12V storage batteries and a 13.8-14.8V power supply.
- Tight voltage tolerance: switching is rated at +/-0.1V, which keeps behaviour consistent between cycles.
- Energy-conscious operation: automatic power-off at the upper threshold reduces wasted electricity and unnecessary charging time.
Specifications Explained
Output voltage (12V) matches the nominal battery system the board is built for. Output current is variable, meaning the board controls the charging path rather than delivering a fixed current itself; the actual charge current depends on the charger and wiring you connect. Power supply voltage of 13.8-14.8V is the input range the board expects, so plan your supply around that window. Relay operating voltage 12.4V is where charging begins, and relay disconnect voltage 14.8V is where it stops. Tolerance of +/-0.1V tells you how precisely those points are held, which is useful when you want repeatable cut-off behaviour rather than a rough guess.
Compatibility and Requirements
The board is intended for 12V storage batteries and accepts multiple battery cell types as stated in the specifications. It requires a separate power supply within the 13.8-14.8V range and a charger arrangement suited to your battery; neither is included. Wiring, fusing and enclosure are the installer's responsibility. Because the output current is variable and not fixed by the board, confirm your charger and cabling can handle the current your battery needs.
Typical Uses
This module suits small automatic charging stations, battery maintenance benches, hobby power projects, and off-grid or backup setups where a 12V battery is charged periodically. It is also useful in panel-mounted control arrangements where a visible, adjustable cut-off point is preferred over a fully sealed charger.
Adjusting the Thresholds
RP1 changes the voltage at which charging starts: turning clockwise raises the setting and turning counter-clockwise lowers it. RP2 works the same way for the disconnect voltage. Adjust in small increments and verify with a meter before relying on the board in a permanent installation.
What's in the Box
One XH-M601 12V Battery Charging Control Board. Power supply, charger, battery and wiring are not included.
Quick specs
- Output Voltage
- 12
- Output Current (A)
- Variable
- Battery cell type
- Multiple
- Power Supply Voltage (V)
- 13.8-14.8V
- Additional Specs.
- Relay Operating Voltage: 12.4V Relay Disconnect Voltage: 14.8V Voltage Tolerance: '+/-0.1V Charging Type: 12V storage battery
- Shipping Weight
- 0.04 kg













