Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This battery charger module is a good fit for makers, students and electronics hobbyists. Main specs: output voltage 4.2; output current (a) 1; battery cell type 1S. Check that your power source supplies 4.2 before connecting it.

Key Highlights

  • Output Voltage: 4.2
  • Output Current (A): 1
  • Battery cell type: 1S

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Output Voltage4.2
Output Current (A)1
Battery cell type1S
Model No. / NameXH-M602 / HCW-M633
Display Accuracy0.1V
Control Accuracy0.1V
Output TypeOutput Switch
Length (mm)86
Width (mm)58
Weight (g)111
Shipping Weight0.12 kg
Shipping Dimensions9 × 6 × 3 cm

Overview

The XH-M602 Digital Battery Charging Control Module is listed in our battery charger module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Output Voltage: 4.2 (match this to your power supply; too high a voltage can damage the part)
  • Output Current (A): 1 (your supply must deliver at least this much current)
  • Battery cell type: 1S (note the battery type so you can order spares or the right charger)
  • Model No. / Name: XH-M602 / HCW-M633
  • Display Accuracy: 0.1V (measured diagonally; compare with the space you have before ordering)
  • Control Accuracy: 0.1V
  • Output Type: Output Switch
  • Length (mm): 86 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This XH-M602 Digital Battery Charging Control Module is used to charge batteries. The module has an input terminal for the 220V AC and an output terminal connected through an onboard relay. The module has a high-quality plastic transformer and a bright seven-segment three-digit display. The module can actively monitor the battery voltage through the Vin terminal and disable the 220V output connected to the battery charger when the battery is fully charged. Note: This Product is available in two different variants (XH-M602 and HCW-M633) with the same working we will ship it randomly.


Features:

  1. High-quality screw terminals are suitable for various wiring requirements.
  2. A plastic transformer that provides corrosion, moisture, rust resistance, high safety factor.
  3. The good quality seven-segment display with an accuracy of 0.1
  4. The module can monitor real-time battery voltage.
  5. According to the set value to start and stop, the board can disconnect input to the battery charger effectively protecting the battery from damage due to loss of power or overcharge.

Package Includes:

1 x XH-M602 / HCW-M633 Digital Battery Charging Control Module

Quick specs

Output Voltage
4.2
Output Current (A)
1
Battery cell type
1S
Model No. / Name
XH-M602 / HCW-M633
Display Accuracy
0.1V
Control Accuracy
0.1V
See all specifications