Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by XKB Connection, this vibration sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Vibration sensor; model no. / name Vibration Sensors; operating voltage (vdc) < 12V. Check that your power source supplies < 12V before connecting it.

Key Highlights

  • Item Type: Vibration sensor
  • Model No. / Name: Vibration Sensors
  • Operating Voltage (VDC): < 12V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeVibration sensor
Model No. / NameVibration Sensors
Operating Voltage (VDC)< 12V
Current20mA
Humidity Range25 to 95%
Display Resolution (pixel)1280x800
Shipping Weight0.01 kg
Shipping Dimensions11 × 7 × 2 cm

Overview

The XKB Connection SW-200DW-17T3G Vibration Sensors ROHS, made by XKB Connection, is listed in our vibration sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Vibration sensor
  • Model No. / Name: Vibration Sensors
  • Operating Voltage (VDC): < 12V (match this to your power supply; too high a voltage can damage the part)
  • Current: 20mA (your supply must deliver at least this much current)
  • Humidity Range: 25 to 95% (quoted range is usually line-of-sight; walls and interference shorten it)
  • Display Resolution (pixel): 1280x800 (measured diagonally; compare with the space you have before ordering)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 11 × 7 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The XKB SW-200 is a single ball type dual pass tilt sensing trigger switch. When the guide end (no pin end) of the product is tilted and the tilt angle is greater than 10 degrees, the product is in the open circuit, (off) state. When the horizontal state of the product is tilted, the trigger end (gold-plated pin end) is lower than the horizontal and the tilt angle is greater than 10 degrees, the product is in the closed circuit, (on) state.


Features:

  1. Tilt Sensing Mechanism: Dual-pass switch with single ball type.
  2. Circuit States: Open circuit (off) when tilted >10° at the guide end; closed circuit (on) when tilted >10° at the trigger end.
  3. Vibration Sensitivity: Easily triggered by shaking when placed horizontally.
  4. Durability: 100,000 cycle operating life.
  5. Sealed Construction: Waterproof and dustproof design.
  6. High Temperature Resistance: Withstands up to 120°C.
  7. Environmental Safety: Made of environmentally-friendly metal materials.

Package Includes:

1 x XKB Connection SW-200DW-17T3G Vibration Sensors ROHS

Quick specs

Item Type
Vibration sensor
Model No. / Name
Vibration Sensors
Operating Voltage (VDC)
&lt; 12V
Current
20mA
Humidity Range
25 to 95%
Display Resolution (pixel)
1280x800
See all specifications