Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A clamp-on liquid level sensor that detects water through a non-metallic container wall, so the probe never touches the fluid and no drilling is needed. It runs on 5 to 24 VDC, reports over RS485 and carries an IP67 ABS housing.

Key Highlights

  • Non-contact detection through non-metallic container walls, no drilling required
  • Wide 5 to 24 VDC operating voltage for flexible power sources
  • RS485 communication for level data in control and monitoring systems
  • IP67 ABS housing suits humid and splash-exposed installations
  • Works from 0 to 85°C and 5% to 100% humidity
  • Low current draw of about 5 mA keeps it easy to power

Ideal For

  • Makers building tank level monitoring with an RS485 controller
  • Aquarium and water feature owners checking level without drilling glass
  • Irrigation and drone spraying system builders
  • Medical and laboratory equipment designers
  • Smart appliance and pump control integrators

Buying Tip

Check that your tank or pipe is non-metallic and that your controller reads RS485 before ordering, because the sensor cannot sense through metal walls.

Elecvora expert review

Our verdict

A tidy solution when you cannot or will not put a hole in a tank. The 5 to 24 VDC range and RS485 output make it easy to fold into existing control gear, and the IP67 housing handles damp surroundings.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • No contact with the liquid, so no fouling or contamination risk
  • No drilling needed on non-metallic containers
  • Wide 5 to 24 VDC supply range
  • RS485 output suits control and monitoring systems
  • IP67 ABS housing for wet environments

Cons

  • Will not sense through metal container walls
  • Requires a controller or logger that reads RS485
  • Mounting surface must be flat and clean for reliable readings

Best for

Level monitoring on non-metallic tanks and pipes feeding an RS485 control system

Not ideal for

Metal tanks or simple setups with no RS485-capable controller

Specifications

Model No. / NameWater Level Sensor
Operating Voltage (VDC)5 to 24
MaterialABS
Current consumption5
Output Current (mA)1 to 100
Operating Temperature (°C)0 to 85
Communication ModeRS485
Humidity Range5% to 100%
Waterproof LevelIP67
Shipping Weight0.03 kg
Shipping Dimensions3 × 3 × 2 cm

What's in the box

  • 1 x XKC-Y25-V Intelligent Non-Contact Liquid Water Level Sensor

Frequently Asked Questions

Does the sensor touch the liquid?
No. It mounts on the outside of a non-metallic container and detects the liquid through the wall, so the fluid stays sealed inside.
Can it be used on a metal tank?
No. The sensor is intended for non-metallic containers, since it reads through the wall rather than through metal.
What power supply does it need?
It accepts 5 to 24 VDC and draws around 5 mA, so it can run from common 5 V, 12 V or 24 V supplies.
How does it connect to a controller?
Level information is reported over an RS485 communication line, so your controller or logger needs an RS485 port.
Is it suitable for outdoor or damp locations?
The ABS housing is rated IP67 and the sensor works from 0 to 85°C at 5% to 100% humidity, which suits sheltered outdoor and wet plant areas.
What is included with the sensor?
The package contains 1 x XKC-Y25-V Intelligent Non-Contact Liquid Water Level Sensor.

Overview

The XKC-Y25-V is a non-contact liquid level sensor built for one job: telling you whether liquid is present at a chosen point on a tank or pipe without ever touching that liquid. It clamps to the outside of a non-metallic container and reads through the wall, so the fluid stays sealed in and the container stays intact. That makes it useful where drilling a port is impractical or where the medium is something you would rather not expose a probe to.

Inside, the sensor uses signal processing to interpret the level reading, and the housing is a compact ABS block sealed to IP67. Power comes from a 5 to 24 VDC supply, current consumption is around 5 mA, and level information is reported over an RS485 line with an output current range of 1 to 100 mA.

Key Features

  • Non-contact sensing: detects liquid through the wall of a non-metallic container.
  • No boring required: mount on the outside of the tank to keep the vessel sealed.
  • Broad voltage range: accepts 5 to 24 VDC, covering common adapters and control supplies.
  • RS485 communication: integrates with controllers and monitoring systems that read a serial level signal.
  • IP67 ABS housing: resists dust and water ingress in damp or outdoor enclosures.
  • Environmental range: rated for 0 to 85°C and 5% to 100% humidity.

Specifications Explained

Voltage and current

The 5 to 24 VDC input means the sensor can share a supply with common 5 V, 12 V or 24 V control hardware. Current consumption is about 5 mA, so it adds very little load, and the 1 to 100 mA output current range covers typical signalling needs.

RS485 output

RS485 is a serial communication standard used over longer cable runs in industrial and building control. If your controller or data logger accepts RS485, the sensor can report level state over that bus rather than a simple on/off line.

IP67 and temperature

IP67 means the ABS housing is protected against dust and against temporary immersion, which is relevant around tanks and wet plant areas. The 0 to 85°C operating range and 5% to 100% humidity rating cover most indoor and sheltered outdoor installations.

Compatibility and Requirements

The sensor is designed for non-metallic containers, since it reads through the wall rather than through metal. It needs a 5 to 24 VDC supply and a receiving device that can read an RS485 signal. Confirm that your controller or logger supports RS485 before wiring it in.

Typical Uses

  • Water towers and storage tanks
  • Sewage and wastewater treatment equipment
  • Agricultural and drone irrigation systems
  • Medical equipment and laboratory setups
  • Aquariums and smart appliances

What's in the Box

1 x XKC-Y25-V Intelligent Non-Contact Liquid Water Level Sensor.

Quick specs

Model No. / Name
Water Level Sensor
Operating Voltage (VDC)
5 to 24
Material
ABS
Current consumption
5
Output Current (mA)
1 to 100
Operating Temperature (°C)
0 to 85
See all specifications