Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A lightweight plastic mount that attaches 22xx series brushless motors to a firewall using a 16mm or 19mm rear hole pattern. It weighs about 10g and gives you a simple, replaceable mounting solution for RC builds.

Key Highlights

  • Fits 22xx series brushless motors with a 22mm body
  • Rear hole spacing of 16mm and 19mm centre to centre
  • Strong plastic construction with a durable finish
  • Weighs approximately 10g on its own
  • Compact 6 x 5 x 4 cm shipping size
  • Simple firewall mounting for new builds and repairs

Ideal For

  • RC builders mounting 22xx brushless motors
  • Pilots repairing a firewall or motor mount
  • Hobbyists keeping spare mounting parts
  • Model aircraft enthusiasts working with outrunner motors

Buying Tip

Measure your motor's rear mounting holes centre to centre and confirm they match 16mm and 19mm before ordering.

Elecvora expert review

Our verdict

A simple, light plastic bracket that does one job well: holding a 22xx motor with a 16mm or 19mm rear pattern. It is a sensible spare to have, provided you check the hole spacing first.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at about 10g
  • Fits two common rear hole spacings
  • Simple plastic construction
  • Easy to replace

Cons

  • Screws and motor not included
  • Only fits motors with matching 16mm or 19mm spacing

Best for

Builders using 22xx brushless motors with a 16mm or 19mm rear mounting pattern

Not ideal for

Motors with a different rear hole spacing or larger body size

Specifications

ProductxxD motor mount
Weight (g)10
Shipping Weight0.008 kg
Shipping Dimensions6 × 5 × 4 cm

What's in the box

  • 1 x xxD motor mount

Frequently Asked Questions

What motors does this mount fit?
It is designed for 22xx series brushless motors with a 22mm body and a rear hole pattern of 16mm and 19mm centre to centre.
How much does the mount weigh?
The mount weighs approximately 10g by itself.
Are screws included?
No, the package includes only the motor mount. You will need suitable screws for your firewall and motor.
How do I check compatibility?
Measure the centre-to-centre distance of the rear mounting holes on your motor. It should match 16mm in one direction and 19mm in the other.
What is included in the box?
The package contains 1 x xxD motor mount.
How should I care for the mount?
Keep it clean and check the fasteners regularly. Replace it if the plastic shows cracks or damage.

Overview

The xxD motor mount is a compact plastic bracket made to hold a 22xx series brushless motor against a firewall or mounting plate. Instead of clamping the motor body, it uses the rear mounting holes, giving you a clean and repeatable way to secure the motor to your model. The part is aimed at builders and repairers who want a straightforward mounting solution that is easy to swap out when needed.

Key Features

  • Designed for 22xx series brushless motors with a 22mm body
  • Rear hole spacing of 16mm centre to centre in one direction and 19mm in the other
  • Made from strong plastic with a durable, attractive finish
  • Weighs approximately 10g by itself, keeping the airframe light
  • Compact shipping dimensions of 6 x 5 x 4 cm

Specifications Explained

The most important figure is the hole spacing. The mount has a 16mm centre-to-centre distance in one direction and 19mm in the other. Check your motor's rear mounting pattern against these numbers before ordering, because a match here is what makes the mount work. The 10g weight is light enough that it will not noticeably affect balance on most models. The plastic construction keeps the part rigid while remaining easy to work with, and the finish helps it resist the wear of normal use.

Compatibility and Requirements

This mount is intended for 22xx series brushless motors with a 22mm body and a rear hole pattern matching 16mm and 19mm centre-to-centre spacing. It is a mounting bracket only; motor, screws, and firewall are not included. Confirm your motor's rear hole spacing before purchase, as other patterns will not fit.

Typical Uses

Use the xxD mount when building or repairing a model that uses a 22xx outrunner, or keep one as a spare in your field box. It is useful for firewall installations where the motor needs to be fixed securely and removed easily for maintenance.

What's in the Box

1 x xxD motor mount.

Quick specs

Product
xxD motor mount
Weight (g)
10
Shipping Weight
0.008 kg
Shipping Dimensions
6 × 5 × 4 cm
See all specifications