Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This load sensor is a good fit for makers, students and electronics hobbyists. Main specs: strain limit 0.02; base size long the width of 5X4.5mm; base material modified phenolic substrate. Check that your power source supplies 5V before connecting it.

Key Highlights

  • Strain limit: 0.02
  • Base Size: long the width of 5X4.5mm
  • Base Material: modified phenolic substrate

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Strain limit0.02
Base Sizelong the width of 5X4.5mm
Base Materialmodified phenolic substrate
Resistance (Ohm)350 ohms
Fatigue life>10000000 times
Voltage (V)5V
Shipping Weight0.03 kg
Shipping Dimensions6 × 6 × 2 cm

Overview

The Y3 Strain Gauge Bending Sensor with Amplifier is listed in our load sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Strain limit: 0.02
  • Base Size: long the width of 5X4.5mm (measure your mounting space before ordering)
  • Base Material: modified phenolic substrate (affects weight, heat handling and how the part wears)
  • Resistance (Ohm): 350 ohms
  • Fatigue life: >10000000 times
  • Voltage (V): 5V (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 6 × 6 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Strain Gauge Bending Sensor Module Y3 Weighing Amplifier Module. A strain gauge is a device used to measure strain on an object. This strain gauge module uses the strain gauge BF350-3AA, it has an onboard amplifier and potentiometer to adjust the measured results A Strain gauge is a sensor whose resistance varies with applied force; It converts force, pressure, tension, weight, etc., into a change in electrical resistance which can then be measured A strain gauge works on the principle of electrical conductance and its dependence on the conductor's geometry. Whenever a conductor is stretched within the limits of its elasticity, it doesn't break but, gets narrower and longer.

Features:

  1. Two tubes of reverse protection ~ (to prevent the power supply from connected to the back)
  2. On board with a blue LED power indicator
  3. Analog output
  4. The higher the bending degree, the higher the output voltage
  5. Zero potentiometer
  6. Can be used to adjust the output voltage of the starting voltage

Packages Includes: 

1 x Strain Gauge Bending Sensor Module

Quick specs

Strain limit
0.02
Base Size
long the width of 5X4.5mm
Base Material
modified phenolic substrate
Resistance (Ohm)
350 ohms
Fatigue life
>10000000 times
Voltage (V)
5V
See all specifications

Explore more