
1 / 3 · Click to enlarge
AI Summary
A compact strain gauge bending sensor module with built-in amplifier that outputs an analog voltage proportional to applied force. It simplifies adding weight or force measurement to Arduino and Raspberry Pi projects with a 5V supply.
Key Highlights
- Strain gauge load cell for precise force and weight sensing
- Integrated high-gain amplifier delivers stable analog output
- 5V DC operation works with Arduino and Raspberry Pi
- Compact 35 x 17 mm board fits space-constrained builds
- Tool-free installation and easy replacement
- Ideal for DIY scales, balances, and force measurement
Ideal For
- Makers building DIY weighing scales
- Students learning about strain gauges and load cells
- Engineers prototyping force measurement systems
- Arduino and Raspberry Pi enthusiasts
- Hobbyists creating smart kitchen scales
Buying Tip
Check that your microcontroller has an analog input and can supply a stable 5V, since the module outputs an analog voltage that must be read by an ADC.
Elecvora expert review
Our verdict
A handy, low-cost module for adding basic force or weight sensing to microcontroller projects. The integrated amplifier saves time, though it requires calibration for meaningful readings.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated amplifier simplifies wiring
- Compact size fits small builds
- Works with common 5V boards
- Tool-free installation
Cons
- Requires calibration for accurate results
- Analog output needs an ADC on the host
- Limited to 5V supply
Best for
DIY scale and force-sensing projects with Arduino or Raspberry Pi
Not ideal for
High-precision commercial weighing applications
Specifications
| Operating Voltage (V) | 5 DC |
|---|---|
| Output Type | Analog Voltage Signal |
| Sensor Type | Strain Gauge Based Load Cell |
| Length (mm) | 35 |
| Width (mm) | 17 |
| Weight (g) | 03 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 4 × 3 × 2 cm |
What's in the box
- 1 x Y3 Strain Gauge Bending Sensor Weighing Amplifier Module Version B
Frequently Asked Questions
What is the operating voltage of this module?
What type of output does it provide?
Can I connect it directly to an Arduino?
Does it work with Raspberry Pi?
What is included in the package?
How do I calibrate the sensor?
Overview
The Y3 Strain Gauge Bending Sensor Weighing Amplifier Module Version B is a compact load measurement board that turns mechanical bending or force into an analog voltage signal. At its core is a strain gauge load cell paired with an integrated high-gain amplifier, so you get a usable output without designing external signal conditioning circuitry. The module runs from a 5V DC supply and is intended for straightforward connection to common development boards such as Arduino and Raspberry Pi. With a board size of just 35 x 17 mm and a weight of about 3 grams, it fits easily into small enclosures and prototypes. Whether you are building a digital scale, a force-sensing fixture, or a learning project, this module provides a practical starting point for weight and bending measurements.
Key Features
- Strain gauge sensing element: detects bending and force with good sensitivity for measurement tasks.
- Onboard high-gain amplifier: boosts the low-level sensor signal to a stable analog voltage output.
- 5V DC operation: matches the logic supply of many hobbyist and educational boards.
- Analog voltage output: easy to read with an ADC pin on a microcontroller.
- Compact dimensions: 35 mm length and 17 mm width suit tight spaces.
- Tool-free installation: simple mounting and replacement for quick setup.
Specifications Explained
Operating voltage (5V DC): the module expects a regulated 5V supply, which is commonly available on Arduino boards and many Raspberry Pi setups. Output type (analog voltage signal): the output changes with applied force, so you read it with an analog-to-digital converter. Sensor type (strain gauge based load cell): this is a resistive sensing element that deforms under load and produces a small signal, which the amplifier makes readable. Dimensions (35 x 17 mm): the small footprint helps when space is limited. Weight (3 g): negligible for most assemblies. Note that the listed shipping dimensions (4 x 3 x 2 cm) and product dimensions (170 x 130 x 130 mm) refer to packaging and should not be confused with the board size.
Compatibility and Requirements
The module is designed for 5V DC operation and outputs an analog voltage, making it compatible with microcontrollers that have analog inputs, such as Arduino and Raspberry Pi (with an ADC). You will need a 5V power source and a way to read the analog signal. No external amplifier is required because the module includes one. Installation is tool-free and replacement is straightforward.
Typical Uses
- DIY digital weighing scales and electronic balances
- Smart kitchen scale projects
- Force measurement and bending detection experiments
- Educational demonstrations of strain gauge principles
- Prototyping load sensing in small devices
What's in the Box
Package includes: 1 x Y3 Strain Gauge Bending Sensor Weighing Amplifier Module Version B.
Quick specs
- Operating Voltage (V)
- 5 DC
- Output Type
- Analog Voltage Signal
- Sensor Type
- Strain Gauge Based Load Cell
- Length (mm)
- 35
- Width (mm)
- 17
- Weight (g)
- 03













