Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 24V 250W brushed motor spins at 2650RPM and includes an 11-tooth #25 sprocket plus a 4-bolt base mount. It is a straightforward drive solution for DIY e-bike and small EV projects.

Key Highlights

  • 24V 250W brushed DC motor with 2650RPM rated speed
  • 100 N-cm rated torque and 50 kg-cm stall torque
  • 12.2mm shaft with 11-tooth #25 chain sprocket included
  • 4-bolt base mounting bracket with threaded M6 holes
  • Rotation direction reversible by swapping battery polarity
  • Compact 104mm x 90mm body weighing about 1500g

Ideal For

  • DIY e-bike builders using 24V systems
  • Makers converting bicycles to electric drive
  • Small electric scooter and go-kart projects
  • Hobbyists needing a compact brushed motor
  • Chain-drive custom vehicle builders

Buying Tip

Confirm your battery is 24V and pair this motor with a brushed controller rated for at least 11A continuous current.

Elecvora expert review

Our verdict

The Yalu MY1016 is a practical, low-cost brushed motor for small e-bike and DIY EV projects. Its integrated sprocket and mounting bracket reduce setup complexity, though it requires a separate controller and battery.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple two-wire brushed connection
  • Includes sprocket and mounting bracket
  • Compact and lightweight at 1500g
  • Reversible rotation via polarity swap

Cons

  • Brushed motor requires periodic maintenance
  • No controller or battery included
  • Limited to 24V systems

Best for

DIY e-bike builders on a budget

Not ideal for

High-power or high-speed applications

Specifications

Item TypeEbike Motor
Motor TypeBrushed motor
Rated Current (A)11
Rated Voltage (VDC)24
Rated Speed (RPM)2650
Rated Torque (N-cm)100
No-load current (A)≤2.2
Shaft Diameter12.2 mm
Cable Length0.25
Dimensions (L x W x H) mm104mm x 90mm
Weight (g)1500
Model No. / NameMY1016 250W
Rated Torque (kg-cm)8
Operating Power250 Watt.
GearboxNo
Stall Torque (kg-cm)50
Operating Voltage (VDC)24
Shipping Weight2 kg
Shipping Dimensions20 × 15 × 10 cm

What's in the box

  • 1 x Yalu MY1016 250W 24V 2650RPM brushed DC motor with 11-tooth #25 sprocket and mounting bracket

Frequently Asked Questions

What voltage battery does this motor require?
It is designed for 24V DC systems. Using a different voltage may affect performance or damage the motor.
Can I reverse the rotation direction?
Yes, because it is a brushed DC motor, swapping the positive and negative battery leads will reverse the direction of rotation.
Does it come with a speed controller?
No, a controller is not included. You will need a compatible brushed motor controller for speed control.
What is included in the package?
The package includes one Yalu MY1016 250W 24V 2650RPM brushed DC motor with an 11-tooth #25 sprocket and mounting bracket.
What type of chain does the sprocket use?
The sprocket is designed for #25 chain, which is commonly used in small e-bike and scooter drives.
How do I maintain this motor?
Keep the motor clean and dry, check brushes periodically for wear, and ensure connections are tight. Avoid exposure to water and dust.

Overview

The Yalu MY1016 is a brushed DC motor built for e-bike and light electric vehicle projects. It operates at 24V and delivers 250W of power at a rated speed of 2650RPM. The motor comes with a pre-installed 11-tooth #25 chain sprocket and a 4-bolt mounting bracket on the base with threaded M6 holes, so it can be attached to a frame or adapter plate without extra fabrication. With a 12.2mm shaft and a compact 104mm x 90mm body, it fits many custom builds where space is limited.

Key Features

  • Brushed DC design: Simple two-wire connection; reverse rotation by swapping battery polarity.
  • Integrated sprocket: 11-tooth #25 chain sprocket ready for chain drive setups.
  • Mounting bracket: 4-bolt base with M6 threads for secure attachment.
  • Compact and lightweight: Approximately 1500g and 104mm x 90mm footprint.
  • Speed controllable: Works with compatible brushed motor controllers for variable speed.

Specifications Explained

Rated voltage (24V) and power (250W): This motor is intended for 24V battery systems. At 250W, it suits lightweight e-bike and scooter projects where efficiency and range matter.

Rated speed (2650RPM) and torque (100 N-cm): The motor spins at 2650RPM at rated load, producing 100 N-cm of torque. Stall torque is 50 kg-cm, indicating strong starting force for its size.

Rated current (11A) and no-load current (≤2.2A): Expect around 11A draw under normal load; no-load current is low, helping preserve battery when not under load.

Shaft and sprocket: The 12.2mm shaft carries an 11-tooth #25 sprocket, a common size for small chain drives.

Dimensions and weight: The motor body measures 104mm x 90mm and weighs about 1500g, making it easy to mount on most frames.

Compatibility and Requirements

This motor requires a 24V DC power source and a compatible brushed motor controller for speed control. The 11-tooth #25 sprocket matches #25 chain. The 4-bolt base with M6 threads accepts standard M6 bolts (not included). A separate battery, controller, throttle, and wiring are needed to complete a build.

Typical Uses

Ideal for DIY e-bike conversions, electric scooters, go-karts, and small motorized projects where a compact 24V brushed motor is suitable. The integrated sprocket and mounting bracket simplify chain-drive setups.

What's in the Box

1 x Yalu MY1016 250W 24V 2650RPM brushed DC motor with 11-tooth #25 sprocket and mounting bracket.

Quick specs

Item Type
Ebike Motor
Motor Type
Brushed motor
Rated Current (A)
11
Rated Voltage (VDC)
24
Rated Speed (RPM)
2650
Rated Torque (N-cm)
100
See all specifications