
1 / 7 · Click to enlarge
AI Summary
A complete right side geared ebike kit built around the YALU MY1016Z3 24V 350W motor with a 9.78:1 reduction ratio. It bundles the motor, controller, throttle, freewheel, chain, brake levers and mounting hardware for a single-build purchase.
Key Highlights
- 24V 350W geared motor with 9.78:1 reduction ratio
- Rated 3000 RPM with 3850 RPM unloaded speed
- Rated current 12.5A or less, unloaded current 2A or less
- Runs clockwise or counterclockwise by reversing power wires
- Matching 24V 350W controller, throttle and brake levers included
- Fits common 22 to 28 inch bicycles with mounting plate and bolts
Ideal For
- DIY builders converting a 22 to 28 inch bicycle to electric
- Makers assembling a compact 24V geared drive project
- Scooter and quad builders using a 350W reduction motor
- Riders who want low-speed torque from a geared setup
- Hobbyists who prefer a bundled kit over sourcing parts separately
Buying Tip
Confirm your frame fits the 22 to 28 inch range and that you can supply a separate 24V battery, since the kit ships without one.
Elecvora expert review
Our verdict
This is a sensible starting point for anyone building a 24V geared ebike, because the motor, controller, drivetrain and controls arrive together. The 9.78:1 reduction gives useful torque, but you still need to supply a battery and confirm your frame size fits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Complete bundle covering motor, controller, throttle, brakes and drivetrain
- 9.78:1 geared reduction for strong low-speed torque
- Reversible rotation simplifies different mounting layouts
- Ignition key switch and headlight included for a practical build
- Clear 22 to 28 inch bicycle fit guidance
Cons
- Battery and charger are not included
- Not suitable for special models, variable speed models or bikes under 16 inches
- Fitting to frames below 22 inches requires extra modification work
Best for
DIY builders converting a 22 to 28 inch bicycle with a 24V geared drive
Not ideal for
Riders wanting a plug-and-ride kit with battery included, or owners of special and variable speed models
Specifications
| Item Type | Kit |
|---|---|
| Model No. / Name | MY1016Z3 |
| Power Rating | 350 |
| Rated Speed (RPM) | 3000 |
| Operating Voltage (VDC) | 24 |
| Unload Speed(RPM) | 3850 |
| Rated Current (A) | Less than or equal to 12.5 |
| Unload Current (A) | Less than or equal to 2A |
| Reduction ratio | 9.78:1 |
| Shipping Weight | 5.3 kg |
| Shipping Dimensions | 28 × 18 × 19 cm |
What's in the box
- 1 x MY1016Z3 24V 350W geared DC ebike motor
- 1 x 24V 350W controller
- 1 x freewheel
- 1 x freewheel adapter
- 1 x pair of throttles (left and right)
- 1 x pair of brake levers (left and right)
- 1 x 25H high-quality chain
- 1 x mounting plate with bolts
- 1 x axle with nuts
- 1 x ignition key switch with two keys
- 1 x ebike headlight
- 1 x plastic connector housings set
- 1 x charger connector holder
Frequently Asked Questions
What is included in this ebike kit?
Does the kit include a battery?
Which bicycles will this kit fit?
Can the motor spin in either direction?
What do the speed and current ratings mean?
How much does the kit weigh and how does it ship?
Overview
The YALU MY1016Z3 is a right side geared ebike kit centred on a 24V 350W reduction motor. Geared motors trade top-end speed for torque, and this unit does that with a 9.78:1 reduction ratio, making it a practical choice for riders who want strong low-speed pull from a compact drive. The kit gathers the parts most builders would otherwise order one by one: the motor, a matching 24V 350W controller, freewheel and adapter, a pair of throttles, a pair of brake levers, a 25H chain, a mounting plate with bolts, an axle with nuts, an ignition key switch with two keys, a headlight, plastic connector housings and a charger connector holder.
Key Features
- Geared reduction drive: a 9.78:1 ratio converts motor speed into usable torque at the wheel.
- Reversible rotation: swap the motor's power wires to run it clockwise or counterclockwise for your mounting layout.
- Matched electronics: the included 24V 350W controller is specified for this motor's voltage and power class.
- Drivetrain parts included: freewheel, freewheel adapter and 25H chain are supplied together.
- Controls and switching: left and right throttles, brake levers and an ignition key switch with two keys.
- Mounting hardware: mounting plate with bolts and an axle with nuts are part of the package.
Specifications Explained
Power and voltage
The motor is rated at 350W on 24 VDC. Rated current is 12.5A or less, while unloaded current stays at 2A or less, which tells you the drive draws very little when spinning freely without load.
Speed and gearing
Rated speed is 3000 RPM and unloaded speed is 3850 RPM. Those figures describe the motor shaft, not the wheel, so the 9.78:1 reduction is what turns that into realistic road speed and climbing ability.
Size and weight
Shipping weight is 5.3 kg and the shipping carton measures 28 x 18 x 19 cm, useful for planning delivery and bench space before the kit arrives.
Compatibility and Requirements
The kit is intended for installation on common 22 to 28 inch bicycles. Fitting it to a bike below 22 inches increases the difficulty of modification. It is not suitable for special models, variable speed models or models under 16 inches. Batteries are not included, so a separate 24V battery pack and the matching charger connection are required. Refer to the video section for assembly guidance and controller connection details.
Typical Uses
This kit suits DIY builders converting a standard bicycle into an electric ride, as well as small scooters and quad projects that use a geared reduction motor in this power class. The included headlight and key switch support a practical everyday build rather than a bare motor swap.
What's in the Box
- 1 x MY1016Z3 24V 350W geared DC ebike motor
- 1 x 24V 350W controller
- 1 x freewheel and 1 x freewheel adapter
- 1 x pair of throttles (left and right)
- 1 x pair of brake levers (left and right)
- 1 x 25H high-quality chain
- 1 x mounting plate with bolts and 1 x axle with nuts
- 1 x ignition key switch with two keys
- 1 x ebike headlight
- 1 x plastic connector housings set and 1 x charger connector holder

Quick specs
- Item Type
- Kit
- Model No. / Name
- MY1016Z3
- Power Rating
- 350
- Rated Speed (RPM)
- 3000
- Operating Voltage (VDC)
- 24
- Unload Speed(RPM)
- 3850



















