Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete 48 V 350 W brushless motor kit for electric tricycles, including the motor, matching controller, chain, sprocket and throttle. It delivers 15.36 N.m of torque at a 480 RPM rated speed for steady trike power.

Key Highlights

  • 350 W brushless motor rated for 48 V operation at 9.4 A
  • 15.36 N.m torque and 480 RPM rated speed for trike loads
  • Includes matching 48 V 350 W brushless controller
  • 420 chain, sprocket and four-hole flywheel supplied
  • Thumb throttle, travel switch, circuit breaker and power lock included
  • Compact 180 x 140 mm motor body weighing about 9.5 kg

Ideal For

  • Owners repairing or upgrading a 48 V electric tricycle
  • Workshops building cargo and utility trikes
  • Makers converting a three-wheeler for local transport
  • Riders who want a matched motor and controller set
  • Small mobility trike projects needing modest, steady power

Buying Tip

Measure your trike's motor mounting space and check the rear axle and sprocket layout against the supplied four-hole flywheel before ordering, since the 180 x 140 mm motor and chain drive must physically fit.

Elecvora expert review

Our verdict

A sensible kit for anyone working on a 48 V tricycle, because the motor, controller and drivetrain parts arrive together and are already matched. The 350 W output and 15.36 N.m torque suit loaded, steady use rather than fast riding.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Motor and 48 V controller supplied as a matched pair
  • Drivetrain parts included: 420 chain, sprocket, flywheel and adaptor
  • Useful torque figure for loaded tricycle work
  • Control hardware such as throttle, travel switch and power lock included
  • Compact motor body at 180 x 140 mm

Cons

  • Battery and wiring are not included
  • Mounting and chain alignment still need checking on your frame
  • Final speed depends on your wheel and sprocket setup, not a fixed figure

Best for

48 V electric tricycle repair and conversion projects

Not ideal for

High-speed or high-power builds beyond a 350 W, 48 V system

Specifications

Item TypeKit
Motor TypeBrushless Motor
Rated Current (A)9.4
Rated Voltage (VDC)48
Power Rating350
Rated Speed (RPM)480
Gear Ratio0.045833333
No Load Current (mA)5
Torque15.36 N.m
Full load Current9.4A
Dimensions (L x W x H) mm180 mm × 140 mm
Weight (g)9500
Shipping Weight7.815 kg
Shipping Dimensions25 × 25 × 25 cm

What's in the box

  • 1 x 48 V 350 W BM1418ZXF brushless motor
  • 1 x 48 V 350 W brushless controller
  • 1 x 420 chain
  • 1 x four-hole flywheel without teeth
  • 1 x freewheel adaptor
  • 1 x sprocket
  • 1 x throttle
  • 1 x travel switch
  • 1 x circuit breaker
  • 1 x power lock

Frequently Asked Questions

What voltage does this motor kit run on?
The motor and controller are both rated for 48 V. The motor is rated at 350 W with a 9.4 A full load current.
Does the kit include a battery?
No. A 48 V battery is not part of the package, so you will need to supply one along with the wiring to the controller.
What is included in the box?
You get the BM1418ZXF motor, a 48 V 350 W brushless controller, a 420 chain, a four-hole flywheel without teeth, a freewheel adaptor, a sprocket, a throttle, a travel switch, a circuit breaker and a power lock.
How much torque does the motor produce?
The rated torque is 15.36 N.m at a rated speed of 480 RPM, which suits steady movement with a loaded tricycle.
Will it fit my tricycle?
It suits 48 V tricycle setups, but you should check the mounting space for the 180 x 140 mm motor and confirm your axle and sprocket arrangement match the supplied flywheel and adaptor.
How should I look after the kit?
Keep the controller dry and ventilated, check chain tension and terminal tightness regularly, and isolate power with the circuit breaker before any maintenance.

Overview

The YALU BM1418ZXF is a 48 V brushless motor kit aimed at electric tricycle owners who need to replace a worn motor or assemble a new drivetrain. The motor is rated at 350 W and 9.4 A, with a rated speed of 480 RPM and 15.36 N.m of torque. Those figures describe a unit built for steady, loaded movement rather than high speed, which is what a tricycle chassis generally needs.

The kit goes beyond the motor alone. A matching 48 V 350 W brushless controller is included, along with the mechanical parts that connect motor to wheel: a 420 chain, a sprocket, a four-hole flywheel without teeth and a freewheel adaptor. Control hardware is covered too, with a thumb throttle, travel switch, circuit breaker and power lock.

Key Features

  • Brushless motor design for efficient running and low no-load current draw of 5 mA.
  • 48 V, 350 W rating with a full load current of 9.4 A.
  • 15.36 N.m torque to help a loaded trike pull away and climb.
  • 480 RPM rated speed matched to the supplied sprocket and chain drive.
  • Compact housing measuring 180 mm by 140 mm and weighing around 9.5 kg.
  • Kit format that bundles controller, drivetrain and control parts in one purchase.

Specifications Explained

Power and current

350 W at 48 V is a modest, controlled power level. The 9.4 A rated and full load current tells you the controller and wiring need to handle roughly that figure continuously. Keep that in mind when checking your battery and cable sizing.

Speed and torque

The motor turns at a rated 480 RPM and produces 15.36 N.m of torque. Final road speed depends on your wheel size and sprocket ratio, so plan gearing around the load you carry rather than expecting a fixed top speed.

Gear ratio

The listed gear ratio of 0.0458 describes the internal reduction between motor and output. Use it together with your wheel and sprocket setup when working out the drive ratio you want.

Size and weight

At 180 x 140 mm and about 9.5 kg, the motor needs a solid mounting point on the frame. Check clearance around the intended mounting area before ordering.

Compatibility and Requirements

This kit is intended for 48 V electric tricycle systems. It ships with a 48 V 350 W brushless controller, so the motor and controller are matched. You will still need a 48 V battery, wiring to connect the pack to the controller, and a frame or mount that accepts the motor and chain drive. Confirm that your trike's rear wheel, axle and sprocket arrangement suit the supplied four-hole flywheel and freewheel adaptor.

Typical Uses

Typical applications include cargo tricycles, utility and workshop trikes, and mobility-style three-wheelers that run on 48 V. The kit also suits repair jobs where the original motor or controller has failed and a matched replacement set is simpler than sourcing parts individually.

What's in the Box

  • 1 x 48 V 350 W BM1418ZXF brushless motor
  • 1 x 48 V 350 W brushless controller
  • 1 x 420 chain
  • 1 x four-hole flywheel without teeth
  • 1 x freewheel adaptor
  • 1 x sprocket
  • 1 x throttle
  • 1 x travel switch
  • 1 x circuit breaker
  • 1 x power lock

Quick specs

Item Type
Kit
Motor Type
Brushless Motor
Rated Current (A)
9.4
Rated Voltage (VDC)
48
Power Rating
350
Rated Speed (RPM)
480
See all specifications