
1 / 4 · Click to enlarge
AI Summary
A 24V 250W brushed DC motor rated at 120 RPM with 9.2 kg-cm of torque and a 17 mm D shaft. It runs in either direction by reversing the power wires, making it a simple fit for e-bike and scooter reduction drives.
Key Highlights
- 24V 250W brushed DC motor with 13.4 A rated current
- 120 RPM rated speed and 9.2 kg-cm rated torque
- 17 mm D-type shaft, 44 mm long, for secure coupling
- Rotation reverses by swapping the motor power wires
- IP33 protection grade with Class E insulation
- Compact 160 x 130 mm body weighing about 2.82 kg
Ideal For
- DIY e-bike builders using reduction or chain drives
- Scooter and small EV repairers replacing a 24V brushed motor
- Makers building compact 24V electric projects
- Builders needing a reversible low-speed motor with a D shaft
Buying Tip
Confirm your controller and battery are 24V and can supply the motor's 13.4 A rated current, and check that your pulley or sprocket bore suits a 17 mm D shaft before ordering.
Elecvora expert review
Our verdict
The MY1016ZL is a sensible, no-fuss brushed motor for 24V builds that need slow, torquey drive rather than high speed. Its D shaft and reversible wiring make installation straightforward for anyone comfortable with basic electrical work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Predictable 24V 250W power draw at 13.4 A
- Strong 9.2 kg-cm torque at a controllable 120 RPM
- Reversible rotation by swapping two wires
- D-profile shaft grips pulleys and sprockets well
Cons
- Brushed design means brushes will wear over time
- IP33 rating is not suitable for submersion or heavy rain
- Controller, throttle and battery must be sourced separately
Best for
DIY e-bike and scooter builds using a 24V reduction drive
Not ideal for
Riders wanting a silent, maintenance-free hub motor for wet climates
Specifications
| Item Type | Ebike Motor |
|---|---|
| Motor Type | Brushed motor |
| Rated Current (A) | 13.4 |
| Rated Voltage (VDC) | 24 |
| Rated Speed (RPM) | 120 |
| Rated Torque (kg-cm) | 9.2 |
| Shaft Diameter | 17 mm |
| Shaft Length (mm) | 44 |
| Insulation Class | E |
| Protect Grade | IP33 |
| Shaft Type | D |
| Dimensions (L x W x H) mm | 160mm × 130mm |
| Weight (g) | 2820 |
| Shipping Weight | 2.846 kg |
| Shipping Dimensions | 17 × 14 × 13 cm |
What's in the box
- 1 x MY1016ZL 24V 250W Brushed DC Motor
Frequently Asked Questions
What voltage does this motor run on?
Can I reverse the direction of rotation?
What shaft does it have?
Is a controller or battery included?
How fast does it spin?
Can it be used in the rain?
Overview
The YALU MY1016ZL is a brushed DC electric motor rated at 24V and 250W. It is designed as a compact drive unit for electric bikes, scooters and similar small vehicles, and it is also a practical option for DIY builds that need a low-speed, high-torque motor. With a rated speed of 120 RPM and 9.2 kg-cm of torque, it is suited to reduction-drive arrangements rather than direct high-speed drive.
Because it is a brushed design, wiring is simple: two power leads feed the motor, and swapping them reverses the direction of rotation. That makes the MY1016ZL flexible for builds where the motor sits on either side of the frame.
Key Features
- 24V, 250W brushed motor with a rated current of 13.4 A for predictable power draw.
- 120 RPM rated speed paired with 9.2 kg-cm rated torque for low-speed pulling power.
- 17 mm D-profile shaft, 44 mm long for a secure, non-slip fit in pulleys and sprockets.
- Reversible rotation by reversing the motor's power wires.
- Class E insulation and IP33 protection grade for normal dry riding conditions.
- Compact housing measuring 160 x 130 mm and weighing about 2.82 kg.
Specifications Explained
Voltage and power: The 24V rating and 250W output define the motor's operating envelope. Match it to a 24V battery and a controller rated for the current the motor will draw.
Speed and torque: At 120 RPM, the motor turns relatively slowly but with 9.2 kg-cm of torque. This combination is what makes it useful in geared or chain-driven setups where wheel speed is reduced further.
Shaft: The 17 mm diameter D-shaped shaft is 44 mm long. The flat on the D profile lets a set screw or clamp bite down firmly, reducing slip under load.
Insulation and protection: Class E insulation covers the winding thermal class, and IP33 indicates protection against solid objects and light water spray. It is not intended for submersion or heavy rain exposure.
Compatibility and Requirements
The motor requires a 24V DC power source and a compatible motor controller sized for its 13.4 A rated current. Direction control is achieved by reversing the two power wires. The 17 mm D shaft must match the bore and fixing method of your pulley, sprocket or coupling. No controller, throttle, brake or battery is included.
Typical Uses
This motor is commonly used on electric bikes and scooters with reduction drives, small wheelchairs and custom electric projects that need a compact 24V brushed motor. Its reversible rotation and D shaft make it adaptable to a range of mechanical layouts.
What's in the Box
- 1 x MY1016ZL 24V 250W Brushed DC Motor
Quick specs
- Item Type
- Ebike Motor
- Motor Type
- Brushed motor
- Rated Current (A)
- 13.4
- Rated Voltage (VDC)
- 24
- Rated Speed (RPM)
- 120
- Rated Torque (kg-cm)
- 9.2



















