
1 / 3 · Click to enlarge
AI Summary
A 150W 24V brushed DC motor running at 2750RPM, supplied with a 9-tooth sprocket for #25 chain. It gives chain-drive e-bike and scooter builds a compact ball-bearing motor that mounts without a separate sprocket adaptor.
Key Highlights
- 150W brushed DC motor rated for 24V operation
- 2750RPM rated speed with 2600-3000RPM loaded range
- 9-tooth sprocket machined for #25 bicycle chain
- 14.3A rated current and about 0.7 efficiency
- 1000g ball-bearing construction for smooth running
- Compact 14 x 9 x 9 cm shipping size
Ideal For
- E-bike builders assembling a 24V chain-drive setup
- Scooter and small electric cart projects
- Robotics and mechanical engineering builds
- Makers replacing a worn 24V brushed drive motor
- Hobbyists who want a sprocket-ready motor
Buying Tip
Confirm your controller is rated for at least 14.3A at 24V and that your rear sprocket and chain are #25 pitch before ordering, since the supplied 9-tooth sprocket only matches that chain size.
Elecvora expert review
Our verdict
A practical, no-frills 24V brushed motor whose fitted #25 sprocket removes one common headache from chain-drive builds. It is best treated as a modest, serviceable drive unit rather than a high-performance powerplant.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Sprocket for #25 chain already fitted
- Ball-bearing construction for smooth running
- Clear 24V, 150W, 14.3A ratings
- Compact and light at about 1000g
- Simple brushed design that is easy to wire
Cons
- Motor only, so controller and battery are extra
- Brushed design needs periodic maintenance
- Efficiency of 0.7 means noticeable heat under load
Best for
Small 24V chain-drive e-bike, scooter and robotics projects
Not ideal for
Riders wanting high power or a complete plug-and-play kit
Specifications
| Item Type | Ebike Motor |
|---|---|
| Motor Type | Brushed motor |
| Rated Current (A) | 14.3 |
| Rated Voltage (VDC) | 24 |
| Rated Speed (RPM) | 2750 |
| Operating Power | 150 |
| Operating Voltage (VDC) | 24 |
| No-Load Current (mA) | 1000 |
| Loaded RPM | 2600-3000 |
| Sprocket | 9 tooth, #25 bicycle chain |
| Efficiency | 0.7 |
| Weight (g) | 1000 |
| Shipping Weight | 1.45 kg |
| Shipping Dimensions | 14 × 9 × 9 cm |
What's in the box
- 1 x Yalu MY6812 150W 24V 2750RPM DC motor with 9-tooth #25 sprocket
Frequently Asked Questions
What voltage does this motor need?
What chain does the sprocket fit?
How fast does it spin?
Is a controller or battery included?
Does it use bearings or bushings?
How should I care for it?
Overview
The Yalu MY6812 is a brushed DC motor built around a 24V, 150W rating. It turns at 2750RPM at rated load and draws 14.3A under those conditions, which places it in the small-vehicle class rather than the high-power end of e-bike drives. The unit weighs about 1000g and uses ball bearings throughout, so the shaft runs freely and the motor is straightforward to service.
What sets this version apart is the output side: it comes with a 9-tooth sprocket already fitted for #25 bicycle chain. That means a chain-drive layout can be assembled without sourcing a matching sprocket separately, which is often the fiddliest part of a small e-bike or scooter build.
Key Features
- Brushed DC design: simple two-wire connection and easy speed control with a suitable DC controller.
- 24V, 150W rating: a modest, predictable power draw suited to compact builds.
- 2750RPM rated speed: loaded operation stays in the 2600-3000RPM band.
- 9-tooth #25 sprocket: ready for chain drive without an extra adaptor.
- Ball-bearing construction: reduced friction and smoother rotation than bushing designs.
- Compact footprint: ships at 14 x 9 x 9 cm and 1.45kg gross weight.
Specifications Explained
Power and current
At 150W and 24V, the motor draws a rated 14.3A. Your controller and wiring should be comfortable with that continuous current, and the battery pack must supply 24V. The 1000mA no-load current is the draw when the motor spins freely without driving a load.
Speed
The 2750RPM figure is the rated speed; under load it settles between 2600 and 3000RPM. Final road or wheel speed depends entirely on your gearing, sprocket sizes and wheel diameter, so plan the drivetrain around the motor's output rather than expecting a fixed speed.
Efficiency
Efficiency is listed at 0.7, meaning roughly 70 percent of input power becomes useful output. The remainder appears as heat, so allow airflow around the motor during longer runs.
Sprocket and chain
The 9-tooth sprocket is intended for #25 chain. Check that your rear sprocket and chain pitch match #25 before assembly.
Compatibility and Requirements
This is a motor only. It requires a 24V DC power source and a suitable brushed DC motor controller rated for at least the 14.3A rated current. The drivetrain must use #25 chain to match the supplied 9-tooth sprocket. No battery, controller, throttle, chain or mounting hardware is included, and no specific frame or vehicle compatibility is stated by the manufacturer.
Typical Uses
Builders commonly use motors of this class in small chain-driven e-bikes and scooters, compact electric carts, and robotics or mechanical projects where a 24V brushed motor with a ready-made sprocket is convenient. The ball-bearing construction and modest weight suit projects that need a reliable, serviceable drive unit rather than peak power.
What's in the Box
One Yalu MY6812 150W 24V 2750RPM DC motor with the 9-tooth #25 sprocket fitted.
Quick specs
- Item Type
- Ebike Motor
- Motor Type
- Brushed motor
- Rated Current (A)
- 14.3
- Rated Voltage (VDC)
- 24
- Rated Speed (RPM)
- 2750
- Operating Power
- 150




















