
1 / 4 · Click to enlarge
AI Summary
A 360° Time of Flight lidar scanner that measures up to 30 m with 4 cm resolution and streams point cloud data at 20 kHz. Its enclosed IP65 housing and slim 3.5 cm profile make it easy to integrate into robots and automated systems.
Key Highlights
- 360° omnidirectional scanning with continuous angle and point cloud output
- TOF ranging from 0.05 m to 30 m with 4 cm resolution
- 20 kHz ranging frequency for dense, high-speed data capture
- IP65 enclosed housing resists dust and water in outdoor use
- Slim 3.5 cm profile suits compact robot and equipment builds
- Brushless motor drive with 5-15 Hz adaptive scan frequency
Ideal For
- Robotics engineers building navigation and obstacle avoidance systems
- ROS developers and university research teams
- Industrial automation integrators needing 360° distance sensing
- Security and smart transportation project teams
- Makers building mapping and 3D reconstruction platforms
Buying Tip
Confirm your host controller can handle a 512000 bps UART stream and supply 5.2 V at up to 480 mA before mounting the scanner.
Elecvora expert review
Our verdict
The TG30 combines a long 30 m TOF range with a genuinely compact, IP65-protected body, which makes it a practical choice for outdoor-capable robotics and mapping work. Its 20 kHz ranging rate and flexible 5-15 Hz scan speed give integrators room to tune performance to the application.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 30 m TOF range with 4 cm resolution
- IP65 enclosed housing for tougher environments
- 20 kHz ranging frequency for dense point clouds
- Slim 3.5 cm profile simplifies integration
- Brushless motor drive for stable rotation
Cons
- Requires a 5.2 V supply and UART-capable host
- No onboard battery or wireless data link for the host
- Operating range limited to -10 to 50 °C
Best for
Robotics, ROS research and industrial mapping projects needing a compact 360° TOF scanner
Not ideal for
Users wanting a plug-and-play USB-only sensor with no controller setup
Specifications
| Detection Distance (mm) | 0.05-30 m |
|---|---|
| Model No. / Name | Laser Range Scanner |
| Distance Measuring Range(M) | 30 |
| Ranging Resolution (cm) | 4 |
| Ranging Frequency | 20000 Hz |
| Motor Frequency (Hz) | 5-15 Hz |
| Scan Angle | 360 |
| Supply Voltage | 5.2 V |
| Working Current (uA) | 400-480 mA |
| Baud Rate (bps) | UART 512000 |
| Operating Temperature (°C) | -10 to 50 |
| Laser Wavelength (nm) | 895-915 nm |
| Laser Power (W) | 85W |
| Shipping Weight | 0.214 kg |
| Shipping Dimensions | 8.4 × 4.5 × 4 cm |
What's in the box
- 1 x TG Series Lidar
- 1 x USB Type-C Cable
- 1 x USB Adapter
Frequently Asked Questions
What technology does the TG30 use for ranging?
How much distance can it measure?
What power supply does it need?
How does it connect to a controller?
Is it suitable for outdoor use?
What is included with the scanner?
Overview
The YDLIDAR TG30 is a 360-degree two-dimensional laser rangefinder that uses Time of Flight measurement to build a continuous picture of its surroundings. A rotating range module sweeps a full circle, outputting both angle information and point cloud data while it measures, so you get a live scan of the environment rather than single-point readings.
Because TOF ranging works from the time difference between laser emission and reception, accuracy stays consistent across the measuring range, and distant objects are measured with the same dependable precision as nearby ones. The unit is enclosed in an IP65-rated housing that shields the core optics, and its flat, thin body is just 3.5 cm tall, which simplifies fitting it into integrated products.
Key Features
- Full 360° scanning: the internal module rotates continuously to capture surrounding geometry.
- 30 m measuring range: covers 0.05 m to 30 m with 4 cm ranging resolution.
- High data rate: 20 kHz ranging frequency supports dense point cloud output.
- Stable drive: an industrial-grade brushless motor keeps performance consistent at 5-15 Hz.
- Outdoor-ready housing: IP65 protection and strong resistance to ambient light interference.
- Compact form: a 3.5 cm profile and lightweight build ease integration.
Specifications Explained
Range and resolution: a 0.05-30 m detection span with 4 cm resolution lets the TG30 map rooms, corridors and open areas without swapping sensors. Scan rate: the 5-15 Hz motor frequency controls how many full rotations happen per second, trading scan density against rotation speed for your application.
Data and power: point cloud and angle data travel over UART at 512000 bps, and the scanner runs from a 5.2 V supply drawing 400-480 mA. Laser: the 895-915 nm emitter meets Class I laser safety standards, and the design uses photomagnetic fusion for wireless communication and wireless power supply inside the rotating head.
Compatibility and Requirements
The TG30 communicates over a UART interface at 512000 bps and requires a 5.2 V supply capable of delivering roughly 400-480 mA. Plan for a host controller or computing platform that can accept UART data and process point cloud streams. Operating temperature is rated from -10 to 50 °C, so keep the unit within that window during use.
Typical Uses
- Robot navigation and obstacle avoidance
- Industrial automation and commercial robots
- ROS teaching and research platforms
- Regional security and smart transportation systems
- Environmental scanning and 3D reconstruction
What's in the Box
- 1 x TG Series Lidar
- 1 x USB Type-C cable
- 1 x USB adapter



Quick specs
- Detection Distance (mm)
- 0.05-30 m
- Model No. / Name
- Laser Range Scanner
- Distance Measuring Range(M)
- 30
- Ranging Resolution (cm)
- 4
- Ranging Frequency
- 20000 Hz
- Motor Frequency (Hz)
- 5-15 Hz



















