Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This load sensor is a good fit for makers, students and electronics hobbyists. Main specs: weighing load (kg) 1; hysteresis 0.03% F.S; model no. / name YZC 131.

Key Highlights

  • Weighing Load (kg): 1
  • Hysteresis: 0.03% F.S
  • Model No. / Name: YZC 131

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Weighing Load (kg)1
Hysteresis0.03% F.S
Model No. / NameYZC 131
MaterialAluminium
Dimensions (L x W x H) mm75 x 12.6 x 12.6
Rated Output1.0 ± 0.1mV / V
Non Linear Output± 0.03% F.S
Output Impedance1000 ± 10% Ω
Insulation Resistance (MOhm)2000
Repeatability0.03% F.S
Creep(5 minutes) 0.05% F.S
Zero Balance± 0.1 mV / V
Cable Length18
Operating Temperature (°C)-20 to 65
Weight (g)26
Impedance (Ω)1066 ± 10% Ω
Shipping Weight0.08 kg
Shipping Dimensions12 × 5 × 4 cm

Overview

The YZC-131 1kg Load Cell Sensor with Wires is listed in our load sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Weighing Load (kg): 1
  • Hysteresis: 0.03% F.S
  • Model No. / Name: YZC 131
  • Material: Aluminium (affects weight, heat handling and how the part wears)
  • Dimensions (L x W x H) mm: 75 x 12.6 x 12.6 (measure your mounting space before ordering)
  • Rated Output: 1.0 ± 0.1mV / V
  • Non Linear Output: ± 0.03% F.S
  • Output Impedance: 1000 ± 10% Ω

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires. This weighing Load Cell Sensor (sometimes called a strain gauge) can translate up to 1 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge, you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface. This straight bar load cell is made from an aluminum alloy and is capable of reading a capacity of 1KG of weight It has Four lead wires which can be connected to  HX711 A/D Pressure Sensor.  It is easy to use with driving voltage 5-10V and produce the output voltage as per the force changes over it. Installation of the Sensor is also the simple task, it needs to fix one end through the screw hole and the other end left floating state, according to the label indicates the direction of the gravitational force exerted particular attention must not directly push the white plastic cover part of the sensor in order to avoid damage.

Connection Diagram with Arduino via HX711:


Package Includes:

1 x Weighing Load Cell Sensor 1Kg for Electronic Scale

Quick specs

Weighing Load (kg)
1
Hysteresis
0.03% F.S
Model No. / Name
YZC 131
Material
Aluminium
Dimensions (L x W x H) mm
75 x 12.6 x 12.6
Rated Output
1.0 ± 0.1mV / V
See all specifications

Explore more