
1 / 6 · Click to enlarge
AI Summary
This CNC aluminum folding joint connects 16 mm inner diameter drone arms and locks securely with a double screw structure. Its stainless steel pivot shaft and 5-degree tilt angle make it a durable choice for building folding multirotor frames.
Key Highlights
- CNC aluminum construction for strength and rigidity
- Fits 16 mm inner diameter tubes with 19 mm outer diameter
- 70 mm length and 40 mm width for a compact profile
- Stainless steel pivot shaft resists bending
- Double screw locking reduces play after tightening
- Includes screws and accessories for center plate mounting
Ideal For
- Drone builders constructing folding multirotor frames
- Pilots replacing a damaged arm joint on a compatible frame
- Hobbyists building quadcopters, hexacopters, or octocopters
- Makers who need a sturdy metal joint for 16 mm ID tubes
Buying Tip
Confirm your arm tube's inner diameter is 16 mm and outer diameter is 19 mm before ordering, and remember to buy one joint per arm.
Elecvora expert review
Our verdict
The Z16 joint is a solid choice for building folding arms, thanks to its CNC aluminum body and stainless steel pivot. It offers secure locking and a clean 5-degree tilt, though it requires careful tube size matching.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Strong CNC aluminum construction
- Stainless steel pivot shaft resists bending
- Double screw locking reduces play
- Includes mounting screws
Cons
- Only fits 16 mm ID / 19 mm OD tubes
- Requires multiple units for a complete build
- No installation instructions included
Best for
Drone builders with 16 mm ID arms who want a durable folding joint
Not ideal for
Frames with different tube dimensions or those needing a lighter plastic joint
Specifications
| Item Type | Folding Arm Tube Joint |
|---|---|
| Outer Diameter (mm) | 19 |
| Inner Diameter (mm) | 16 |
| Length (mm) | 70 |
| Width (mm) | 40 |
| Weight (g) | 50 |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 9 × 4 × 4 cm |
What's in the box
- 1 x Z16 Aluminum Folding Arm Tube Joint
- 1 x Accessories Set (screws for center plate installation)
Frequently Asked Questions
What size tubes does this joint fit?
How many joints do I need for my drone?
Does it come with screws?
Is the joint pre-assembled?
What is the up-tilt angle?
How should I maintain the joint?
Overview
The Z16 CNC Aluminum Folding Arm Tube Joint is a dedicated connector for building or repairing folding-arm drones. Machined from aluminum, it joins two sections of a 16 mm inner diameter tube and allows the arm to fold for easier transport. The joint uses a stainless steel pivot shaft instead of a copper one, which helps resist bending over time. A double screw locking structure tightens the connection and reduces the chance of play between the carbon tube and the folding seat. The lengthened backrest design further improves clamping security. With a 5-degree up-tilt angle, it can be used to build frames with slight arm inclination.
Key Features
- CNC aluminum body: Provides a stiff, durable connection for drone arms.
- Stainless steel pivot shaft: Offers higher strength than a copper shaft and resists deformation.
- Double screw locking: Helps eliminate virtual space and keeps the joint tight after tightening.
- Lengthened backrest: Improves grip and reduces rebound when screws are tightened.
- 5-degree up-tilt angle: Suits frame designs that require a slight upward arm angle.
- Complete accessory set: Includes screws for center plate installation.
Specifications Explained
Outer diameter 19 mm and inner diameter 16 mm: These dimensions determine which tubes fit. The joint is designed for tubes with a 16 mm inner diameter and 19 mm outer diameter, so measure your arm tubes before ordering.
Length 70 mm and width 40 mm: The overall size gives you an idea of the joint's footprint on the frame. It is compact enough for typical multirotor builds but provides a substantial clamping area.
Weight 50 g: At 50 grams per joint, it is a reasonable weight for a metal connector. Keep in mind that a complete build will use multiple joints.
5-degree up-tilt: The built-in angle means the arm will sit slightly upward when installed, which may be part of your frame's design.
Compatibility and Requirements
This joint is intended for drone arms with a 16 mm inner diameter and 19 mm outer diameter. It is not a universal part; check your tube dimensions carefully. The package includes a screw set for center plate installation, but you will need the appropriate tools for assembly. No other compatibility details are provided.
Typical Uses
Use this joint when building a folding quadcopter, hexacopter, or octocopter. The number of joints required depends on the number of arms: a 4-axis drone needs 4 pieces, a 6-axis needs 6, and an 8-axis needs 8. It is also suitable for replacing a worn or damaged joint on an existing frame that uses matching tube sizes.
What's in the Box
- 1 x Z16 Aluminum Folding Arm Tube Joint
- 1 x Accessories Set (screws for center plate installation)
Quick specs
- Item Type
- Folding Arm Tube Joint
- Outer Diameter (mm)
- 19
- Inner Diameter (mm)
- 16
- Length (mm)
- 70
- Width (mm)
- 40
- Weight (g)
- 50















