
1 / 6 · Click to enlarge
At a glance
Made by Zerodrag, this drone flight controllers is a good fit for RC and FPV hobbyists. Main specs: item type Flight Controller; battery input voltage (v) 3-6S Lipo; mounting hole diameter (mm) 30.5 x 30.5mm (4mm hole size). Check that your power source supplies 3-6S Lipo before connecting it.
Key Highlights
- Item Type: Flight Controller
- Battery Input Voltage (V): 3-6S Lipo
- Mounting Hole Diameter (mm): 30.5 x 30.5mm (4mm hole size)
Ideal For
- Building or repairing a model
- Upgrading flight performance
- Spares for the field
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Flight Controller |
|---|---|
| Battery Input Voltage (V) | 3-6S Lipo |
| Mounting Hole Diameter (mm) | 30.5 x 30.5mm (4mm hole size) |
| Dimensions (L x W x H) mm | 37 x 38.5 x 7.1 |
| MCU Type | STM32F722 |
| IMU sensor | ICM42688P / MPU6000 |
| Barometer | BMP280 |
| OSD Chip | AT7456E |
| USB Port | Type-C |
| Flash Memory | 32MB |
| BEC (Y/N) | 5V: 3 Amp, 10V: 2.5 Amp |
| UART | 6 UARTs with 6 motor pads / 5 UARTs with 8 motor pads |
| I2C | SDA & SCL Pads for sensors |
| Buzzer | Supports 5V Buzzer |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 5 × 5 × 8 cm |
Overview
The Zerodrag Warp F7 Flight Controller (Made in India), made by Zerodrag, is listed in our drone flight controllers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Flight Controller
- Battery Input Voltage (V): 3-6S Lipo (note the battery type so you can order spares or the right charger)
- Mounting Hole Diameter (mm): 30.5 x 30.5mm (4mm hole size) (measure your mounting space before ordering)
- Dimensions (L x W x H) mm: 37 x 38.5 x 7.1 (measure your mounting space before ordering)
- MCU Type: STM32F722 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- IMU sensor: ICM42688P / MPU6000
- Barometer: BMP280 (space for firmware, files or media)
- OSD Chip: AT7456E
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Integrated BMP280 barometer
- Compact and lightweight design
- 32MB BlackBox-Flash for data logging
- Multiple BEC outputs for various components
- Six UARTs and I2C pads for enhanced connectivity
- Designed and Manufactured in India.
- Used for FPV Drones
- Autopilot Support
Package Includes:
1 x Zerodrag Warp F7 Flight Controller
1 x 6pin SH1.0 GPS Module Cable without Connector on other ends (100mm)
1 x 5pin SH1.0 to 5pin JST1.25 FPV Cam Cable (60mm)
1 x 5pin SH1.0 Analog VTX Cable without connector on other ends
4 x 4pin SH1.0 LED Cable without Connector on other end(150mm)
1 x 4pin SH1.0 Radio Receiver Cable (100mm)
1 x DJI 6pin Cable 80mm
1 x 8pin SH1.0 to 8pin JST1.25 4-in-1 ESC Cable (30mm)
1 x 6pin SH1.0 GPS Module Cable Connector of other end
2 x 5pin SH1.0 Analog VTX Connector of other end
5 x M3*8mm Silicone Grommets
1 x Type-C Silicone Protector
Quick specs
- Item Type
- Flight Controller
- Battery Input Voltage (V)
- 3-6S Lipo
- Mounting Hole Diameter (mm)
- 30.5 x 30.5mm (4mm hole size)
- Dimensions (L x W x H) mm
- 37 x 38.5 x 7.1
- MCU Type
- STM32F722
- IMU sensor
- ICM42688P / MPU6000


















