Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact True RMS clamp meter that measures up to 600A AC plus AC/DC voltage, resistance, capacitance, frequency and temperature. Smart Mode and non-contact voltage detection make everyday electrical checks faster and safer.

Key Highlights

  • True RMS readings for accurate results on distorted or non-sinusoidal waveforms
  • Smart Mode automatically detects and selects the right measurement parameter
  • 600A AC clamp jaw with 40.00A, 400.0A and 600A ranges
  • NCV non-contact voltage detection for quick live-wire screening
  • Inrush current and peak hold for motor starts and load spikes
  • 4000-count backlit display with built-in flashlight for low-light work

Ideal For

  • Electricians doing routine panel and circuit checks
  • Maintenance technicians tracing motor and compressor loads
  • Electronics students learning True RMS measurement
  • Appliance and HVAC service technicians
  • DIY users working on household electrical installations

Buying Tip

Confirm you have two 1.5V AA batteries ready, since they are not listed in the package, and check that your work stays within the CAT III 600V rating.

Elecvora expert review

Our verdict

The ZT-QS4 packs True RMS measurement, a 600A AC clamp, NCV and temperature into a small, affordable body, making it a sensible first clamp meter or a spare for the van. It suits general electrical checks rather than precision laboratory work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • True RMS accuracy on non-sinusoidal waveforms
  • Wide function set including capacitance, frequency and temperature
  • Smart Mode simplifies operation for less experienced users
  • Backlight and flashlight help in dim working areas
  • Compact 172 g body with a soft case included

Cons

  • Batteries are not included in the package
  • Clamp jaw is limited to AC current, not DC
  • CAT III 600V rating sets a ceiling on the installations it should be used on

Best for

Routine AC current and voltage diagnostics in domestic, commercial and light industrial settings

Not ideal for

DC current measurement or work above the CAT III 600V rating

Specifications

Shipping Weight0.318 kg
Shipping Dimensions19 × 10 × 4 cm

What's in the box

  • 1 x ZOYI ZT-QS4 TRMS clamp meter
  • 2 x test leads
  • 1 x thermocouple probe
  • 1 x black soft case
  • 1 x standard user manual

Frequently Asked Questions

Can the ZT-QS4 measure DC current?
No. The clamp jaw is specified for AC current up to 600A. DC voltage is supported, but DC current is not listed among the measurement functions.
What batteries does it use?
The meter runs on two 1.5V AA batteries. They are not listed in the package contents, so you will need to supply them.
How does NCV detection work?
Hold the meter near a conductor and the NCV function detects the presence of voltage without direct contact. Use it as a quick screening check, not as a replacement for a verified measurement.
What is included with the meter?
You receive the ZT-QS4 clamp meter, two test leads, a thermocouple probe, a black soft case and a standard user manual.
Can I measure temperature with it?
Yes. The temperature range is -30°C to 1000°C, and the supplied thermocouple probe connects to the meter for these readings.
How should I store and care for the meter?
Switch it off after use, remove the test leads and keep everything in the supplied soft case. Avoid dropping it or exposing it to moisture, and check the leads regularly for damage.

Overview

The ZOYI ZT-QS4 is a True RMS clamp meter designed for technicians, students and maintenance staff who need a single handheld tool for routine electrical checks. Instead of clamping a separate ammeter in line, you open the jaw around a conductor and read AC current directly, which makes it practical for live panels and installed wiring.

A 4000-count display, backlight and built-in flashlight keep readings visible in dim enclosures, while the compact 172 x 64 x 32 mm body and 172 g weight make it easy to carry in a tool bag.

Key Features

  • True RMS measurement for reliable values on complex or non-sinusoidal AC signals.
  • Smart Mode that identifies the measurement type automatically, reducing dial work.
  • 600A AC current across 40.00A, 400.0A and 600A ranges.
  • AC/DC voltage to 600.0V in 4.000V, 40.00V, 400.0V and 600.0V steps.
  • Resistance, capacitance and frequency ranges for component and signal checks.
  • Temperature measurement from -30°C to 1000°C using the supplied thermocouple probe.
  • NCV detection for non-contact screening of live conductors.
  • Inrush current and peak hold to capture short surges and transient peaks.
  • Auto power off and low battery alert to protect battery life.

Specifications Explained

The 600A AC clamp range covers most branch circuits, appliance feeds and small motor loads. True RMS matters when the waveform is not a clean sine wave, such as on switching supplies or variable-speed drives, because it reflects the actual heating value of the current.

Voltage ranges start at 4.000V, giving resolution fine enough for low-voltage control circuits, and extend to 600.0V for mains work. Resistance spans 400.0Ω to 4.000MΩ, capacitance covers 4.000nF to 4.000mF, and frequency reaches 1.000MHz, so the meter can handle basic component testing alongside electrical troubleshooting.

The CAT III 600V rating indicates the meter is intended for measurements on distribution circuits and fixed installations within that category and voltage. Two 1.5V AA batteries power the unit.

Compatibility and Requirements

The ZT-QS4 uses standard 4 mm test leads, and the supplied pair is ready for voltage, resistance, capacitance, frequency and temperature work. Temperature readings require the included thermocouple probe. The meter is powered by two 1.5V AA batteries, which are not listed as part of the package, so have them on hand before first use.

Typical Uses

  • Checking current draw on individual circuits and appliances.
  • Screening conductors for voltage before opening a panel.
  • Capturing inrush current when motors or compressors start.
  • Testing resistors, capacitors and continuity in bench work.
  • Measuring surface or probe temperatures during diagnostics.

What's in the Box

  • 1 x ZOYI ZT-QS4 TRMS clamp meter
  • 2 x test leads
  • 1 x thermocouple probe
  • 1 x black soft case
  • 1 x standard user manual

Quick specs

Shipping Weight
0.318 kg
Shipping Dimensions
19 × 10 × 4 cm
See all specifications

More from ZOYI

View all →

Related Products

View all →