Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 0.28-inch red LED dual meter displays DC voltage (0-100V) and current (1-100A) on one screen. It uses a five-wire connection with separate power input for stable readings, but requires an external shunt for current measurement.

Key Highlights

  • Dual display shows voltage and current simultaneously on one red LED screen
  • Measures 0-100V DC with 0.1V resolution and 1-100A current range
  • Five-wire harness with separate power input for isolated meter supply
  • Fast 500ms refresh rate for near-real-time readings
  • Compact 20 x 50mm face fits small panels and tight enclosures
  • Includes shunt resistor measuring 120 x 25 x 20mm

Ideal For

  • Electronics hobbyists building bench power supplies
  • DIY solar and battery monitoring projects
  • RC and FPV pilots checking ground station power
  • Automotive electricians testing 12V circuits
  • Makers adding panel meters to custom enclosures

Buying Tip

Confirm whether your unit includes a shunt resistor, as the 100A current range requires one and some variants ship without it.

Elecvora expert review

Our verdict

A practical dual meter for low-voltage DC projects, but the separate power requirement and shunt dependency add wiring complexity. It works well when installed correctly and offers good value for basic monitoring.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Displays voltage and current simultaneously
  • Separate power input improves reading stability
  • Compact size fits small panels
  • Fast 500ms refresh

Cons

  • Requires an external shunt for current measurement
  • Needs a separate DC power source (4.5-30V)
  • Two wiring variants can confuse first-time users

Best for

DIY electronics and battery monitoring projects

Not ideal for

Plug-and-play users or high-precision lab measurements

Specifications

Model No. / NameVoltmeter, Ammeter
Voltage Rating5VDC
ColorRed
Current consumption60
Test voltage0 to 100V
Test Current (A)1 to 100
Refresh Speed (ms)500 (one time)
Operating Temperature (°C)-10 to 60
Length (mm)20
Width (mm)50
Dimensions (L x W x H) mm120x25x20 (LxWxH) Shunt Resistor
Weight (g)14
Shipping Weight0.018 kg
Shipping Dimensions7 × 4 × 3 cm

Frequently Asked Questions

Does this meter include a shunt resistor?
The product data lists a shunt resistor in the dimensions, but some variants may not include one. The 100A current range requires an external shunt, so confirm inclusion with the seller before purchase.
Can I power the meter from the same circuit I am measuring?
Yes, if the measured voltage is between 4.5V and 30V and the supply is adequate. However, using the same supply can affect current readings; a separate isolated supply is recommended for best accuracy.
What is the difference between the yellow and green wire versions?
Both versions have the same functionality but different wiring arrangements. They ship randomly, so follow the diagram that matches the wire color on your unit.
What voltage and current can this meter measure?
It measures DC voltage from 0 to 100V with 0.1V resolution and DC current from 1 to 100A when used with an external shunt.
How often does the display update?
The meter refreshes approximately every 500 milliseconds.
What is the operating temperature range?
The meter is rated for operation between -10°C and 60°C.

Overview

The Elecvora 0.28" Dual DC Voltmeter Ammeter packs two instruments into one tiny red LED display. It shows DC voltage and current at the same time, so you can monitor a circuit without switching between modes. The meter is powered through a separate two-wire harness, which keeps its supply isolated from the measured signal and helps maintain stable current readings. A three-wire harness handles the measurement connections. With a 0.1V resolution on voltage and a 500ms refresh, it gives clear, quick feedback for bench work and installed projects.

Key Features

  • Dual red LED display: voltage and current visible together on a 0.28-inch screen.
  • Wide voltage range: test voltages from 0 to 100V DC with 0.1V resolution.
  • Current range: 1 to 100A when used with an external shunt (not included).
  • Separate power input: the two-wire harness accepts 4.5-30V DC to power the meter independently.
  • Fast refresh: updates every 500ms for responsive monitoring.
  • Compact size: 20mm length and 50mm width face fits small panels.

Specifications Explained

Voltage rating and test voltage: The meter itself runs on 5VDC (with a 4.5-30V input range on the thin red/black leads), while the measurement input handles 0-100V. This separation means you can measure a high-voltage circuit without powering the meter from it.

Current measurement: The 1-100A range requires an external shunt resistor. The included shunt measures 120 x 25 x 20mm and connects in series with the load's negative path. Without a shunt, the meter cannot read current.

Refresh speed: A 500ms update interval is fast enough for most DIY and monitoring tasks, though not for capturing rapid transients.

Operating temperature: Rated for -10 to 60°C, suitable for indoor and sheltered outdoor use.

Compatibility and Requirements

The meter requires a DC power source of 4.5-30V for the display harness. The measurement input accepts 0-100V DC. For current readings, an external shunt must be wired in series with the load. Two wiring variants (yellow or green wire) ship randomly and have the same functionality; follow the diagram for your version. If the input voltage exceeds 5V, use a buck converter to power the meter. The product does not include a shunt in all variants—check the wiring instructions for your unit.

Typical Uses

  • Bench testing power supplies and DC circuits
  • Monitoring battery voltage and current in DIY projects
  • Solar panel and small renewable energy setups
  • Vehicle electrical diagnostics and 12V accessory checks
  • RC and FPV ground stations or charging stations

What's in the Box

Package contents are not specified by the manufacturer. The meter and shunt resistor are shown in the product data, but the exact inclusion list may vary. Please verify with the retailer before purchase.

Digital Dual DC 100V 100A Voltmeter Ammetercircuit diagram

Quick specs

Model No. / Name
Voltmeter, Ammeter
Voltage Rating
5VDC
Color
Red
Current consumption
60
Test voltage
0 to 100V
Test Current (A)
1 to 100
See all specifications