
1 / 6 · Click to enlarge
AI Summary
A compact dual-display panel meter that shows DC voltage up to 100V and current up to 50A at the same time. The included shunt makes high-current monitoring simple on test benches and DIY power builds.
Key Highlights
- Dual LED display shows voltage and current simultaneously
- Measures test voltage from 0 to 100V DC
- Measures current from 1 to 50A with included shunt
- 0.28-inch display in red and blue for easy reading
- Refresh rate of about 500 ms per reading
- Compact 20 x 50 mm body fits tight panels
Ideal For
- Makers building custom DC power and battery enclosures
- Hobbyists monitoring RC and electronics current draw
- Technicians who want a permanent bench readout
- DIY solar and 12V/24V system builders
- Students learning about voltage and current measurement
Buying Tip
Plan for a separate 5VDC supply for the meter, and use a buck converter if your source is above 5V, so the current reading stays accurate.
Elecvora expert review
Our verdict
A practical, low-cost way to add simultaneous voltage and current monitoring to a DC project. It is simple and compact, but it needs a separate 5V supply and careful wiring to read accurately.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Shows voltage and current on one display
- Compact body fits small panels
- Includes the current shunt for 50A measurement
- Simple two-harness wiring
Cons
- Requires a separate 5VDC supply
- Current reading can be affected if the meter shares the measured supply
- Wiring variants may differ between units
Best for
DIY DC power, battery and bench monitoring projects
Not ideal for
Precision lab measurement or fast transient logging
Specifications
| Model No. / Name | Voltmeter, Ammeter |
|---|---|
| Voltage Rating | 5VDC |
| Current consumption | 60 |
| Test voltage | 0 to 100V |
| Test Current (A) | 1 to 50 |
| Refresh Speed (ms) | 500 (one time) |
| Operating Temperature (°C) | -10 to 60 |
| Length (mm) | 20 |
| Width (mm) | 50 |
| Dimensions (L x W x H) mm | 120x25x20 (LxWxH) Shunt Resistor |
| Weight (g) | 14 |
| Color | Red and Blue |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 13 × 5 × 4 cm |
What's in the box
- 1 x Dual LED panel ampere and voltage meter
- 1 x Current shunt
Frequently Asked Questions
What voltage and current can this meter measure?
How is the meter powered?
Can I power it from the same battery I am measuring?
What if my supply is higher than 5V?
What is included with the meter?
Why does my unit look different from a photo?
Overview
This 0.28-inch digital panel meter puts a DC voltmeter and ammeter on one small board, so you can watch voltage and current at the same time instead of switching between readings. The dual-colour LED display keeps the two values visually separate, and the module measures just 20 mm long and 50 mm wide, which makes it practical for crowded panels and compact enclosures.
It is a straightforward monitoring tool for DIY electronics, battery testing, solar and DC power experiments, and bench work where a permanent readout is more convenient than reaching for a handheld meter.
Key Features
- Two readings, one screen: voltage and current are displayed together on the 0.28-inch LED display.
- Wide voltage range: test voltages from 0 to 100V DC are supported.
- Current measurement to 50A: the supplied shunt resistor handles the high-current side of the circuit.
- Fast enough for live checks: the display refreshes about every 500 ms.
- Separate 5VDC supply: the meter is powered independently from the circuit being measured.
- Small and light: the meter weighs about 14 g and the shunt measures roughly 120 x 25 x 20 mm.
Specifications Explained
Voltage and current ranges: the 0 to 100V test range covers common 12V, 24V and 48V DC systems, while the 1 to 50A current range suits moderate-load devices and battery circuits. Current is measured through the included shunt, so the heavy current does not pass through the meter itself.
Power supply: the meter runs from a 5VDC supply. The supply for the meter should be kept separate from the measured circuit where possible; using the same source can affect the current reading. If the input voltage is above 5V, use a buck converter to bring it down.
Refresh speed: at roughly 500 ms per update, the display is suited to steady monitoring rather than capturing very fast transients.
Operating conditions: the rated operating temperature is -10 to 60 degrees Celsius, which covers typical indoor bench and enclosure environments.
Compatibility and Requirements
The meter requires a 5VDC supply to operate and is intended for DC circuits only. Wiring harnesses are included for powering the meter and for connecting the measurement ground, and the current shunt must be installed in the current path. Note that wiring variants with the same working functionality may be supplied at random, so check the harness labels before connecting.
Typical Uses
- Monitoring battery discharge and charging on DIY power packs
- Bench testing DC motors, LED drivers and small power supplies
- Adding a permanent voltage and current readout to an enclosure
- Checking current draw on RC and hobby electronics projects
What's in the Box
- 1 x Dual LED panel ampere and voltage meter
- 1 x Current shunt
Quick specs
- Model No. / Name
- Voltmeter, Ammeter
- Voltage Rating
- 5VDC
- Current consumption
- 60
- Test voltage
- 0 to 100V
- Test Current (A)
- 1 to 50
- Refresh Speed (ms)
- 500 (one time)















