Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 0.33uF polyester film capacitor is rated at 400V with 5% tolerance and radial through-hole mounting. Its compact 17x12mm size makes it a practical choice for general-purpose DC and semi-critical circuits.

Key Highlights

  • 0.33uF capacitance with 5% tolerance for predictable performance
  • 400V voltage rating suitable for many DC applications
  • Radial through-hole mounting for secure PCB installation
  • Compact dimensions: 17mm length and 12mm width
  • Lightweight at approximately 3 grams per capacitor

Ideal For

  • Electronics hobbyists building or repairing circuits
  • Technicians maintaining consumer electronics
  • Students learning about passive components
  • Designers prototyping DC and semi-critical circuits

Buying Tip

Verify the lead spacing and physical clearance on your PCB before soldering, as the radial package dimensions are 17mm by 12mm.

Elecvora expert review

Our verdict

This 0.33uF 400V polyester film capacitor is a straightforward, reliable component for general-purpose use. Its 5% tolerance and compact radial package make it a practical choice for hobbyists and professionals alike.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Tight 5% tolerance for predictable performance
  • 400V rating provides ample headroom for many DC circuits
  • Compact 17x12mm size saves board space
  • Lightweight and easy to handle
  • Low cost for budget-conscious projects

Cons

  • Not suitable for high-frequency or precision applications
  • Lead spacing not specified, may require measurement

Best for

General-purpose DC filtering, coupling, and timing circuits in hobby and repair projects

Not ideal for

Precision analog circuits or high-voltage AC applications

Specifications

ManufacturerGeneric
Capacitance0.33uF
Voltage Rating (V)400
Tolerance (%)5
Mounting TypeThrough Hole
Length (mm)17
Width (mm)12
Case/PackageRedial
Weight (g)3 each
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 0.33uF - 400V Polyester Film Capacitor

Frequently Asked Questions

Is this capacitor polarized?
No, polyester film capacitors are non-polarized, so you can install it in either direction.
What is the maximum voltage this capacitor can handle?
It is rated for 400 volts DC. Do not exceed this rating in your circuit.
Can I use this capacitor in an AC circuit?
It is intended for DC applications. For AC use, consult the manufacturer's derating guidelines, as the AC voltage rating is typically lower.
What is the tolerance of this capacitor?
The capacitance tolerance is ±5%, meaning the actual value will be between 0.3135uF and 0.3465uF.
How many capacitors are included?
The package includes one capacitor.
What are the dimensions of the capacitor body?
The body measures approximately 17mm in length and 12mm in width, excluding the leads.

Overview

The Generic 0.33uF 400V Polyester Film Capacitor is a radial through-hole component designed for general-purpose electronic circuits. With a capacitance of 0.33 microfarads and a voltage rating of 400 volts, it offers a reliable solution for DC applications and semi-critical circuits where stability and low cost are important. The 5% tolerance ensures that the actual capacitance stays close to the nominal value, which is beneficial for timing and filtering tasks.

Key Features

  • Polyester film dielectric: Provides stable performance and low inductance, making it suitable for a wide range of general-purpose applications.
  • Radial through-hole mounting: Easy to install on standard printed circuit boards with plated through-holes.
  • Compact size: Measuring 17mm in length and 12mm in width, it fits into space-constrained designs.
  • Lightweight: At approximately 3 grams each, it adds negligible weight to your assembly.
  • 5% tolerance: Ensures consistent capacitance for predictable circuit behavior.

Specifications Explained

Capacitance (0.33uF): This value is commonly used in signal coupling, filtering, and timing circuits. It stores a small amount of energy, making it ideal for low-power applications.

Voltage Rating (400V): The capacitor can safely handle up to 400 volts DC, providing a comfortable margin for many typical electronic circuits. It is not intended for continuous AC operation at high voltages.

Tolerance (5%): The actual capacitance will be within plus or minus 5% of 0.33uF, which is tight enough for most general-purpose uses without the cost of precision components.

Mounting Type (Through Hole): The radial leads are designed to be inserted into holes on a PCB and soldered, ensuring a robust mechanical and electrical connection.

Dimensions (17mm x 12mm): The length and width refer to the rectangular body of the capacitor, excluding the leads. This compact size allows for dense PCB layouts.

Compatibility and Requirements

This capacitor is compatible with standard through-hole PCB assembly processes. It requires soldering equipment and basic hand tools for installation. No additional accessories are needed. Ensure that the PCB footprint matches the radial lead spacing, which is not specified but typical for this case size. Always observe correct polarity when installing in circuits where polarity matters, although film capacitors are generally non-polarized.

Typical Uses

  • DC filtering in power supplies
  • Signal coupling and decoupling in audio circuits
  • Timing circuits in oscillators and timers
  • Snubber circuits for switching applications
  • General-purpose energy storage in low-power electronics

What's in the Box

1 x 0.33uF - 400V Polyester Film Capacitor

Quick specs

Manufacturer
Generic
Capacitance
0.33uF
Voltage Rating (V)
400
Tolerance (%)
5
Mounting Type
Through Hole
Length (mm)
17
See all specifications