
1 / 3 · Click to enlarge
AI Summary
A single 0.47uF 35V tantalum capacitor in a DIP case for through-hole mounting, rated to 5% tolerance. Its compact body and tight value window make it a dependable choice for repair, prototyping and signal-path work.
Key Highlights
- 0.47uF capacitance at a 35V voltage rating
- 5% tolerance for a tighter value window
- DIP case with through-hole mounting for easy board fitting
- Compact body suited to space-constrained layouts
- Stable passive component with no power source needed
- Single-unit pack for repairs and prototypes
Ideal For
- Electronics repair technicians replacing a specified 0.47uF tantalum part
- Hobbyists building circuits on breadboard or stripboard
- Students learning through-hole soldering and passive components
- Makers maintaining a stocked parts drawer for small builds
- Audio and signal-path tinkerers needing a tight-tolerance value
Buying Tip
Check your circuit's working voltage and required capacitance before ordering, and remember this listing is for a single capacitor rather than a pack.
Elecvora expert review
Our verdict
A straightforward, tightly toleranced through-hole tantalum capacitor that does one job without fuss. It is the right pick when your design or repair calls for exactly 0.47uF at a modest voltage.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 5% tolerance gives a predictable value
- 35V rating offers useful headroom for low-voltage circuits
- DIP through-hole case is easy to solder and replace
- Compact body suits tight layouts
- Single-unit supply is convenient for repairs
Cons
- Polarised part, so it must be fitted the right way round
- Only one capacitor per pack, not a kit
- Working voltage must stay within the 35V rating
Best for
Repair and prototyping work needing a defined 0.47uF through-hole capacitor
Not ideal for
Anyone wanting an assortment of capacitance values in one purchase
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 0.47uF |
| Voltage Rating (V) | 35 |
| Case/Package | DIP |
| Tolerance (%) | 5 |
| Mounting Type | Through Hole |
| Operating Temperature (°C) | -5 ~ 51 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 0.47uF 35V Tantalum Capacitor DIP
Frequently Asked Questions
Is this capacitor polarised?
Can I use it above 35V?
How many capacitors are included?
What does 5% tolerance mean here?
Does it need a power supply of its own?
How should I store spare capacitors?
Overview
This Generic 0.47uF 35V tantalum capacitor is a through-hole passive component supplied in a DIP case. Tantalum construction is valued for fitting a useful amount of capacitance into a small package, and this part follows that pattern: a compact body that still delivers a defined 0.47uF value at a 35V rating. The 5% tolerance keeps the actual capacitance close to the marked figure, which matters when a circuit is sensitive to value drift.
It is a single capacitor, not a kit, so it fits neatly into repair jobs, breadboard experiments and small builds where you know exactly which value you need.
Key Features
- Defined value: 0.47uF capacitance with 5% tolerance.
- Voltage headroom: rated to 35V for circuits operating below that level.
- DIP case: a familiar through-hole package that solders easily to plated boards.
- Compact footprint: small body helps where board space is limited.
- Passive design: no supply or bias needed to function in circuit.
Specifications Explained
Capacitance and tolerance
0.47uF is a sub-microfarad value often used for coupling, filtering and timing duties. The 5% tolerance means the part should sit within a narrow band around that figure, giving more predictability than a wide-tolerance alternative.
Voltage rating
The 35V rating is the ceiling for the circuit, not a target. In practice you want the working voltage to stay comfortably below it so the capacitor has margin. Do not connect it to a rail that can exceed 35V.
Case and mounting
The DIP case with through-hole mounting is aimed at conventional printed circuit boards and prototyping boards. Leads pass through the board and are soldered on the reverse side, which gives a mechanically secure joint.
Compatibility and Requirements
This is a passive two-terminal component. It needs no firmware, driver or separate power source, and it does not communicate with other devices. What it does require is a board or prototype area with through-hole pads spaced for a DIP package, plus a soldering iron and basic hand tools. Confirm that the circuit's working voltage stays within the 35V rating and that 0.47uF is the value your design calls for before fitting.
Typical Uses
- Repairing or refreshing a board that specifies a 0.47uF tantalum part.
- Breadboard and stripboard prototyping where a stable value is wanted.
- Signal-path coupling and filtering in small audio or control circuits.
- Educational projects and component stock for electronics hobbyists.
- Small production runs needing a defined through-hole capacitor.
What's in the Box
One 0.47uF 35V tantalum capacitor in a DIP case. No other parts, tools or documentation are included.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 0.47uF
- Voltage Rating (V)
- 35
- Case/Package
- DIP
- Tolerance (%)
- 5
- Mounting Type
- Through Hole











