Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 1.5F 5.5V super capacitor in an SMD coin-type case for short-term energy storage on small boards. It bridges the gap between standard electrolytic capacitors and rechargeable batteries.

Key Highlights

  • 1.5F capacitance for short-term energy storage
  • 5.5V maximum operating voltage
  • SMD coin-type multi-layer case
  • Compact 19 x 6 mm footprint
  • Lightweight at about 4 g each
  • Wide -20 to 80 percent capacitance tolerance

Ideal For

  • Arduino and microcontroller hobbyists
  • Students learning energy storage basics
  • Makers building small LED projects
  • Product designers needing a compact buffer component
  • Electronics repairers replacing a failed super capacitor

Buying Tip

Check your circuit's peak voltage stays at or below 5.5 V and confirm your board has an SMD footprint that fits the 19 x 6 mm case before ordering.

Elecvora expert review

Our verdict

A useful small-format super capacitor for low-current backup and buffer duties where a battery is overkill. Its wide tolerance and 30 ohm internal resistance mean it suits experimentation and short hold-up tasks rather than precision or high-current work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact SMD coin case saves board space
  • 1.5F storage in a light 4 g part
  • 5.5V rating matches common 5V logic
  • Wide -25 to 70 degrees Celsius operating range

Cons

  • Wide -20 to 80 percent tolerance limits precision use
  • 30 ohm internal resistance restricts high-current loads
  • Requires SMD soldering and a matching footprint

Best for

Low-power Arduino, LED and backup circuits on space-limited boards

Not ideal for

High-current pulse loads or designs needing tight capacitance accuracy

Specifications

ManufacturerGeneric
Capacitance1.5F
Voltage Rating5.5V
Tolerance (%)-20 to 80
Case/PackageSMD
Length (mm)19
Width (mm)6
Weight (g)4 each
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 1.5F 5.5V Super Capacitor

Frequently Asked Questions

What is a super capacitor used for?
It stores energy for short-term backup or buffering where a standard electrolytic capacitor is too small and a rechargeable battery is larger than needed. This part is suited to low-current loads such as small LED or Arduino projects.
What voltage can I apply?
The maximum operating voltage is 5.5 V. Keep the circuit, including any charging path, at or below that level to avoid damaging the capacitor.
Is this a through-hole or surface-mount part?
It is a surface-mount (SMD) coin-type component, so it requires a suitable PCB footprint and soldering rather than a wired connection.
How accurate is the 1.5F capacitance?
The tolerance is -20 to 80 percent, so the actual value can vary noticeably from the nominal figure. Design your circuit with margin instead of relying on an exact capacitance.
What is included when I order?
One 1.5F 5.5V super capacitor is supplied. No leads, connectors or mounting hardware are included.
How should I store and handle it?
Keep it within the -25 to 70 degrees Celsius range and avoid exceeding the 5.5 V rating. Handle the small SMD body carefully and solder with controlled heat.

Overview

This Generic super capacitor stores 1.5 farads of capacitance at a maximum operating voltage of 5.5 V. It is designed for situations where a normal electrolytic capacitor does not hold enough energy and a rechargeable battery is larger or more complex than the job requires. The coin-type multi-layer body is surface-mount, so it can be placed directly on a PCB.

Key Features

  • 1.5F capacitance in a small coin-style package
  • 5.5V maximum operating voltage
  • Surface-mount (SMD) case for PCB assembly
  • Approximately 19 mm long and 6 mm wide
  • About 4 g per unit
  • Maximum internal resistance of 30 ohms

Specifications Explained

Capacitance and tolerance

At 1.5F, the part holds far more charge than a typical electrolytic capacitor of the same size. The tolerance is -20 to 80 percent, which is wide, so treat the actual value as approximate and design with margin rather than relying on an exact capacitance.

Voltage rating

The 5.5 V maximum means the capacitor should stay at or below that level in use. It pairs naturally with 5 V logic supplies, but check your circuit's peak voltage before connecting it.

Internal resistance

A maximum internal resistance of 30 ohms limits how quickly the capacitor can deliver current. It is suited to low-current loads and backup duties rather than high-current pulses.

Temperature range

The rated category temperature range is -25 to 70 degrees Celsius, so keep the part within that window for reliable operation.

Compatibility and Requirements

The capacitor is an SMD component, so it needs a suitable PCB footprint and soldering. It works with circuits operating at or below 5.5 V. Observe polarity and charge the part correctly for the application. No connectors, leads or mounting hardware are included beyond the capacitor itself.

Typical Uses

  • Holding a charge briefly for LEDs or small Arduino projects
  • Backup or buffer storage on low-power boards
  • Learning and prototyping exercises in electronics courses
  • Compact designs where a battery is impractical

What's in the Box

One 1.5F 5.5V super capacitor.

Quick specs

Manufacturer
Generic
Capacitance
1.5F
Voltage Rating
5.5V
Tolerance (%)
-20 to 80
Case/Package
SMD
Length (mm)
19
See all specifications