Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 100 Ohm SMD single turn trimmer potentiometer provides adjustable resistance for calibration and tuning on PCBs. Its 3x3mm surface-mount package saves space and simplifies installation in compact electronic designs.

Key Highlights

  • 100 Ohm resistance with ±20% tolerance for general trimming
  • Compact 3x3mm SMD package for space-constrained boards
  • Single-turn mechanical angle of 250° for quick adjustments
  • Wide operating temperature range of -55°C to 125°C
  • Temperature coefficient of ±150ppm/°C for stability
  • Surface-mount design for efficient PCB assembly

Ideal For

  • Electronics hobbyists and makers
  • PCB designers needing compact trimmers
  • Service technicians repairing consumer electronics
  • Prototyping and DIY circuit builders
  • Industrial automation maintenance

Buying Tip

Verify the 3x3mm footprint and 100 Ohm value match your circuit before ordering, and consider buying spares for tuning projects.

Elecvora expert review

Our verdict

This trimmer potentiometer offers a practical solution for compact SMD calibration tasks, with a wide temperature range and straightforward single-turn adjustment. It is a reliable choice for general-purpose tuning where high precision is not critical.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 3x3mm size saves board space
  • Wide operating temperature range
  • Simple single-turn adjustment
  • Surface-mount design for easy assembly

Cons

  • ±20% tolerance may be too loose for precision applications
  • Single-turn resolution limited compared to multi-turn types
  • Requires SMD soldering skills

Best for

General-purpose calibration and tuning in compact PCB designs

Not ideal for

Applications requiring high precision or multi-turn adjustment

Specifications

Resistance (Ohm)100
Tolerance (%)20
Temperature Coefficient±150ppm/℃
Operating Temperature (°C)-55 to 125
Mounting TypeSMD/SMT
Mechanical Angle250° (nominal)
Length (mm)3
Width (mm)3
Weight (g)0.1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 100 Ohm SMD Single Turn Potentiometer Trimmer

Frequently Asked Questions

What is the resistance value of this trimmer?
The trimmer has a resistance of 100 Ohms with a tolerance of ±20%.
Can this trimmer be used in high-temperature environments?
Yes, it operates from -55°C to 125°C, making it suitable for many harsh conditions.
Is this a surface-mount component?
Yes, it is designed for SMD/SMT mounting on printed circuit boards.
How many turns does this trimmer have?
It is a single-turn trimmer with a nominal mechanical angle of 250°.
What is included in the package?
The package includes one 100 Ohm SMD single turn potentiometer trimmer.
What is the temperature coefficient?
The temperature coefficient is ±150ppm/°C, indicating moderate stability over temperature changes.

Overview

The Generic 100 Ohm SMD Single Turn Trimmer Potentiometer is a miniature adjustable resistor built for precise calibration and tuning on printed circuit boards. Its surface-mount design and 3mm by 3mm footprint make it ideal for modern compact electronics where space is at a premium. This trimmer provides a single-turn adjustment range, which is often sufficient for setting bias, offset, or reference levels during production or servicing.

Key Features

  • 100 Ohm resistance: Suitable for low-value trimming applications in signal paths and control circuits.
  • ±20% tolerance: Offers a practical margin for general-purpose adjustment tasks.
  • Single-turn adjustment: A nominal mechanical angle of 250° allows quick and straightforward setting.
  • SMD mounting: Surface-mount technology enables efficient automated assembly and saves board space.
  • Wide temperature range: Operates reliably from -55°C to 125°C, accommodating harsh environments.
  • Temperature coefficient of ±150ppm/°C: Helps maintain resistance stability across temperature changes.

Specifications Explained

Resistance: The 100 Ohm value is ideal for circuits requiring low resistance adjustment, such as current limiting or impedance matching. Tolerance: The ±20% tolerance means the actual resistance may vary within this range, which is acceptable for many non-critical tuning applications. Temperature Coefficient: At ±150ppm/°C, the resistance changes slightly with temperature, ensuring predictable performance in varying conditions. Mechanical Angle: The 250° nominal rotation provides a single-turn adjustment range, making it quick to set without multi-turn complexity. Operating Temperature: The -55°C to 125°C range covers most consumer and industrial environments.

Compatibility and Requirements

This trimmer is designed for surface-mount soldering onto PCBs. It requires a suitable soldering process for SMD components. No additional hardware is needed for installation. Ensure your circuit design accommodates the 3x3mm footprint and the 100 Ohm resistance range.

Typical Uses

  • Calibration and tuning of sensor circuits
  • Setting reference voltages in power supplies
  • Adjusting bias levels in amplifier circuits
  • Fine-tuning oscillator frequencies
  • General-purpose trimming in prototyping and repair

What's in the Box

Package includes: 1 x 100 Ohm SMD Single Turn Potentiometer Trimmer.

Quick specs

Resistance (Ohm)
100
Tolerance (%)
20
Temperature Coefficient
±150ppm/℃
Operating Temperature (°C)
-55 to 125
Mounting Type
SMD/SMT
Mechanical Angle
250° (nominal)
See all specifications