
1 / 4 · Click to enlarge
AI Summary
This RM065 1k Ohm trimpot is a through-hole trimmer potentiometer for precise PCB adjustments. Its compact size and screwdriver tuning make it ideal for calibration and fine-tuning circuits.
Key Highlights
- 1k Ohm resistance for precise current limiting and voltage division
- 30% tolerance suitable for non-critical adjustment applications
- Through-hole mounting for secure PCB installation
- Compact 7mm length and 6.5mm width save board space
- Operating temperature range of -10°C to 70°C
- Lightweight at approximately 0.1g per unit
Ideal For
- Electronics hobbyists building custom circuits
- Students learning about potentiometers and calibration
- Engineers prototyping sensor interfaces
- Technicians repairing or tuning audio equipment
- Makers working on Arduino or Raspberry Pi projects
Buying Tip
Check that your PCB has through-hole pads spaced to match the RM065 footprint, and consider buying spares since the 30% tolerance may require matching in critical circuits.
Elecvora expert review
Our verdict
The RM065 1k Ohm trimpot is a straightforward, reliable component for basic circuit adjustments. Its compact size and through-hole design make it easy to integrate into a wide range of projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact size saves board space
- Through-hole mounting provides secure connection
- Simple screwdriver adjustment
- Wide operating temperature range
Cons
- 30% tolerance may be too loose for precision applications
- Requires soldering for installation
- Single-turn adjustment may lack fine resolution
Best for
Hobbyist and educational projects needing basic calibration
Not ideal for
High-precision or critical industrial applications
Specifications
| Resistance (Ohm) | 1k |
|---|---|
| Tolerance (%) | 30 |
| Operating Temperature (°C) | -10 to 70 |
| Mounting Type | Through Hole |
| Length (mm) | 7 |
| Width (mm) | 6.5 |
| Weight (g) | 0.1 (approx) (each) |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x RM065 1k Ohm Trimpot Trimmer Potentiometer
Frequently Asked Questions
What is the resistance of this trimpot?
How do I adjust the trimpot?
What is the operating temperature range?
Is this a through-hole or surface-mount component?
What are the dimensions of the trimpot?
What is included in the package?
Overview
The RM065 1k Ohm Trimpot Trimmer Potentiometer is a through-hole adjustable resistor designed for fine-tuning electronic circuits. It provides a reliable way to calibrate signal levels, set bias points, or adjust reference voltages on a printed circuit board. With a compact body measuring 7mm in length and 6.5mm in width, it fits easily into densely populated boards without sacrificing performance.
Key Features
- 1k Ohm resistance: Well-suited for low-power adjustment tasks in analog and digital circuits.
- 30% tolerance: Offers adequate precision for applications where exact resistance is not critical.
- Through-hole mounting: Ensures a stable mechanical and electrical connection when soldered to a PCB.
- Screwdriver adjustment: The trimmer can be tuned using a standard screwdriver for convenient calibration.
- Wide operating temperature range: Functions reliably from -10°C to 70°C, covering typical indoor and protected environments.
Specifications Explained
The 1k Ohm resistance value means the trimpot can be used in circuits where a moderate resistance is needed, such as setting the gain of an op-amp or adjusting the brightness of an LED. The 30% tolerance indicates that the actual resistance may vary by up to 30% from the nominal value, which is acceptable for many non-precision adjustments. Through-hole mounting provides a strong solder joint, making the component suitable for prototyping and permanent installations. The operating temperature range of -10°C to 70°C is typical for consumer electronics and ensures the trimpot will function in most indoor applications.
Compatibility and Requirements
This trimpot is designed for through-hole PCB mounting and requires soldering for installation. It can be adjusted using a small flathead screwdriver. No additional components are required for basic operation, but it should be used within the specified temperature range. The compact dimensions make it compatible with standard PCB layouts.
Typical Uses
- Calibrating sensor circuits
- Adjusting audio signal levels
- Setting reference voltages in power supplies
- Tuning bias in amplifier circuits
- Educational and hobbyist electronics projects
What's in the Box
Package includes: 1 x RM065 1k Ohm Trimpot Trimmer Potentiometer.

Quick specs
- Resistance (Ohm)
- 1k
- Tolerance (%)
- 30
- Operating Temperature (°C)
- -10 to 70
- Mounting Type
- Through Hole
- Length (mm)
- 7
- Width (mm)
- 6.5














